Craftsman Shed Installation Time Lapse
Vložit
- čas přidán 27. 07. 2020
- This is a Step by Step time lapse video on how to install a Craftsman 7’x4’ Shed. It wasn't too difficult, and it was fun to make! I'd recommend you have at least 2 people to help with building this shed. Have fun building!
----------------------------------------
Subscribe: czcams.com/channels/5xW.html...
Email me: miettelouinfo@gmail.com
Instagram: @miettelou_diy
----------------------------------------
Music: Balloon
Musician: @iksonofficial
----------------------------------------
Thanks for watching! - Krátké a kreslené filmy
Thank you so very much for this amazing video. You showed all the steps I needed help with. I have watched others and they weren’t helpful.
I’m so glad it helped!
You saved me so much time. Appreciate you!
Awesome, glad it helped!
I need to dissemble mine now and I can’t get to the right tools to do it. Which tool did you use to set the circles that lock each panels together? These are the one I can’t unscrew. Thank you.
How did you accomplish this on your own? I've been trying to set mine up, and the "Rails" that the side panels are supposed to slide into... just seem too tight and I can never get them to to "mate".
I eventually was able to get it done, but then you need someone else to hold the wall for you... or it will fall over and pop out... forcing you to unscrew the wall panels from each other and start over again.
I *REALLY* hate how Craftsman designed these sheds to be set up. Very easy for one wall segment to fall over while you're busy working on the next segment.
It feels like this is a minimum 2, probably should be a 3 person job.
2 People to assist with putting in the side panels. One to apply downward pressure so the tab slides under the rail, rather than sliding ABOVE the rail and another person to bang on the outside edge of the panel to slide the tab and rails together so they mate properly. A third person might be needed to hold in place the other wall segment that might tip over.
Did you have to SECURE the shed onto the foundation? It seems that it could blow off if winds were in excess of, say, 40 mph or more. I'm just concerned about having to affix the shed to the foundation.
Hi, thanks for the video! Do you know if I need some kind of foundation, or to elevate it so that on rainy days it won't flood into the shed?
Yes, it is recommended to install the shed over a 4” concrete slab or a wood platform, to provide a stable base for the shed and to elevate it off the ground. Good luck!
😂😂😂😂😂🤣🤣🤣
Did you secure base to the ground?
how long did it take to build?
What size is this shed? I’m thinking about getting one
This shed is 7’x4’. It’s great for storage.
Is that the 7x7 shed? It looks bigger than 7x4!
It is indeed the 7’x4’ shed 👍
🐕🐕
How long did it take to assemble?
I would say dedicate a few hours for the build! It’s not too difficult and is rather fun to make. Having 2 people assemble it makes it easier.
LIFESAVER!!!! You deserve a fancy steak dinner for making this video!!! Whoever wrote and printed the directions from Craftsman needs to be hit in the head with a tac hammer, they are morons!!! The directions should read just how this video shows! Thanks for saving me the headache I already have from the past half hour!!! Hope you have a great life sir!!! Hats off to you!
I’m glad it helped you! Yes, some of the manufacturer’s instructions are confusing, so glad we could make this video to help others!
Get a drill next time
Totally. My hands hurt just watching him. I just put one of these together and no way would it be fun without a cordless drill.