Watch This Before Buying an Expensive Table Saw Blade
Vložit
- čas přidán 31. 05. 2024
- Can you tell the difference when using a cheap table saw blade versus an expensive one? In this video I will compare an expensive Forrest Woodworker II table saw blade to an cheap Diablo blade. Which one will win?
Awesome Videos To Watch Next
Videos To Watch Next
Watch This Before Buying Video Series Playlist: • Watch This Before Buying
Clean and Protect Blades and Table Saw Top: • ULTIMATE Product to Re...
Zero Clearance Inserts for Saws: • Zero Clearance Inserts...
Join this channels membership to get access to exclusive member only discounts and perks:
/ @731woodworks
PLANS: www.731woodworks.com/store
Tools used in This Video (affiliate)
Diablo Table Saw Blade: amzn.to/2NEjzRa
Forrest Woodworker II Blade at Amazon: amzn.to/3u7hyO8
Forrest Blade at Rockler: www.rockler.com/10-x-40t-atb-...
Zero Clearance Insert for Delta Table Saw: amzn.to/2NEjIUI
Variety Pack Exotic Woods: www.wtghardwoods.com/variety-...
Delta Table Saw: www.lowes.com/pd/DELTA-Contra...
0:00 Intro
1:34 Differences in Diablo vs Forrest
3:32 Cutting with a Diablo Table Saw Blade
6:12 Cutting with a Forrest Woodworker II
8:36 Forrest Blade Worth It?
9:22 Which Blade Do I Use?
10:23 Which Table Saw Blade Should You Use
Disclaimer: Amazon and other affiliate links are used in this description and they help support this channel. By clicking on the links and purchasing items it provides me a very small commission but cost you nothing extra. It is a great way to support small creators like me. I appreciate the support more than you know!
Working with wood and power tools is inherently dangerous. Anyone using any of the tools or supplies used in these videos are personally responsible for learning the proper techniques involved, and he or she assumes all risks and accepts complete responsibility for any and all damages and injury of any kind.
Before using any hand or power tool with which you are unfamiliar, consult its operating instructions, and if necessary, seek instruction by a qualified person well versed in its operation and appropriate safety techniques.
731 Woodworks is intended for entertainment purposes only. There are no warranties implied and your results may differ from ours. You should NOT rely solely upon the information and techniques discussed and displayed in these videos. Rather, you should fully research each technique and decide for yourself what is the safest possible work method for you. - Jak na to + styl
How to clean your saw blades: czcams.com/video/oCpHWxNZT58/video.html
Yeah, there was no bias in this comparison none at all
👊🏻
i was about to ask lol thanks
@@jasonsahadeo5740 Bought my first forrest blade June3, 1998 its been kept clean and sharpened I think twice and still cuts great. Thin kerf blades can bend under load and over heat, it's a throw away blade good for rough work. I use them for working on my house, bought 2 in the past year. Just saying for fine work and longevity Forrest is the way to go.
If it's made in America, it's trash.
I thought I was splurging when I bought a Diablo blade LOL
lol
Lol right,
Agreed lol
Right there with you
Totally agree!
The burning and resistance you felt with the Forrest blade was in part because your blade was too low. The rake etc of the Forrest is designed for more height. You can read more about burning on the instruction sheet that came with the blade. The rubber coating on the blade teeth is to prevent nicking or cracking the carbide teeth. I did a comparison and the Forrest consistantly gave me a sanded smooth edge. The Diablo was ok, but just not as smooth. Thanks for the vid.
And here I thought the Diablo blades were expensive LOL
lol
I thought the same thing! I’ve had two Diablo reciprocating saw blades and they’ve lasted me a lot longer than any other blade I’ve owned.
If you look on Amazon for Diablo blades, they are the highest ranked blades as of 10-14 days ago, or maybe I just set a price range? I've seen several videos saying a higher tooth blade will reduce edge tear out, along with a tighter cover around the blade which gives edge support to your wood as close to the blade as possible, which also helps prevent tear out.
Diablo blades can be fragile depending on what they hit. But honestly, it's really stupid to resharpen Forrest at retail prices. Unless you run a cabinet shop with a regular discounted sharpening services that picks up and delivers, there is no way that a Diablo is more costly.
For framing and smaller project, I just pop on a 7.25 Diablo framing blade on a 7485 saw. Who cares if they go bad if they only cost 5 bucks and cuts all day long. ALOT less dust too. You can often find their 40 tooth finishing blade in 7.25" for very good prices on local ads. Some people sell them cheap by the bulk.
