Get you one of them air tanks that have a quick valve that blast they are into the bead their fun in there and they work great impress your friends have a good day and thanks for the good video
@@ejhbritishcars6907 they do work great even on a front tractor tires or something like that that comes off the bead then it's hard to deal with Andy can use it for an air tank too
Set you tire bead with a bead blaster! VEVOR Tire Bead Seater, 2.1 Gal/8 L Air Tire Bead Blaster, 120 PSI Handheld Bead Bazooka, Portable Tire Inflator Tool, 85-116 PSI Operating Pressure for Tractor Truck ATV Car and Automobile Repair Amazon's Choice
@@ejhbritishcars6907while you had the air chuck filling and pulling up on second bead, try having someone go around bead with leaf blower (basically high volume low pressure air to overcome leakage) good luck 👍
@@ejhbritishcars6907 Still wasn't enough pull the tire out away from the machine so it's pushing at an angle into the steel rim and bead of the tire, and not on the sidewall.
Get you one of them air tanks that have a quick valve that blast they are into the bead their fun in there and they work great impress your friends have a good day and thanks for the good video
I saw one of these advertised recently. It does look like it would work.
@@ejhbritishcars6907 they do work great even on a front tractor tires or something like that that comes off the bead then it's hard to deal with Andy can use it for an air tank too
I will have to look into it.
Set you tire bead with a bead blaster! VEVOR Tire Bead Seater, 2.1 Gal/8 L Air Tire Bead Blaster, 120 PSI Handheld Bead Bazooka, Portable Tire Inflator Tool, 85-116 PSI Operating Pressure for Tractor Truck ATV Car and Automobile Repair
Amazon's
Choice
Looks interesting. I will have to research it a bit.
@@ejhbritishcars6907while you had the air chuck filling and pulling up on second bead, try having someone go around bead with leaf blower (basically high volume low pressure air to overcome leakage) good luck 👍
Good idea. Thanks for watching.
heres one of my secrets put a ratch strap around the outer diameter ratch it up and it helps alot with setting the tire.
I tried that using a rope and a bar to tighten, no go. The tire is very stiff, and the sidewalls hardly flex at all
I don't change many tires, so for me, it's worth having a tire shop do it.
I would too if I did not have a good balancer. Plus I wind up putting junk tires on rims just to able to move cars around easily.
It is designed for 16in tires really.
Yes, the wife's Caddy tires are a bit large for it. I will be changing some 15" tires soon, and I expect it will be much easier. Thanks for watching.
you are to close to tire machine braking the bead
That isctrue in the intro picture, but I did move it further away so that the rim was against the vuilt in stop.
@@ejhbritishcars6907 Still wasn't enough pull the tire out away from the machine so it's pushing at an angle into the steel rim and bead of the tire, and not on the sidewall.
My separate bead breaker works much better than the one on the machine, so I have been using that. Thanks for watching.