How To: Whirlpool/KitchenAid/Maytag Electronic Control Board WPW10205839

How To Replace: Whirlpool/KitchenAid/Maytag Electronic Control Board WPW10205839 www.appliancepartspros.com/whi...
Symptoms: failed or getting an error code indicating it needs to be changed.
Tools: 1/4" nut driver.
This Whirlpool/KitchenAid/Maytag made Washer Electronic Control Board replaces the following older part numbers on Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Sears, and Kenmore Washers: W10205839.
Buy the new Washer Electronic Control Board WPW10205839 here: www.appliancepartspros.com/whi...
Most orders delivered in 2 business days or less.
If you enjoyed this video, please click the like button. Subscribe to this channel for more appliance repair tutorials.
If you need any more technical advice, call us at 1-877-477-7278 or chat with us on our website www.appliancepartspros.com/. We're available 7 days a week.
For more appliance advice, information, and tips, follow us on social media.
Facebook: / appliancepartspros
Twitter: / applpartspros

[@THEDonMaxwell]

Excellent instructional video!

[@ToneHobart]

This i s a great video instruction. I was able to fix my wahser by installing a used board that I got off Ebay... total cost was around 40 Dollars Thanks so much.

[@anthonyhyba261]

Very good video, thanks

[@appliancepartspros]

You're welcome!

[@BRH15379]

Love this video, thanks for sharing. I have a question that maybe you could help answer. My whirlpool washer has this same control board, and currently when turn on the power the LED is stuck on 'clean washer' cycle and if I press the button to change cycles it will beep but not change. Repair tech said 99% its the control board so I bought a new one, replaced it as per this video and after the power wouldn't even go on (so worse off than the last control board). I thought maybe I damaged something so I put my old control board back in and the power would come on. I thought maybe the new control board was bad so I went back to parts store and replaced it. Put the 2nd new one in and same thing....power wouldn't even go on (and definitely was plugged into the electrical socket and definitely was unplugged from electrical when I switched the boards over) So again I put my old original control board in and power would come on to the unit. Am I missing something or did I get 2 bad control boards?

[@ToneHobart]

Hi Brent, I am no expert but I have seen dozens of these boards that look exactly alike... But have different part numbers. there should abe a part number on your existing board to match up with the one you bought. mine is W10022390REL

[@alesdeve0630]

I'm having the same problem. What did you end up doing?