They do not sell the xt60 male version. You need to ask them to install that for you. But only ask if you have the xt60 female charging ports on the scooter. I installed them myself with a soldering iron.
i recently got this scooter, have you had any issues with the rear motor not working? i hit a curb roughly a month ago and i was worried at first but i didnt have any issues until just now the rear motor stopped working
How hard did you hit the curb? I would assume it's your controller if it's just not spinning. If you damaged the motor it would probably not spin freely. You could have the motor wires get loose on the inside.
@@maxsinventions8913 i did some research and some interior checking, i think the wires in the motor are the issue like you said. unfortunately, i have no idea how to get into the motor itself. i’ve gotten the wheel off the scooter, but i can’t figure out how to get the axle and motor out so i can check the motor’s wires, and i haven’t found any videos of the process online.
@@albertthealpaca7712 you have to remove the wheel from the scooter and then there are 5 or 6 screws holding the motor cover on behind the brake disc. Plate can be removed with a small prybar
Hello, welcome to my channel. The charger I used is this : US $88.94 20%OFF | 72V 60V 67.2V 84V Li-ion LiPo 48V Lifepo4 Lithium Battery Charger Curren Adjust 2A 5A 10A 12A Fast Charge ebike 12S 16S 20S 24S a.aliexpress.com/_mPl3CAu You can ask the seller to set at a certain voltage. If you do this you get longer battery life. If you ask them to set the voltage limit to 65.4v then you will ensure your battery will last the longest.
Hy,can you give a link with the XT60 set you used on video? Y can't find it on aliexpress. Thanks a lot
They do not sell the xt60 male version. You need to ask them to install that for you. But only ask if you have the xt60 female charging ports on the scooter. I installed them myself with a soldering iron.
i recently got this scooter, have you had any issues with the rear motor not working? i hit a curb roughly a month ago and i was worried at first but i didnt have any issues until just now the rear motor stopped working
How hard did you hit the curb? I would assume it's your controller if it's just not spinning. If you damaged the motor it would probably not spin freely. You could have the motor wires get loose on the inside.
@@maxsinventions8913 i did some research and some interior checking, i think the wires in the motor are the issue like you said. unfortunately, i have no idea how to get into the motor itself. i’ve gotten the wheel off the scooter, but i can’t figure out how to get the axle and motor out so i can check the motor’s wires, and i haven’t found any videos of the process online.
@@albertthealpaca7712 you have to remove the wheel from the scooter and then there are 5 or 6 screws holding the motor cover on behind the brake disc. Plate can be removed with a small prybar
Hi! are you still selling the Ti30 XT60 charging ports? I couldn't find an email
Yes I am selling them. Do you want 1 or 2? Price is $20 each. Email me at maxmakestuff@gmail.com and we can proceed after that.
what 12 amp charger are you using
Hello, welcome to my channel.
The charger I used is this : US $88.94 20%OFF | 72V 60V 67.2V 84V Li-ion LiPo 48V Lifepo4 Lithium Battery Charger Curren Adjust 2A 5A 10A 12A Fast Charge ebike 12S 16S 20S 24S
a.aliexpress.com/_mPl3CAu
You can ask the seller to set at a certain voltage. If you do this you get longer battery life. If you ask them to set the voltage limit to 65.4v then you will ensure your battery will last the longest.