@@MintStiles it cost 20 bucks to resharpen the blade. A Diablo 10” blade range from 35-60 bucks.as well you can resharpen a Forrest blade 50 times. I have saved more in the last 3 years now running a Forrest blade then buying several Diablo blades. I burned through several Diablo blades cutting hardwood as that’s all I mainly cut. (Like 2 a week) vs sharpening my Forrest blade 3 times in the last 3 years. It’s made it’s money and more. Diablo is fine for Light hardwood but not 3” thick stuff I cut daily.
Been using the Forrest WWII for twenty years. A great investment. Very versatile. I switch to a Diablo or even cheaper blade on lumber than might have nails or dirt and rocks. If you want to be amazed try using a 7 1/4" or 8" thin kerf blade. Feels like you doubled the size of the motor.
thank you
For this to be a true test both blades would have to be of the same tooth count. Also, you should have had some sort hold down mechanism in play to keep the boards from raising off the table. I believe the burning took place near the ends because during the transition of pushing by hand then going to the push stick the blade was allowed to dwell there and and possibly burnish the board and the slight pinch it caused. I always leave the thin strips to the outside of the blade for better flow speed throughout the cut. Just my two cents.
But he mentioned the difference in teeth many times😁
@@gregboggs2708 That still doesn't compensate for the difference in tooth count. It's still comparing two entirely different blades that are designed to do two entirely different things and give you two entirely different cuts, and then trying to determine which gives a better cut. That's like comparing a V8 to a 4 cylinder, and then claiming the 4 cylinder is better because it gets better gas mileage.
I agree 💯 with you, how do you test two completely different blades against each other??!? The burning is operator error, to avoid burning, on ANY blade you've got to know how to read the grain and which direction to cut, which face up/down etc.
I bought a Forrest Woodworker II when I 1st began doing work and I was building my shop solely on the fancy pants ads in mags, silly, I know, but here, 28 years later!!!!! and I still love it every time I use it!!!! I keep it for woods ONLY!!! For all other materials I use the crappier diablo and Freud blades.
It is difficult to controll "crap construction grade" lumber when it is not flat or straight to begin with.
Terrible comparison
Why not do it fair?
The differences in the blades observed are probably more due to the fact that one is a 60 tooth and the other is a 40 tooth. Also, the Diablo is a thin kerf, while the Forrest is a full kerf blade which may make an even bigger difference. The Delta saw that you have will have an easier time driving the thin kerf than the full kerf. Commercial table saws tend to the 3hp or 5hp so the kerf difference won't matter in those cases as much.
Possibly so. Thanks
The WWII is also a thin kerf blade.
@@dimensionswoodworks This one is standard Kerf. You can see it at the beginning of the video when he shows the packaging. The thin kerf is optional.
Two very different blades. Dudester it the nail on the head. When I had a smaller HP table saw, thin kerf was the only way to go (like Diablo used here). A standard kerf blade (like WWII used here) would bog down and leave more burn marks. Add to it the additional number of teeth on one blade versus the other and the experiment has too many different variables to come to a reasonable conclusion. I’d love to see all variables the same, Diablo vs Forrest!
Love your videos 731 Woodworks.
Also the higher end blades are pretty cheap to have sharpened and you can get as many as 10 sharpenings on one blade so the overall savings over time is pretty substantial. But I totally use diablo or Freud myself. Both very good blades for the price
I feel the tooth count difference will affect the outcome and I'm personally not to thrilled with the experiment due to this simple oversight. I'd like to see it done again with same tooth count
👍🏻
Not just tooth count, but Rake also. Both factors make a significant difference in cut quality and longevity.
Stop trying to justify yourself for spending 150 on a blade :-)
@@4dchessplayer516 That Forrest blade is very nice and cheaper in the long run after all the sharpenings you get. Lot of carpenters will tell you to spend your money on high quality blades and bits, ( router or drill bits).
@@nico8587d this is what I was thinking. And when cutting plywood’s their blades are best
You are correct. My feelings exactly. I have paid a lot more than $35 for Diablo blades....90 tooth miter, 72 tooth table saw. My miter saw blade is about a year and a half old, still cuts fine.
