G17 MI-LF (Modular Integrations - Long Frame) - Stabby Glock
Vložit
- čas přidán 14. 04. 2022
- This design is entering beta very soon and will be publicly released for free once it's complete, like all of my files!
Ever wanted a Glock with a bayonet attached? No? Well, here one is anyways. - Věda a technologie
I can picture a holster that auto-deploys the blade on draw and auto-retracts on reholstering
That's honestly super doable.
That's the greatest acronym of all time.
I had printed big chungus, and the bottom of the frame was about the same length as the bayonets I and my roommates all have so I was planning on editing it to have replaceable bayonet lugs for m95 steyr and type99 arisaka bayonets. And seeing this just makes me realize how similar in our stupid ideas we have with you. And that's just brilliant
The “MILF” complete with bayonet, I love it. That’s almost as dumb yet awesome as my Heritage “RanchKeep” SBR build. Thanks for sharing this I wish more gun people could lighten up and just have fun with them. It doesn’t always have to be so serious.
It's fun to have fun, I can only hope that more gun guys remember that.
@@booliganshootingsports I agree 100%, oh the comments I have gotten on the Heritage Tactical Cowboy video I posted. You an I have similar firearms interest from cannons to Wheellocks, full auto and more; I haven’t even scratched the surface yet.
As an “old guy” (non-Fudd), I love the sheer for-the-fun-of-it gun stuff you kids are doing. It genuinely makes me smile.
as long as you don't bash an AR for its high-capacity magazines and it being "assault weapon", you're not a fudd. fudds can be young or old.
"I support the Second Ammendment...but" unless those words or some form of it comes out of your mouth, you're not a fudd
@@hoppinggnomethe4154 I said non-fudd. Re-read it youngin’. But yeah, I think folks should be able to buy their own Apache gunship if they can afford it. Or 3D print one (with several more years of 3D printing advancement).
The Glock 17 Long Dong. When things get sticky, it's ready to poke.
This is absolutely amazing and I will be making one now thanks for the awesome work!
you're bringing all the cyberpunk guns to life
Freakin awesome man. One of the coolest things yet.
Thanks for sharing it!
This is the coolest print I’ve seen in a long time
I still vote for the skittle dispenser next!
Or a PEZ dispenser ha!
*SKITTLE BREAK!*
That is an epic piece of engineering and creativity!
Nice comp. It looks like an Agency Arms 417 clone. They work quite well. These builds are getting nutty and I love them all! I wonder if a PEZ dispenser would fit in the OTF knife slot… 🤔
I THINK it would be narrow enough to fit in the MILF Module format, you might need to get creative with which mounting screws you use though.
@@booliganshootingsports haha that would be awesome to see. Dispensing lead AND snacks! Keep up the great content, much love from Texas!
Tactical Skittle dispenser!
he tried his best to say MI-LF with a straight face and thats what makes this the most hilarious thing ever
All you need to do is make another one and have them shoot out of your sleeves to complete the Equilibrium look
Just wait until I add the weighted weeble wobble magazine bases so I can throw them downrange for tactical reloads lol
@@booliganshootingsportsLOL I’d forgotten about the weeble wobble mags!
You out cybered the punk! Love it.
bro i just love those long and blocky handguns, cyberpunk style. Also, it could look really cool if you could put an integrated laser on those chunky frames
your designs are awesome thanks for the videos
the fact its name, the vibe and the features…goddamned!. This is peak performance Ohio approved gun
Use the lazermax guide rod with that!!
Badass!
"Knife, gun... *Knifegun!* Commencing Virtuous Mission..."
That is sofa king cool!
Joy, joy... happy, happy...
Love the M1 Garand in the back
That is awesome!! Now you just need to design a holster that deploys the knife when you draw. Keep up the great work.
Stabby McStab!!
Shooty Mcstab! Haha
@@NunyaBesnas PewMcStabby!
So basically a pistol version of Todd 3465's rifle from Soldier. I love it! 🤩🤩🤩🤩
Omg... I know the light itself wouldn't be a great option for a gun light but the Olight Arkfeld in that thing with the knife would be absolute maddness . You have a flashlight, lazer , and bayonet ...... 😳
Also the lightning is nice because the blade will jump off the track of its deployed against something.
Knife, gun...Knife-gun...commencing virtuous mission.
Can’t wait to appendix carry that
Nicely done wish I would have taken the route in life that had me in computer field, but instead been working in automotive and down the poor road we go.
find someone who looks at you the way Booligan looks at the bayonet on his Glock
I'd love to see the Glock from the Cowboy Bebop Movie in real life. just saying, it looks super-cool.
ATF breathing heavily wondering if you got a dog
Can we expect a G40 MI-LF version anytime soon?
WANT!
