Ista Breeze i1500 Wind Turbine Finally Producing
Vložit
- čas přidán 5. 09. 2024
- In this video I show you my Ista Breeze i1500 finally putting some power out after one of the longest spats of still weather I can remember in my area, almost 6 weeks.
The turbine is performing well with a peak output of 1100 watts seen earlier in the day, however there appears to be some in-balance in the hub causing some slight vibration despite checking blade weight, tip distances and balance prior to erecting, will be lowering the turbine soon to check this.
So far some acceptable output and one happy off gridder here!
I have another 3 100ah LifePO4 battery packs on the way which will give 30kwh of storage, Covid issues with manufacturing in China are causing delays so just need to make do with 15kwh for now.
I hope you enjoyed the video and please like, comment and subscribe if you enjoyed the video.
The panning back and forth is telling you that the machine is too low to the ground and is sitting in turbulence. This robs the turbine of power because the wind is being diverted to several different directions instead of being cohesive.
Yeah I know, sadly I cannot get it above the tree line I’d need a 20 meter tower, once I move from here to a more open area hopefully better results.
Great stuff 👍
Glad to see it up and spinning, seems like a good wind controller you got there. Thanks for the update, see you in the next one. 😊
Thank you, yes it was great to see some output, today the weather is back to still, the controller worked well and very impressed with it. I will be adding another two 330w solar panels to the system this coming week to get things ready for the electric van I am planning to purchase for work 👍👍
Impressive work.
I have exactly the same thing that when the wind is coming from the north it's twice as powerful at the same speed or so it seems.
Wow good job 👏
Good work 😀
I could not see much vibration from the video, did you ever fix the issue? or figure it out? sometimes blades will be bent and have forward/backward thrust causing vibration
Good job! Is that the ista breeze controller as well?
.
HI Bert - What controller are you using there? ( Ebay/AliExpress item I assume ? ).
Yeah it’s from Avian Wind & Solar on AliExpress
bit close to the ground eh ?
Hello Bert, How is the turbine going? Any more experiences in lower wind? What output do you get at 5m/s? Thanks!
.
It’s still going well, best power production is in 7m/s winds I’ve found.
Bert...
You know the trees are a problem, why haven't you tried elevate this one another 7-10 meters? Surely this one isn't as top heavy as the previous wind turbine?
Unfortunately the property doesn’t belong to me, it’s my father’s property and he refused to allow me to go up any higher as he suffers from extreme paranoia. Once I can afford my own place rest assured the turbine will be up as high as I can get it safely.
@@offthegridwithbert924
Thanks, Bert... I knew there had to be a reason because you're clever enough to put these systems together and get them working, more or less.
It must be terribly frustrating though. Think he might buy off on the already proven light refraction invisibility cloak using lots of angles with large sheets of Mylar? 😎🙃🤣
@@offthegridwithbert924 No need to lift the windmill higher! It is enough to increase the number of blades with a mandatory reduction in the diameter of the turbine.
@@offthegridwithbert924
Why don’t you put up the insta in a tree :-) then you get higher
Is this sale in india
Hi!
Name of controller you use for wind turbine,thank you!
Would also like to know what MPPT controller are you using. Thanks in advance.
.
I greet you too many trees around makes the wind form swirls and does not have a fixed direction.
Because of this the turbine does not work in parameters (my opinion) 😁
Put up a 60’ tower and all your problems will magically go away.
I have the same turbine and need a high quality regukator with auto brake. Any suggestions?
Check out my video on the controller please
Hey mate, just wondering where you got the ista breeze? Anywhere in Aus?
Cheers
I got it through eBay, no Aussie sellers of it but if there was you’d be paying way more, postage was fast is was here in two weeks direct from Turkey
Hello, I'd like to ask you - What is the noise level of your iSTA breeze i1500 at 6-8m/s wind speed and are there some vibrations, sensible on your roof construction?
Hi, it’s very quiet, the noise level was much less than I anticipated, the 5 blade design is definitely quieter than a 3 blade design. There is audible noise from the alternator which you can hear below but the building is a carport so it’s not an issue, Ista do make a noise dampening mount for these turbines is noise is an issue.
@@offthegridwithbert924 Thank you.
Hi. I've got 3 blade version and its starts around 8m/s. Whats wrong with it?
3 Blade turbines are better less fowling so they spin faster, however 5 blades is bet for lower wind areas and start at lower wind speeds
anoThER webSItE VSaYS rUn it aT 24 volTs thaN 48 Volts
My friend a question, how many amperes (watts) This taurine (i1500) gives practically when the wind is good
I have seen a consistent average of 500 to 800 watts and even saw 2000w in one big gust the other week.
@Slavery is Freedom, War is Peace it’s a 48v system so amps are lower at a given wattage.
@Slavery is Freedom, War is Peace ...and the trees all over too
@Slavery is Freedom, War is Peace it's nigh on 500 watts, without knowing what the wind speed was at the time it's impossible to make a determination as to how efficient that is. He says he has seen 2k, the wind in the video did not appear to be very strong. I would say it's working pretty well, which is great news as I intend to buy one.
@@offthegridwithbert924 how many kwh does it produce in a day, week, month?
I think the turbine spouse to be vertical because the wind in rounding
Думаю 100 ват даёт
Don't buy istabreeze, they're a total waste of money, the company don't care to help either.
Rubbish, I have an istabreeze 1000W and it performs really well. It made 12kWh in one day.
@@kevinmills5293 then there's appears to be a quality control issue aswell as a customer service issue.
@@masterjones6714What do you mean? 12kWh is pretty good for 1kW turbine.