I have been running a small wood working business for several years. I struggled with this question for a while and here is my opinion. The diablo blades are great, i like them a lot. The blade and carbide teeth tend to be thinner....so they are not hogging as much material as the thicker more expensive blades. I actually felt the diablo blades could cut thicker stock better as long as it was a fairly sharp blade. Where the thicker more expensive blades excel is the precision cuts. If you make boxes for example and you need perfect 45 degree cuts....measured to the thousands of an inch. The diablo blades either flex during the cut or just arent able to cut consistent enough to give you that type of precision. If you had a professional grade saw.....thicker (full kerf) blade....probably work better.
makes sense. Thank you
I have the same saw and recently bought high(er) end Amana and CMT blades. Personally, the longevity in sharpness of the higher quality blades outweighs the problems I encounter with a dull cheaper blade. Also, the Forrest is a full 1/8 kerf whereas the diablo or other box store blade is generally a thin kerf blade. Our saws need to work harder with the full kerf blades, but I've adjusted feed speed and am very happy :)
thank you
Most honest answer I've seen yet. As you said, for the products your making it's a no brainer. I honestly feel the same about festool. You see guys online with $5000 table saws making $100 cutting boards. Then you watch a guy in the Amazon make a cutting board with a rock and some sand and realize it's not the big $$$ tool all the time.
I just want to say thank you for the videos you make and the information you share. I’m just getting into woodworking and am really excited to develop some new skills. You’re giving me the inspiration and courage to try! I wish I had a table saw, but thankfully I have some good friends who offered theirs for me to try
Start building and the tools will come with time
A couple of further points of consideration, The HP of the saw being used. The Forrest blade is much heavier at a full1/8" kerf and massive carbide tips that can be re-sharpened numerous times (Forrest provides this service as well), The Diablo I believe is a "Thin" kerf blade at 3/32". I own the Forrest box joint set of blades and my saw is under 3hp and it is noticeable when the saw is first starting as to the weight difference as opposed to using a standard Dado set. The Freud is still a great blade, likely better for the occasional woodworker and the Forrest blade I would typically expect to see more often used in a more professional setting.
When I get a better saw I will start buying higher end blades. I can’t justify putting a 150 blade on a 300 saw. Just doesn’t seem right to me. Still saving for my sawstop
true
I have a full kerf Diablo ATBF blade. I really like it. You don’t find this one at a big box store. Only mail order or woodworking stores. Every 5th tooth is flat. I also have a Ridge Carbide full kerf combination blade. It’s a little cheaper than the Forrest but an incredible blade. Great cuts. No burning.
Yup - I’m definitely in the “disposable” blade camp here. It’s less hassle to just buy a new blade than to send it off and wait for it to come back, plus, of course, you need another blade to use while you’re waiting, so for a Forest blade it’s not $150 but $300.
I appreciate you doing beginner wood working project with beginner wood working tools. A lot of guys on YT use Festools and show how to do beginner projects. I’m not mad at them and I’d like to upgrade one day to those types of quality tools but you show people how to do it with the tools they have. God bless brother.
Thanks 👍
I’ve used both, and many other blades. The real difference comes in time. While they’ll both cut wood , my Forrest has been on my saw (the exact same saw that you have ) for over a year. And the cut quality is absolutely SUPERIOR. Especially on plywood, the finished cut is still perfect and all I’ve done is clean the blades.
On another note, the “silicone” (wax) around the Forrest is to protect the teeth from getting banged up during shipping. Also get yourself a telescopic mechanic magnet for that arbor nut that always seems to fall 😂
lol thank you
I just made the jump from "hobbyist" level blades (Diablo, etc.) to Forrest. (I paused the video right after you asked to post this.)
YES. 100 TIMES YES. I bought a dedicated cross cut and a dedicated ripping blade for my fledgling business (which YOU helped me start!) and, man, the difference is night and day. I love their performance.
I plan on buying another of each to have on hand when I send these off for sharpening.
So yeah, I don't regret it AT ALL.
Now that the video is done:
I agree with you. For a hobbyist, the Diablo is a good blade.
For a professional or semi-pro, I think the Forrest is worth it, especially if you buy dedicated blades (ripping, cross cut, laminate).
Thank you
Some folks drive a Chevy Spark and are happy, others prefer to drive Bentley. Don’t buy a Bentley if you only drive occasionally and don’t appreciate the refined handling and luxury. Sure the Spark is easier to park, gets better mileage and costs less, but ….
Don’t buy the Forrest if your saw is underpowered or if you change blades often, it is a premium blade for better performance on cabinet saws by craftsman that have come to demand the best they can find. If your saw is a contractor version or underpowered the Forrest is probably not for you. (Also if you have a sawstop). Slop in the shaft bearings, belt vibration, lack of solid dampening will all compromise that Bentley luxury. Stick to a value thin curb blade, keep a fatter wallet and a clean conscience. Good is good enough. Muck like Festool, they might be better, but still unnecessary for most craftsman. Similarly with Forrest, better to cut with a clean sharp blade using a solid setup with true square jigs than throw money into tools that won’t make a difference in your skill level.
