Very impressive build. The drywall mud made an easily shapeable base which worked great because you were only making the buck from which the boat parts got molded. Working smarter, not harder.
Yeah u def want to mask up for this maybe not other things but sanding that? Look at ur csr hood it is fine particulate and floats into and on everything. Other than that which is your choice by all means, looks like a cool build
Looks great, but the motor should have been mounted slightly lower. You’re losing a lot of power because the prop sticks slightly above the water it looks like. What a cool boat!
When he shows it in the garage it actually looks a little too low. Could be the camera angle but either way you loose significant power from being too high or too low. Still a stellar build!!
@@custombuildsonly3909I had a similar boat with a 30hp motor It was very fast and stable in pretty rough water …. Until I slowed or stopped! The weight height of the motor made it scarily unstable unless powered on!
А в чём смысл таких обводов? На глиссер лодку не вывести, идёт в водоизмещающем режиме, соответственно не поураганить. Подругу не покатать - места нет. Работа ради работы (видео)?
Verry Impressive my Man You Put a lot of Work Into it , One Thing Tho Ive Always thought of Putting a Jet Ski motor and jet Unit , in a Little boat like that Mabye Next time try that Direction Well Done
@@custombuildsonly3909 a 6hp motor would be enough for sure. I run a 6hp on my inflatable boat. alone i reach 25km/h easily. if it was on your kayak 30km/h for sure
Great job bro super cool! Do you know what kind of kayak you started with? Like the brand or company name? Dimensions maybe? I've been looking for something similar to do the exact same thing! A sit in motor kayak with steering wheel. Hope to do as good a job as you did
@@sudamericanrockers6616 thank you 🙂 it still is a motorized kayak and with a proper hull. The dimensions are not of a boat it's too slim for it's length to not be called a kayak
I am trying to use fiberglass over foam but i hadn't much success the fiberglass melted the foam. it destroy the boat I was building out of foam. what did you spray over the gyps coating do it protect the foam from the resin ?? What do you suggest to put on the foam if i want to fibreglass it
Hmmm for sure it will melt it. You could use epoxy resin that is used for carbon fiber, that doesn't melt it. But what I did was spray the gyps coating with primer paint that is used for cars and some hardmetal filler spray. Or else you could cover it with some layers of tape
Very cool boat, and looks like so much fun to drive! Love the color scheme too, thanks for the great video!
You should be selling skins made from the mold for other enthusiasts to build on, and even completed versions - looks great man
@@sixxgunz3774 yeah the only problem is time haha cause I'm always doing a different project😅
I’m very impressed with your work.
I’ve fiberglassed the interior of 4 boats and really enjoyed seeing your creativity in mold making. New to me 🤔🤔🤔
Great work guy, but do yourself a favor and wear a mask.......you will live longer.
Very impressive build. The drywall mud made an easily shapeable base which worked great because you were only making the buck from which the boat parts got molded. Working smarter, not harder.
All that dust no mask...come on dude think of your lungs your health
True true but I do wear a mask when cutting fiberglass
Some people like dust, give him a break
I feel like you need to re-power that hot rod
Nobody gets out of here alive
Loved the build & the video! Great application for electric too.
Absolutely great job I appreciate your work.
Yeah u def want to mask up for this maybe not other things but sanding that? Look at ur csr hood it is fine particulate and floats into and on everything. Other than that which is your choice by all means, looks like a cool build
Oh yeah! A Lake Merc Cruiser. I got a old wave runner that would make a awesome jet drive project for something like this.
Oh man. Just into this and I thought you was wack with a 500lb kayak of bondo.. then you popped the skin off and blew my mind! F yeah your the dude.
Came out great, enjoy!
This dude has building knowledge,quite interesting!
Looks great, but the motor should have been mounted slightly lower. You’re losing a lot of power because the prop sticks slightly above the water it looks like. What a cool boat!
When he shows it in the garage it actually looks a little too low. Could be the camera angle but either way you loose significant power from being too high or too low. Still a stellar build!!
@@OptimusMatrix no it's perfect cause I tested it at different hight adjustments. It looks high cause the kayak has a shallow stern.
@@custombuildsonly3909I had a similar boat with a 30hp motor
It was very fast and stable in pretty rough water …. Until I slowed or stopped!
The weight height of the motor made it scarily unstable unless powered on!
My first car was a Mini panel van, 74, $400 Australian dollars, Great Great car.
