Pt.1 Starter Rebuild For ATV's UTV's And Motorcycles At D-Ray's Shop

Sdílet
Vložit
  • čas přidán 16. 03. 2017
  • Troubleshooting and repairing an electric starter on your ATV, UTV, or motorcycle is easier than you think. Do it yourself and save some money! Thanks for watchin', Have a goodun'!
    I created this video and I own all rights to all content in the video.
    Music provided by : Jason Shaw://audionautix.com
    Name of tunes "Throwdown", "Dirt Road Traveler", "Heading West", and "Thingamajig" Jason Shaw (audionautix.com) Licensed under Creative Commons "Attribution 3.0" creativecommons.org/licenses/b...
  • Jak na to + styl

Komentáře • 44

  • @peterward5723
    @peterward5723 Před 3 lety +2

    Thanks for the clear instructions. I can go ahead with overhauling the quad starter with confidence. Great video 👍

  • @ArcanePath360
    @ArcanePath360 Před měsícem

    Thanks so much for this. Going to attempt tomorrow on my R1200RT. Diagnostic shows battery is good but poor cranking. I hope it's salvagable

  • @ChrisJewell-mi1uy
    @ChrisJewell-mi1uy Před rokem

    Great clear video and points to take care with - worked really well for me

  • @chrismalcom4703
    @chrismalcom4703 Před 2 lety

    Thank you very much for this helpful easy to understand and follow video.

  • @bobg5823
    @bobg5823 Před 7 lety +2

    it's good to see a repair video again thanks keep them coming oh niece to see you got some help to.

    • @DRaysShop
      @DRaysShop  Před 7 lety +1

      Thanks, Randy is a much welcomed help!

  • @johncimino651
    @johncimino651 Před 4 lety

    Great video, thanks 👍👍

  • @rnh4547
    @rnh4547 Před 7 lety

    Good to see you making videos again. Missed 'em.

  • @patryolmo1286
    @patryolmo1286 Před rokem

    You guys are the best!👍

  • @jtveg
    @jtveg Před rokem

    Thanks so much for sharing. 😉👌🏻

  • @MrIFixEverything
    @MrIFixEverything Před 7 lety

    Great informative video. Thanks.

  • @setarifsetari5766
    @setarifsetari5766 Před 7 lety

    Nice to hear you again

  • @leontaylor3572
    @leontaylor3572 Před 4 lety +4

    wonderful presentation. I would love to work with you and be your helper. Man You are and awesome video maker and instructor. And I bet your a trump man. Thank you for the video. God Bless you I just subscribed and gave a thumbs up like trump does.

  • @scottexpo
    @scottexpo Před 4 lety +1

    What about that little ball bearing that fell out in the very beginning? You just ignored that? It fell out of mine when I first cracked it open also ... where does it go?

  • @donnysbackroadoutdoors5088

    I have a kymco 500i and when you start the starter grinds and sometimes starter just spins what would that be and what should I check?

  • @ildxnnyli5541
    @ildxnnyli5541 Před 3 lety +1

    Could you please give me some pointers on how to remove the needle bearing as mine has fully rotted away and I can't get the shell of it out

  • @bikersoncall
    @bikersoncall Před rokem

    I have electric start with kick-start,
    I start my bike with the Kick Starter
    98% of the time, what components if any,
    (aside from the obvious; start-motor solenoid, and battery),
    am I saving wear on?

  • @Tractors_Trucks_And_Pups

    I have an 86 4trx 350 and it clicks, I tried tapping the starter and nothing, it doesn't help the exhaust is kinda blocking everything, is there a possibility that brushes are just completely stuck?

  • @glenniaj9073
    @glenniaj9073 Před 4 lety

    were do you get one like that starter and find one we cant fine any ok

  • @victornaja7927
    @victornaja7927 Před 4 lety

    Hi if you only had a quart of oil in the quad n only run quad for 1 minute. Can that have damage engine or not.

  • @zx8401ztv
    @zx8401ztv Před 7 lety

    Lucky the carbon brushes didnt make a mess of the comms.
    So its out with the 1000 grade sand paper to make those commutators sparkling :-D.
    Ive had to use the wrong sized brushes in the past, sandpaper shapes them to fit :-D.
    Yes im a bodger lol.

  • @CHIBA280CRV
    @CHIBA280CRV Před 6 lety

    Looking good , and randy speaks ?

  • @puanz605
    @puanz605 Před rokem

    Does anyone know how to put the magnets in are they gues mine wonr stay in there

  • @claybean2290
    @claybean2290 Před 3 lety

    Whats wrong when you have no neutral light and the electric start wont work on a 1991 honda trx 300. I have to start it with a screwdriver by touchin both heads of the solenoid

  • @richardnear4160
    @richardnear4160 Před 2 lety

    Is there a starter rebuild kit for a 2012 Honda rancher 420 4x4.?
    I don't need one right now....just want to know if ones available?
    Looked on my phone.... couldn't find one right now

  • @westcoastrippers9862
    @westcoastrippers9862 Před 2 lety

    Done a few of them in my time😃

  • @honda200twinstar3
    @honda200twinstar3 Před 3 lety

    ok but what if your bike will start but not turn off? as when you turn the key off or hit the kill switch it sounds like its trying to start the engine,and the starter is getting very hot.

  • @johnbladykas4454
    @johnbladykas4454 Před 4 lety

    What did dean with

  • @lurks_4699
    @lurks_4699 Před 2 lety

    Does this work for a Ltz 400

  • @sogbryan6633
    @sogbryan6633 Před 5 lety

    D-Ray So that starter doesn't have a bedix gear like a car, does that mean that the starter turns full time along with the motor?

  • @golfernky1687
    @golfernky1687 Před 7 lety +1

    And hopefully you won't have any parts left over... Haha

  • @jeroenoppers73
    @jeroenoppers73 Před 7 lety

    and what is left over lol

    • @DRaysShop
      @DRaysShop  Před 7 lety

      Only old worn out parts my friend! ;)

    • @jeroenoppers73
      @jeroenoppers73 Před 7 lety

      Nothing more hihihihihi
      Good vlog my friend
      From the netherlands

  • @xsiner
    @xsiner Před 7 lety

    Wack it with a hammer LOL