BTW for the best results - use a blade stiffener and raise the blade to the bottom of the gullet in the cut.
Remember it’s not the tools that turn a woodworker into a craftsman, it’s the results. But tools can make it more fun.
I really appreciate that you made this video! I just asked you about saw blades a week or so ago and this is exactly what I was hoping for. Thanks so much, Matt!
Glad to help
Thanks for that Matt! Glad to hear my Diablos can still hang with the spendy blades!
I was actually surprised
good video!!! I'm just at the point where my Diablo needs to be replaced (used for a year, probably 50 hours cut time) and Mrs KiltsCanDo suggested a More expensive blade like a forrest. so this video came JIT!
👊🏻
Is it something you can actually quantify to say it's better?
I bought a 60 tooth Amana blade for my table saw 18 years ago! It has finally gotten to the point where it is too dull to use. I forget how much I paid for it, but it was over $100. I know it sounds unbelievable, but true. Now, I don't do production work and the hardest wood I cut is cherry and oak, but it has worked fine until recently. I just bought 60 and 80 tooth Diablo blades for my Delta table saw (10") and Dewalt miter saw (12"), but haven't used them yet, I'll let you know how they turn out. My old Delta 10" miter saw has gone through a ton of cheap blades, but I cut all kinds of things on it, including aluminum and Hardy board siding.
I work at Forrest manufacturing and we do servicing on all blades if there's not too many broken tips..
Somebody explained it well by saying that the value is in the longevity. Brand new, both blades will cut excellent. But when it’s time to get them sharpened, which costs about 25$, I will spend 25$ to get back basically a new 30$ blade with Diablo. I will spend 25$ to get back a new 150$ blade with Forrest.
Exactly. And some of the ulra premium blades you can get 10 sharpenings from a single blade saving a huge amount over the entire life
I'm a Diablo fan, especially compared to the factory blades on the cheaper to midrange tools. I will say that I recently had upgrade to a carbide ripping blade for 8/4 red oak on a current project. Diablo was burning and struggling. Still a Diablo fan, but learning to use the right blade for the job
They are good
You are 100% correct on the blade choice when you can buy 4 of the cheaper blades that perform well for the projects you make, I feel like that status of saying "My blades are $150 each" just proves the old saying that a "Fool and his money are soon parted" My dad always taught me do make do with what have. Great comparison!
FYI The dust collection shroud has tabs on the side that pull up and allow the side to open and give you room to add and remove blades. Thanks, awesome content.
I'd like to see more videos like this! That fence on your table saw
looks like the ones on $3500 saws. Saving up to get me one. Thanks.
thanks. It's a nice saw
If you can find them in stock,his is a delta 36-725. I bought the slightly newer 36-725t2 model that's 15amps instead of 13,and it has the thin strip ripping attachment on the fence. Its hands down the best saw in that price range($599). If you decide to get one,do yourself a favor and order the dado insert for another $39 on lowes website. I also recently found and bought an old craftsman moulding head cutter and it fits through the dado insert whereas many dado inserts are to narrow for a moulding head cutter. My saw has been dead on accurate and solid as a rock for over a year now. Hope you enjoy yours.
I absolutely love and recommend my Forrest blades. The cut quality, is amazing, the ability to resharpen is fantastic and the blades overall are just better.
For the average homeowner or DIY person. No, you don’t need Forrest. But if you care, and you use a saw daily, you’ll love Forrest.
Thank you
Agree, there are some differences between the blade, Thin Kerf (0.098" on the Diablo) and Full Kerf (0.125" on the WW2) (+27% more material to remove) ontop of the tooth difference. (40 v 60T) and tooth profile. Additionally because they are made locally (NJ) the support is local for the Professional. Given the circumstances, Matt's outcome was fair, and I would of been supprised if he recommended it for the small project maker/DIY-er.
Its essentially the saw blade version of a Festool ETS 125 vs a DeWalt DWE6423.
when you buy a professional blade they all come that way and the burning would be due from stress from the wood different parts of the wood will be stressed in different ways you got a ways to go young man
I am a Diablo combo blade guy because they are sharp: they are thin kerf; they use a very good anti-virbration system (does not ring like a bell): can be resharpened (about $20); and often on sale. Good video
Man! You have GENEROUS viewers!
I’m with you brother. For cost of one Forest River, I bought 3 Diablo blades, (24 tooth for ripping, 50 tooth for general purpose and an 80 tooth for fine finishes) for less than that one blade. I’m an average Joe so average tools are just fine for me.
