Very cold start of my 86 Chevy short bed with a 454 BBC
Vložit
- čas přidán 14. 12. 2016
- Hello and welcome to the SwS Crash Channel. I make videos of all Forza's and other games like The Division and also BeamNG.Drive. , GTA 5 ONLINE.
I also do day in the life videos and live event like mud bogs truck pulls and demos and working on cars. I am a Pennsylvania state inspection mechanic in Butler pa - Hry
Someone ether shorten the frame on that or did moter and axle swap I've never seen a short bed 3/4 Ton with a big block and 4 speed always long bed nice truck tho brother 🤘🏻
Yeah I put the big block in it I did 3/4 rear end swap put a manual 5-speed out of a 92 and it I did all the work to it
SwS Crash nice work bro I have a few square body's myself 67-86 83 k-5 as well they just don't make trucks like they use to
@@brytonburns5826 that they don't trucks now a days and throw aways
Yeah I put the 3/4 ton running gears in it and I took a 454 out of a wrecked 93 swish it from throttle body to the carburetor by changing the intake and I used a 86 4 speed. And once the 4 speed I lost 3erd in I put a 5 speed out of a 91 in besides that I never really had any problems with it besides just doing maintenance to it
@@brytonburns5826 I also have an 83 k5, swapped a big block in it from a 89 c1500 suburban
You need to pump the throttle slightly after it starts.
This will help mimic having a choke keeping the mixture rich until the engine, mostly the intake is warm enough to vaporize the fuel
Love the truck! Keep them coming
I definitely miss this truck babe 😘 lots of memories
Someone is in a good mood ;)
" stay running you cold blooded bitch”😂🤣
Alittle advice if your going to start it in the winter often get a choke so you dont have to sit out side till the engine warms up on the throttle
Cool tach
I've had this with my 76 Chevy stepside
Hello! Very nice truck, thanks for this video
where is it located? very beautiful terrain
Whoa Froggy95? 95.1? You must be close to me I'm from Masury OH right on the PA border
Froggy 101.3 here in NEPA
My 86 had a choke, just pump the peddle once and boom then when its warm hit the peddle again
Yeah I had a brand new all manual elderbrock 650 on never had to use the coke on it
@@swscrash ohhh
Hunter lingel I put the choke on mine it installed it in the ash tray so it’s hidden pretty cool
That's a pretty cool idea 👍
Sweet truck, and I love the big block. Froggy 99.9?
I believe. I no longer have the truck sold it to a really close friend that is totally restoring the truck
@@swscrash if it is froggy 99.9 you're not too far from me.
Yeah for me here it's froggy 95.1. I'm in Butler PA
@@swscrash nope, that's a different froggy 99.9 then. I'm in fargo, ND
@@andy347495 wow yeah
That’s actually not bad to be that cold and with no choke
Not long ago picked up a 84 short bed with a bad 350. Lately im wonderin how much $$$ it would be to swap a 454 or rebuild the 350.
i had $1000 in doing mine
SwS Crash iv found a nice 98 k2500 with a 454 vortec. Have to do some work to it but whole truck for $1500. Think im goin to do a double swap, diesel the 3/4ton and 454 the k10.
@@Ulfstigandr Kool
For a 454 swap it's just the price of the 454. Everything bolts up minus exhaust. A bit late to the party but now you know.
Note from an auto tech. When your engine is that cold, especially 9 degrees. Never rev your engine past 3k rpms until it has reached full operating temperature. Remember metal expands and the inside of the block can expand faster than the outside. You can potentially cause alot of problems.
im a full time auto mechanic and i built that engine from the ground up and ik what it can take and cant plus i had it plugged in over night witha a block warmer on it and a heater that goes on the bottom rad hose
Awesome trucks and judging by this video you live in New York
nope pa
Did the 87 k10 come with the 454?
No it didn't. A good friy of mine was working on getting the truck put together. But unfortunately he unexpectedly passed away in a motorcycle accident. So I had bout it off his wife and finished the truck with the 454 and 3/4 ton running gears and since this video a five speed was added to it and a cam and headers then I sold it to another good friend of mine where he's doing a complete frame off resto on it currently
My 1076 chev is hard to start every morning. After it starts it fires up right away. It's like it loses gas in the carb after it sets overnight. Need help
Wayne Davis on my truck the engine is out of a 93 one ton so it don't have a place in the block for the mechanical fuel pump so I put a electronic fuel pump back at the tank and the carb I have on this truck is only a year old 750 Edelbrock
pump the gas a few times before starting to force gas into the carb
might have a leak in the fuel line. small pin hole. mine took forever to start as well everytime it sat, found a small slit on the fuel hose that didnt cause a leak but caused fuel to drain back to the tank and also caused the issue like sucking through a straw with a hole in it...
Wayne Davis The problem is a likely the float bowl needle valve seats are worn.
Causing the fuel normally stored in the carb bowl to leaked back down into the line and tank overnight
When you shut it off, pump the gas after. Bingo presto in the morning every time. Try and lmk.
chokes are there for a purpose
You can have the cold.
KING POSH GAMING I can send it down to u man
DID YOU SAY 9 DEGREES OHH NAH!!
oh yeah its 9 degrees its flipping cold out and with the wind chill its even colder...
SwS Crash you have fun with that lol I'm a summer baby
Almightycaesar1 I don't blame u I like the snow just not the cold
SwS Crash I would have all the heat on all day
Almightycaesar1 for sure on that one
9 degrees..thats like -13 C up here in north of Scandinaivia, a mild winter .
That 454 need alot of TLC if its that hard to start in a normal winters day.
I freshened it up and turned around and sold it. About a year ago
you just liked my comment and don’t answer “where is it located”....((
slippery rock pa
That’s a real mans truck... cough cough.. “ford is for fairy’s”