43 and 26
Spinta Precision white 17L slide with stainless SP barrel would look sweet on that 🔥
Very cool
I'd love to see a version with a maglite, if nobody else makes one, I'm gonna send it, probably gonna try a 17L with a long comp so the muzzle doesn't destroy the light
I'd love to have one of those
OMG that's so cool
Love your work, brotha! Been a fan for a few weeks now and was wondering if you've thought about takin an m9 beretta and making it a robocop replica or something like that
Already on the design agenda :)
you make the coolest shit
a microtech in a pistol? novel idea i like it
Stick a block of like 5 .22 cal barrels in the block vertically stacked that can break at the rear for reload and has an alternate trigger like a button on the side for those emergencies where u need a shotgun of .22 bullets. And then make the front flat and flush like the old chungus
Omg. Nice
Why would you not have a bayonet on your handgun if your handbook gun breaks you have an instantly deployable secondary weapon already in your hand
Very new the best Gun
The taurus gx4 seems to be a serialized chassis. Do they offer any printed frames? Or different options like sig?
I don’t know if anyone has done a GX4 frame yet.
can you do an updated shooting video on your m1887 trench gun ? that is one of the coolest gun concepts I have seen in a long time.
God damn it Booligan you've gone and done it again! Outstanding! Eveytime I watch one of you new videos I feel like jeff goldblum in jurassic park. " You did it. You crazy son of a bitch, you did it!"
Deceptively practical. 🤔
Modular Tactical PEZZ dispenser!!!
I see that Vz61 scorpion build back there and i know you said with a semi auto upper and an ar15 fcg it’s will be semi but with a full auto upper and a m16 fcg will it be full auto?
All vz61 uppers are full auto uppers. Just like (nearly) all AR uppers are full auto uppers. It’s the lower receiver and accompanying equipment in place and receiver component denials in either case that dictates whether the gun is fully automatic or not.
But to answer your question, physically, no. An M16 FCG needs the specific M16 BCG shape to trip the auto sear.
It’s all a moot point anyways unless you’re planning on committing several felonies at once.
@@booliganshootingsports thanks for the information, so basically that lower isn’t full auto capable?
@@genebaker6130 correct
Dibs on mounting a 12ga single shot underneath
Put your dog at risk 😅😂 best dig on the ATF I’ve heard
now install a flamethrower
Where did you get your 17L slide? I can never find G17L slides or barrels
I snagged mine secondhand on Reddit GAFS. They're tricky to find for sure.
i have a boatload of those Lightning otfs... my buddy is the one importing them ... you should link up w him and see what kinda deal you can strike w him. i feel hed totally support builds like this.
Do files only release when they come out on final? I'd love to get a Cyberchungus or the Halo files for a G19.
I never wanted to own Glocks, but owning them the way you design them is oddly compelling.
They’re available in beta on my subscription site, but yes, everything releases publicly when it’s done. The Halo Magnum released a while ago, the CyberChungus is releasing once I finish documentation.
You should reach out to Demolition Ranch or Kentucky Ballistics to see if those goofballs would be interested in showcasing your work
Next you need to make a pistol lower that bulges out and around the slide and has either a mounting system with a scout scope and you run with nods or instead of the scout scope and nods you place a red dot that has a circle and the front sight is also a red dot but in dot mode and you link up point of impact in dead center after looking through both
I would love this frame for a Browning hi power.
Yes it looks cool but are spring type blade weapon illegal to have
Spring assisted knives like this are legal basically everywhere.
An apple and an orange
Did the STL for this ever drop?!
Need a .410 master key insert/frame. Or a 28 gauge with a tapered barrel to.50 to keep it legal 👍... look up glock 20mm launcher.... it's an airsoft part but I think it could be manufactured and chambered in .410 pretty easily. 28 gauge would be bad ass though
I like the way you think!
You have to rifle the barrel so that it's a handgun.
If you use a smoothbore barrel, then it is an AOW.
Also, the legal classification of the actual Master Key has varied. Sometimes ATF says that mounting an AOW under a rifle does NOT change its classification. Sometimes ATF says that makes it into a SBS.
I'm not sure what the current legal ruling is.
do you make all of the guns on your wall ? i wanna buy a few lol
Some are ones I made, some are ones I collected. Nothing is for sale though.
"automatic Glock"
I like the thought of stabbing/shooting a pineapple. But you also have to do an eggplant. "Because nobody likes eggplant!" 😉
I don't have the fun money in my budget, so this is purely hypothetical. But if I were to find this glorious creation as is in my local gun store, do you have any approximate thoughts regarding what I might see on that price tag?
You can't buy it you have to make it yourself
I mean, for parts cost a 17l slide and barrel is going to run you several hundred. If you go cheap as possible maaaaayybe 300-350? Frame parts kit and the dd17 rails maybe another 100-150 or so, plus filament costs. Assuming no red dot of course. It's been awhile since I looked at prices so with post covid inflation, etc it could be way more than that. But that's probably the cheapest to make it, since you can't buy it.