Yes I do. Very generous. We have been blessed
I applied the same logic to my chop saw, and i'm well happy with it. not got space for a table saw tho...
I get my Diablo blades re-sharpened locally for $.25 per tooth ($15 for a 60 tooth) . With 4 in rotation I never have to worry about having a sharp blade on hand.
Nice
forrest blade can be sent away and get sharpened for free for life.
This does appear to be bad info. My mistake.
Right there with you, sir. I have used (not bought) some very expensive blades myself. Diablos blades are awesome and my blade of choice in my shop. I have them on my miter saw, table saw and circular saw. Thanks for the comparison and all the content you put out
thank you
Excellent job, and comparison!
Well done!
Hey Matt - just want to commend you on your hard work! I started following you when you had under 25k subscribers, and look at you now - you and Mrs. 731 are officially the hardest working couple in woodworking!
My wife and I were also married on 7/31 by the way. Maybe we should collaborate on a 731 club! Cheers!
Thank you. That’s awesome 👊🏻
@@731Woodworks Hmmmm... I am new here. I thought 0731 was 1 Corinthians 7:31- Those who use the things of the world...
Another 731 couple over here.
@@martingayle5376 I thought maybe 731 was their house number. can you clarify why you chose the name?
Been waiting on this one!
👊🏻
For a better cut,less scrap, more accurate cuts and a safer saw throw those 10" blades out the window! A smaller blade less heat,less wear and tear on your saw, more accurate, smaller curf less waste, the only time I use a 10" blade is for taller stock or a 4x4, way less $$$ than 10" too. Great video comparison. Do one on a diablo 10 and a 7 1/4 on your saw I did years ago and rarely use a 10. A 10 saw doesn't mean you need to use a 10" blade. Ask yourself this...how often do I cut something thicker than a 2x4? If number is huge use a 10 but it is so amazing how much smoother and quieter your saw runs.
Nice tips
I agree with you. Have a Wonderful and Blessed Day!!! 😀
Thank you! You too!
Love Diablo blades! Had good luck with Dewalt as well. $150? It better last all year.
lol for sure
I've actually had good luck with an Irwin Marples blade from lowes
nice
Very interesting to see this play out. Thanks for sharing.
Glad it helped
So glad you did this video! Was very curious as to how different these blades were. Thanks Matt! 😁👍
You’re welcome
I'd love to see the same test and include a 7 1/4" circular saw diablo blade on the tablesaw.
Would it fit?
@@charlieodom9107 I use a 7 1/4" Diablo on my TS when ripping and it makes a world of a difference.
and thanks again Matt for another great video
Buy one blade that I will need to spend more money on to have it sharpened, and also be without it for at least a week while it is shipped out of my shop, or buy four Diablo blades that can be swapped out in minutes and let you continue making sawdust?
It’s a no brainer. You’d need at least two Forrest blades if you don’t want down time in your shop.
Exactly
Good point.
I'm new to all this. Bought a house last year and went out and got what I think is a decent miter saw to do some upgrades to the house. My boss at my job told me to get a Diablo blade. Said I wouldn't regret it. Man.... it cut so much smoother than the stock blade. I was sold. Diablo is the way to go in my book.
We used FORREST blades in the cabinet (high production) industry. The biggest difference wasn’t cut quality for us but they had heavier carbide so they could be sharpened many times before needing to be retoothed.
One reason that the Forrest burned is the tooth geometry. The Forrest teeth are parallel and polished on the sides where the Diablo teeth are beveled on the sides for more clearance in the kerf.
Thanks for the info
I’m going to guess that, out of the box, you won’t be able to tell the difference. I think the difference is going to come over time (longevity).
Thank
How many times can you sharpen a Diablo blade?
I know Forrest blades can be sharpened multiple times.
☝🏻☝🏻☝🏻 This guy is ABSOLUTELY correct 😃
@@andrewnayl Diablo can also
@@LemonySnicket-EUC I’m willing to bet Forrest blades hold their edge longer and can be sharpened more. However, for the average person, I think Diablo blades are plenty sufficient. Forrest seems to be tailored more towards professional wood workers.
Agree with you Matt 💯. You the man, buy 4.2 Diablo blades over 150 dollar blade day or night. Love your videos,keep it up.
