Your video production has become really good (voice over, sped up, humor, tempo, etc). I always appreciate your content, but the extra effort you put into your videos separates you from others. Thanks!
The B2 air tool is a should have tool. Not sure i would use it all the time. ( Mostly because of noise ???? ) You would get more tool life from the Carbide Inserts if you use the tool for softer metals. Really testing it out cutting Weld Metal and Plasma cut edges though ?? But for a radius on sheet metal it would be Very handy. Thanks for sharing this handy tool.
@@42Fab It was Not an attack on the tools performance. My comment was to inform others IF they read my comment. I am NEVER down on someone sharing information. Chill out.
@@42Fab Who's got the attitude now.?? There was NO attitude intended. I like your channel. And like the host. Why you thought I had an attitude is beyond me. Might be how you interpretted my comment. Just for information sake. Plate Bevelling is Not a new thing. I used Bevelling machines over 10 years ago on boiler plate. Cutting 10mm bevels for weld preparation. Enough said. Apologies If you read my comments from a negative point of view. Last time commenting. Learned my lesson for being involved in the discussion..
text does not convey intention, so my mistake. "chill out" did that trick. As said, I appreciate your engagement and am glad you get something from my content. What I am not a fan of and will moderate is people INSISTING their opinion is the right one and critiquing that of others.
Do you think the tool had a harder time with making the bevel on the weld because it is much harder than the metal around the inside top of the planter that was not a welded edge like the corners?
Richard, once you find room in your shop for a brake, you will kick yourself for not getting one sooner! Even mount caster wheels to it and keep it against a wall. As always, great video! Cheers Aaron.
@@42Fab we don't have large press brake in our company we out source it, but we have small press brake which can bend plates upto 5mm of mild steel. And for long plates we bend them in multiple runs. If you want I can share it with you
Oh for sure im getting my bro trained in at the moment too, its great to see people stand back and enjoy their work learning on the job is great keeps them motivated
I like how you clamped a reference point to the planter. I will use that!
Tricks of the trade
Your video production has become really good (voice over, sped up, humor, tempo, etc). I always appreciate your content, but the extra effort you put into your videos separates you from others. Thanks!
Thanks. I try to make em how I want to watch em.
great video, the B2 Air definitely looks like something i'll buy in the future.
It's a pretty cool tool
Tip for tommy, keep your torch wrist locked when doing those long passes, use your off hand to guide you off your reference plate.
Very cool metal working router
Looking forward to seeing it used on signage, thanks for the great content!
The B2 air tool is a should have tool.
Not sure i would use it all the time. ( Mostly because of noise ???? )
You would get more tool life from the Carbide Inserts if you use the tool for softer metals.
Really testing it out cutting Weld Metal and Plasma cut edges though ??
But for a radius on sheet metal it would be Very handy.
Thanks for sharing this handy tool.
Go big or go home, the tool worked fine in worst case, that's good enough for me
@@42Fab
It was Not an attack on the tools performance.
My comment was to inform others IF they read my comment.
I am NEVER down on someone sharing information.
Chill out.
@@weldmachine I'm chill, it's also my channel, so as much as I appreciate your engagement, all attitudes can see the door
@@42Fab
Who's got the attitude now.??
There was NO attitude intended.
I like your channel.
And like the host.
Why you thought I had an attitude is beyond me.
Might be how you interpretted my comment.
Just for information sake.
Plate Bevelling is Not a new thing.
I used Bevelling machines over 10 years ago on boiler plate.
Cutting 10mm bevels for weld preparation.
Enough said.
Apologies If you read my comments from a negative point of view.
Last time commenting.
Learned my lesson for being involved in the discussion..
text does not convey intention, so my mistake. "chill out" did that trick. As said, I appreciate your engagement and am glad you get something from my content. What I am not a fan of and will moderate is people INSISTING their opinion is the right one and critiquing that of others.
metabo makes some good bevelers too. pricey!
thanks man you show the rest of us how to do job
From now on i think i need to get a welding mask to watch your videos 😵 , amazing job man keep it up 👌
Great video
Interesting bevel tool! Could've sworn that I've never heard of a router for metal before.
I've seen beveling machines before, but never this tiny
@@42Fab That too.
I think a cone shaped diamond wheel would make a cleaner 45deg.
What could be wrong with that B2, I can make my imagination run amuck real fast, faster if I did metal work like you do Richard, very cool tool !!
Do you think the tool had a harder time with making the bevel on the weld because it is much harder than the metal around the inside top of the planter that was not a welded edge like the corners?
Anywhere there was weld or plasma cutting the steel is harder
Are you ever going to get a hydraulic break press to make stuff like this?
Shop looks large, but is actually quite full, just don't have space currently
@@42Fab Where is your shop? I work at a millwrighting/Fab shop in Ontario.
Richard, once you find room in your shop for a brake, you will kick yourself for not getting one sooner! Even mount caster wheels to it and keep it against a wall.
As always, great video!
Cheers Aaron.
Cool 👍👍👍👍
Could use the B2 for removing slag/dros? Tommy keep it up 👍
I don't think it would be a good fit, the guide needs a flat surface to run on
What kind of price are we looking at? I couldn't find any approximate costs on their website. Thanks.
$450-$500
Hi I liked your work but why don't bend your planter plates so that you have to weld less ?
We do not have a break large enough
@@42Fab we don't have large press brake in our company we out source it, but we have small press brake which can bend plates upto 5mm of mild steel. And for long plates we bend them in multiple runs.
If you want I can share it with you
Hey, I have a question,can you tell what is sheet thickness?
This was all 10ga or about .1"
@@42Fab thanks
Welding it yourself kit ?
Https://www.Weldityourselfkits.com
I was sold until I saw the price for the Beveler USA B2 on eBay - $525.00
+ $14.52 Shipping
NOPE!!
When you are in business, anything that makes you faster makes you money. Imagine doing all those bevels with a file. It's only $10 though.
Ever let Tommy try downhill these joints, I nearly always run lighter stuff downhill and hot
We did some that way, all about practicing different stuff
Oh for sure im getting my bro trained in at the moment too, its great to see people stand back and enjoy their work learning on the job is great keeps them motivated
That's a pretty kool tool what's the price on it? That comes in handy when ever u need more penetration
In the $500 depending on options
@@42Fab 😱 I'll stick to my grinder lol