Yes
YES YES
Did you use a Guardian Tactical OTF or a Microtech combat troodon ? I feel like it's one or the other
It's a super cheap Lightning Elite OTF dagger.
@@booliganshootingsports The Tanto blade would probably look better and blend with the lines in that (MILF) frame better. Not that the dagger wasn't a bad choice, but aesthetics and such.
I have a Glock 17 gen 5 standard with the strike industries mass driver compensator. So my comp attaches onto the extended guide rod instead of the barrel. I do plan on getting a threaded barrel so the comp attaches onto the extended guide rod as well as the barrel. Can the milf fit with my Glock? If so how much for a milf
You’ll need a longer comp with a standard 17 frame. You need a total of about 1.5” of length added up front on a 17 to bring it flush with the frame.
And the files will be free for you to print yourself once it’s finalized and released, like all of my printable frames.
Edit: also, this is designed to Gen 3 specs so the Gen 5 parts won’t work.
@@booliganshootingsports ok. Thank you. I put a glock 17 gen 4 on lay away. Can that be modified to fit the milf or one similar. And as far as a longer comp, would the mini king comp be a possibility or wat would you recommend?
Again, I use Gen 3 base frame designs so I don’t know what compatibility is with Gen 4 parts.
So when can I get one
this is so ridiculous you can't look away...I'll take 3
Bob Ferguson.
omg so cool 😎 😂
Got a GILF on the drawing board at all?
Asking for a fren.
😂😂
That is VERY cool, but I have a question, and you may have already answered this multiple times. On a Glock, the serialized part is the frame. So in making a glock frame, you just became a firearms manufacturer. Does this fall under the same exemption as 80% lowers? You could make that same part for a SIG P320, because the trigger group is the serialized part, but then you don't have as many options for cool ways to trick it out.
You don’t “become a firearms manufacturer”. You become an individual gun maker. There’s no exemption, it’s just legal for you to make your own firearms for your own personal use, including 3D printing them.
To clarify what Booligan is saying, a manufacturer is a business that needs a FFL Federal Firearms License.
An individual can make guns for their own non-commercial use, and no licenses are needed (federally, but some states have extra laws).
Damn love it but parts probably $1000 or more. I’ll look for cheaper slide possibilities. Keep up the crazy ideas. Love your twisted brain. Same.
I want all of this
*YES*
May we get a picture of what this looks like with the 17L slide on it?
imgur.com/a/voUrhEX
@@booliganshootingsports awesome thank you
One more question what brand of knife are you currently using?
A lightning elite OTF.
so where's the cyberchungus? It's been like 2 weeks
Honestly, thanks for the reminder. It’s going live on Odysee as soon as they process my upload.
How do you put the knife in it
You just put it in. It’s designed around a specific knife.
Now time to do it on the 26
We're gonna need a LONG comp
@@booliganshootingsports now I'm no expert in any of this but if properly vented could a 3d printed comp be possible?
@@bencullinan4419 kinda. I’ve had successes and failures with printed comps, they’re best with metal tube reinforcement. But that is a lot of weight hanging off of printed threads that moved up and down, back and forth, and gets quite warm.
How about calling it the AR14-AFT “Advanced Frame Target
WHAT!
Make a Glock Streetmaster already
Keep an eye on your phone. Blade might be calling you to replace Whistler.
I want this in a Kimber 1911 frame.... cause reasons.
British gun moment, zero ammo all stab.
Are the Brits even allowed to have the knife part?
@@mcdoctorglock as long as it is licensed as a knife
Unfortunately I may never get to play with any of your STL files. Washington state just hosed those of us who went to make our own things.
F
🔫
Months later Where is this file, I’m itching for it
It’s been in beta testing. You can certainly participate in the process.
yo you should make the gun from blade
I need this to carry on duty 😆
There is NO RAIL for my Streamlight, I am absolutely disappointed and I must also regrettably inform you that the missing rail also means I cannot mount ANOTHER BAYONETTE!!!
MY DAY IS RUINED!!!
REEEEEEEEEEEEEE!!!
We have faith in your abilities, and I am fully convinced you can move the spring assisted lever to the left AND right, just above the rail making plenty of room!
Of course I am joking, this is the GREATEST PISTOL I HAVE EVER SEEN!!!!
Is that a fake micro tech? Or a real one? I like my ultra tech but the spring broke so it’s just sittin in a drawer
It's a Lightning Elite
How do you like it? For $35 it might be worth a try.
@@flavorman9159 I have several, one is my
EDC and I play with it all damn day, lol. They’re really decent for the price.
4:30 - Bruh, haha
That looks ridiculous I’ll take 2 one in 10mm and another in .357 sig 🇺🇸😆💪🏼
This is what the offensive pistol program should have been…