Thanks 👍
Something that most people don't realize; the Forrest blades don't have any anti-kickback raker teeth, only cutting teeth. On a miter saw or radial arm saw, if you don't have the anti-kickback rakers, it means the blade can go into a runaway climb or kickback easier. All 40 tooth Diablo blades have raker teeth that limit the bite, just like a chainsaw chain. If you push your saw too hard, the non-cutting raker teeth will prevent the blade from grabbing too much material and going into a kickback or (climb on a radial arm saw).
Matt, thanks for the shoutout to Working The Grain hardwoods variety pack! A virtual fist bump back to you bro. Keep up the great content and educate us all!
WTG Hardwoods
Thank you 👊🏻
I'd be interested in seeing what the results would be after using each of them for a couple months or so. Not that I'm anywhere near the $150 blade stage yet. I've still got my woodworking training wheels on. 😆
lol
Don't be afraid to buy it I bought my first one about 20 years ago I have four of the woodworker II and several other Forrest blades until they come out with something better I refuse to buy anything else
I used my woodworker 2 blade everyday in my shop and only send them out to be sharpened after 3 to 4 months worth of use a cut primarily Hardwoods such as red oak and hard maple touch me don't be afraid of the blade LOL
Thanks for this video. Watching this led me to watch some of your other content. I'm recently retired and was planning on doing some woodworking to sell and supplement my income. I'm finding your videos informative and inspirational. Thanks for that. I'm looking forward to watching your past and future content.
Thank you
Thanks for posting this! It's time for me to change my saw blade on my table saw. And I recently purchased a 5 1/2" 20V Porter Cable saw that needs a blade, because the one that came with it doesn't cut worth a flip. I now know which brand to get for both of these.
Glad I could help
I really hope there’s not much a difference, just so I don’t need to start wanting one.
👍🏻
I’ll never be without my Forrest.
👊
Glad to hear you're sticking with Diablos. They have been my blades of choice on my TS (same 1060X) & CS (0760). Just love them. And for those claiming longevity of the Forrest, I wonder if it is more than 4.2 times long lasting without sharpening?
I wouldn't think so
Totally agree. I have a SawStop and it’s much easier and quicker to change blades. I use Diablo blades and get great cuts. I use a 24 tooth rip blade for ripping and a 60 or 80 tooth for other cuts. The 24 tooth rip blade is extremely smooth and delivers excellent results with no resistance. Another consideration is that if I ever get a brake activation it’s a lot less to replace a Diablo than a more expensive blade.
haha I can't even get my head around those expensive blades LOL not only can I not afford them I to use Diablo and the same one for quite some time now and have even cut through a screw not intentionally and its still cutting good not great as before but I would still be kicking myself had I done that on a $150.00 blade LOL
For sure they are very expensive
try a ridge carbide blade and start wearing your dust mask with these woods your lungs cost more than any saw blade
thanks
Pshh, saw dust makes you 💪. Guess bullying is bad too?
The difference between a Diablo thin kerf blade and say a Forrest full kerf blade, is the fact that the full kerf blade is going to be more stable during a cut. One thing that I've noticed with the Diablo, and don't get me wrong I use a lot of Diablo blades for certain things, is that when cutting wood with particular grain patterns the blade will Flex slightly as it tries to follow the grain during the cut. This isn't because there's anything "wrong" with the blade except the fact that it's thin. The forest blade is made from a much thicker piece of Steel and therefore is less susceptible to flex during a cut. This is really only important when you are doing very high high-precision jointing operations. I build musical instruments, and when I need really tight precision (I.e. very very straight cuts) I always reach for a full kerf blade.
Thank you for sharing that
Honest opinions, love it! Thanks!
"Ripping boards and praising the lord!"
Your welcome lol
ha, that is fantastic!
The Forrest blade has a much higher amount of carbide on the teeth and is able to be sharpened numerous times. It will far outlast your next $150 in diablo blades. At this level woodworkers are likely sharpening the blades themselves.
Thank you for the info
I was part of a crew installing kitchens in a hi rise in NYC. The cabinets were a gel coat . Cutting fillers we would use the Diablo Blades. They were excellent. Any cheaper blade chipped cuts after one apartment, and Diablo Blades lasted for 2 floors of Kitchens. And would still be good for cutting anything that didn't have a hi dollar finish. Can't beat those blades.
Awesome!
Yes I use them both. They each have there own use. Biggest difference to me my contractor saw I started with has less power for 1/8 kerf of the Forrest but Diablo being thin kerf. However my 12” 5 hp cabinet saw which has power like crazy I mostly use the Forrest. Saw power makes a difference too!
awesome. thanks for sharing
I dont think it was a fair test with the tooth count being different, That being said no way I can afford 150 for blade.... Diablo yes
👍🏻
I have been using DeWalt blades for the past ten years,they offer a extremely good quality cut of hardwood and plywood for the money. I use DeWalt blades on all three of my miter saws ,on my 10 inch 12 in and my table saws and my radial arm saws with no problem
To me it looked like the kerf of your blades were different. The Forest is taking a lot of wood out at one time (better for more hp saws) The Diablo was taking out less wood... The thin kerf will help when you only have a 2hp saw or less. This is why I bought the Spyder blade rather than the manufacture blade. Thanks for doing this video!
If you get burns on a rip cut it means one of two things... 1, feed rate is not matching saw power or 2, fence and blade are not parallel. More often it's #2. You mentioned you noticed tighter tolerances for the arbor hole, the entire blade from Forrest is like that. The Diablo has more flex and different tooth geometry to compensate for the slightly looser tolerances of its target market giving the perception of keeping up with the Forrest blade. Your Delta table saw is a good saw and can be dialed in well. If you take an hour or so to get OCD with aligning the trunions to your miter slot and the fence to the blade then magic will endow your saw and you'll really see the difference a higher dollar blade can make.
Thank you
I have the diablo 50 tooth combination blade in my table saw and the compound miter saw. Haven't looked back since!! Great video.
Good choice!
Long time Freud customer. Love having a good ripping blade and a good plywood blade. And I don't mind it when I need to replace them
Diablo is my go to for everything. Circular saw blades, sand papers, spade bits, jigsaw blades, and recip blades. All excellent
Awesome
Ok, this makes me happy--that Chechen has 2x the hardness of black walnut. My table saw was binding up all day yesterday on some reclaimed wood, & it drove me nuts.
I love that you used the free blade you got to test for us beginners....great video brother, I hope you’re able to do more “vs.” videos!!!
More to come!
I buy all Diablo cutting implements. I bet the expensive blade would probably last longer because they’re known to use a TON of carbide on their teeth. But when most people think their saw blade is dulling, it usually just needs a good cleaning. But you can also send your carbide toothed Diablo blade in for service and sharpening. Most people don’t know that.
I'm a trim/cabinet carpenter with 15 years in the craft I used to favor Irwin blades until about 6 years or so ago when I had to buy a diablo 7 1/4" in a pinch and I loved the ease of the cut not the speed it doesn't really cut faster then any other blade but it's definitely a clean crisp cut line also I noticed that the 6 1/2" diable blade on my 20v dewalt skill saw lasted alot longer by atleast %30 I just wished they made diablo vibra-saw blades or maybe they do and I haven't seen the yet ...anyway stick with diablo Matt you won't regret it and I love your chanell keep making saw dust!
I like your channel and expected better on this one. I have had a Forrest blade and it is incredible. Also very expensive. I bought mine 22 years ago for a specific project. It makes more precise cuts and the cuts leave no saw marks.
I would never let my Forrest blade get gummed up cutting soft wood. I only put it on my table saw when I am making final cuts on hardwood. 22 years later it still makes flawless, no sanding required, cuts.
+ 1 for Working the Grain Hardwoods in Bentonville, AR. Great selection of domestic and exotic woods, very knowledgeable, very friendly, and GREAT prices.
I really appreciate them
I have an Inca Table Saw that I restored, and the only blade I could find for it with a 20mm arbor hole was an 8" 40 tooth from Forest. I have come to love the blade I got from them as it cuts like a dream. I have another table saw that has a 10" 60 tooth Diablo installed, and I find myself using the Inca with the Forest Unless I am ripping sheets in which case an Inca is to small.
thanks
Get a magnetic wand for when you drop the nut down in your table saw dust collection. Much easier than fishing it out by hand. You can get one that is good enough at Harbor Freight for $3.
Best test ever. I would've said the same thing. That is a very reasonable answer for everyone. 4.2 Diablos...... you right
One other thing I would like to point out is you and your channel caters more towards the weekend warrior or DIY'er, so a less expensive blade makes more sense. That why 90% of the comment agree with you. However, a full blown cabinet maker or a custom fine woodworker are going to appreciate the quality and longevity of the higher end blades. That is like saying a Festool anything is no better than a lower end power tool, sure they both get the job done, but we both know that there is a difference. It all depends on the kind of work you do, that drives the quality of tool you use.
That's why I say towards the end of the video, for a beginner woodworker, go with the Diablo
Great content! I agree. I use the Diablo 90 tooth blade for everything
nice
I personally prefer CMT blades, they have about 7-10 sharpenings, the Diablo ones have about 3 and your big box stores only have what you get from the store (0) The more “expensive up front” blades end up being less expensive even with sharpenings. You’re paying for longevity. You can buy a $30 blade and get one use out of it, or buy a $150 blade and get 7 or more uses. Also don’t use the manufacturer for sharpening, find someone else that you can trust. Jonathan Katz Moses did a video on the CMT blades and I love them.
I really like the Diablo blades. I also have Freud thin kerf blades for my job site saw. Less teeth for ripping and a dedicated rip blade will make a big difference. I would say the burning was because the saw bogged down a little.
Thank you. You just save me a lot of money.
Glad I could help!
Great comparison video. Thanks for sharing. My cheap table saw (135 Euro - 160 USD) came with 2 blades included in the price.
No name brand of the blades but the cutting is OK. I don't use the table saw very often yet. I only have it 4 months in use now.
My sliding mitre saw is more than 10 years old. Last year I changed the blade for the first time. It had become "a little" dull.
I bought some 7€ (9USD) saw blades and I couldn't believe how much difference that makes. I hope to spend more time in my shop the coming years.
So maybe in the future I'll buy expensive DIABLO blades.
👍🏻
You are right, unless you’re a professional making high-end items. Appreciate your work.
I appreciate that!
good video thanks for the info
You bet
I use a 40 tooth for almost all my table saw work. The only exception is real thick material, which I use a 24 tooth ripping blade. I have used a 60 tooth blade for plywood, but I usually just stick with my 40 tooth. My radial arm saw and miter saw keep 60 tooth blades for clean crosscut. I've never had an expensive blade. My rip blade is an old irwin marathon blade and my 40 tooth is an Irwin marple blade I've had for years. I have other old blades I've bought and sharpened from discount stores and flea markets
I briefly looked over the comments and one thing I didn't see is that when ripping you want 3 to 5 teeth to be in the wood at any given time to avoid burning. It looks like with both blades you kept about the same amount of blade exposure above the wood you were cutting. Given that the Diablo had more teeth in the stock than the Forrest, that puts the Diablo at more of a disadvantage, which translates to another plus to the Diablo. In my experience with Freud blades, they give just as good of a cut, though maybe not so much through knots.
But here's the big difference for me, the Forrest blades last a very long time, and if you treat them right, you're not going to be sending them back to Forrest for sharpening very often. Also, the Forrest blade has more carbide and it is a higher grade, hence, less need for sharpening. Forrest also makes sure that sharpened/repaired blades come back to you as good as new. Further, the Forrest blades retain their value for a long time. I just sold my two 23 yr old thin kerf Forrest blades, as I upgraded to a Sawstop 3hp model, for $125, about half of the original price I paid for them at the time. I am a fairly advanced woodworking hobbyist so they got a lot of use over that time. Lastly, the Forrest is more versatile than the Diablo so you won't need as many blades - less money spent. But yes, for a newbie i agree, the Diablo is a better choice.
Thanks Matt, Diablo 12" on my miter saw and I just got a two pack of 10" Dewalt 40 and 80 tooth. Have not installed yet. I will let you know if I like the d,walt when I use one. Diablo has served me well on the miter saw so far. Very fine cut.
I like DeWalt blades as well
@@731Woodworks Update, put dewalt 80 t on the cobalt 10-15 t/saw. It works like a knife through butter and very smooth cut. Made a drawer for my wrk table just for kicks and it did great. Just thought you would like to know.
I have been using Diablo 10" saw blades for many years. I have never been disappointed with the results.
👊🏻
I'm an Old General Contractor. I have and have used both blades. Despite the tooth count differences and the thickness differences I would choose the Forrest blade if I could have only 1 Blade. I've had a Forrest WW2 last 2 years on a table saw before it was sent back to Forrest for sharpening. I would change out the Diablo every 3-4 months with the same usage. I get glue line rips with the WW2 but not the Diablo. It really depends on what you cut most. Plywood? Diablo , hardwood? Forrest no question.
I have a Diablo on my mitre saw and makes very nice cuts but since I bought the Forest blades at a wood show for my tablesaw that's what I'm using on it and it sure does make some clean cuts
👊🏻
I enjoyed your video. My reason for buying expensive blades like the Forester is because there sharpenable. If you signed a Diablo off to be re sharpened the person that gets it is first going to laugh and second do a minimal amount of sharpening. Diablo and other blades in that price range use thinner carbide with a much looser grain structure. They really aren't meant to be re sharpened. When you look at the cost of sharpening the Forester makes much more sense. It's a tougher Blade with better carbide. Sometimes the old adage is true! You get what you pay for