Amazing content awesome work and music very talented 🎉🎉
Except it's a boat not a kayak
Very nice build 😊😊😊greetings from Germany
Bravo très Bon travail 👏👏🤝
А в чём смысл таких обводов? На глиссер лодку не вывести, идёт в водоизмещающем режиме, соответственно не поураганить. Подругу не покатать - места нет. Работа ради работы (видео)?
this was sick! great job!
It would have been nice if you made a step by step instructional video for learning purposes. Nice build
This thing is pretty damn cool! I want one!
Он запускал мотор без воды и газовал ещё?😂😂😂😂
No no man it was in a bucket of water it doesn't show in the video you think I'm crazy hahaha 😂
@@custombuildsonly3909Никакого ведра нигде не видно. А ещё не видно контрольной струи воды , которая должна была литься на пол.
That Kayak got Pimped! #CoolBuild
Just hold ur breath when grinding and sanding and take a breath when u stop. Same as with welding Just use the good old safety squint! ;)
@@michielpoortvliet3003 exactly hahaha old school techniques 😏
Great job making that boat, but its way to small. Only made for one.
Travail d'orfèvrerie bravo en tous et fière jolie je pense tableau ar renforcer bracon de soutient un petit Mercury 400xr❤ 😅 béllissimo
Verry Impressive my Man You Put a lot of Work Into it , One Thing Tho Ive Always thought of Putting a Jet Ski motor and jet Unit , in a Little boat like that
Mabye Next time try that Direction
Well Done
Yepp that's what I intend to do in the future is to remove the outboard and fit a jet drive. Thank you for the comment much appreciated 😊
Ficou top, estou fazendo meu também mais acabou o dinheiro 😅
Always wanted to do this but for a sea kayak
Great job, now lets get a bigger motor LOL !
@@masonryjoe yeah haha a jet drive with a jet ski engine to lower the centre of gravity and for power obviously😁😁
@@custombuildsonly3909 That would be sweet !
@@custombuildsonly3909 a 6hp motor would be enough for sure.
I run a 6hp on my inflatable boat. alone i reach 25km/h easily. if it was on your kayak 30km/h for sure
Top
Awesome, I want one.
Very nice job.
Hope you kept the mold dude you could resale the shell over and over
@@troycyr1892 yepp for sure
👍👏
Parabéns 🎉🎉🎉 Congratulations 🎉🎉🎉🎉
Next step: Room service
Your ancestors would be proud.
Cool AF!! 👍👍
Nice build
Super, bravo
Good for you lad have a blast
Bon délire !
Great Work but it is No kayak anymore, it's a boat 😁
A kayak is a boat.
That was never a kayak to start with
Great job bro super cool! Do you know what kind of kayak you started with? Like the brand or company name? Dimensions maybe? I've been looking for something similar to do the exact same thing! A sit in motor kayak with steering wheel. Hope to do as good a job as you did
@@HHC808 it's an old company from the 80 in Malta that used to do the kayak I used for the base
That thing is perfect
excellent Boat Sir and video
Looks like shes ready for a 25hp Mercury!😂
@@High-Alpha hahah it would sink for sure. A jet drive with an inboard engine is the way to go maybe next year
Нужно было 2х цилиндровый водомёт поставить или мото весло
how cool is that!
whats name of this song buddy its pretty catchy nice project by the way love your construction
@@fabianbird4584 waiting for the summer, in the end and left hand free I think they are in the video description. Thank you btw much appreciated 😊
Nice small BOAT... Not a Kayak though
@@sudamericanrockers6616 thank you 🙂 it still is a motorized kayak and with a proper hull. The dimensions are not of a boat it's too slim for it's length to not be called a kayak
nice build, the music is wack though
Needs a 25 horse
It needs at least a 25 hp to make it faster and fun! It’s to slow!
@@jimmycline4778 yep I'll fit a jet ski engine and jet drive in the future for sure but for now it's ok as is. It reaches 13.5knots so not that bad
Big Man looks like Factory product
🔥👍👍👍
As soon as you put any kind of motor on a kayak, canoe, or rowboat, you'll need a licence, even if it's a wind up elastic motor !
@@Incognito-fe8cw not in Malta brother, from 30hp up you need a license.
Def need a 8hp or 15
Australia Weekend Pert look Cafe Music 😅😊
good job
Hmmm...
Needs more cowbell
Godjob
Big question don’t kayaks flip … the guy put a motor on a flippable kayak ?
@@danielwadding8642 yepp I flipped with it once hahaha that's why I need to put an inboard motor so to lower the centre of gravity significantly.
i reat job!!!! can you tell me what materials you used in video
Thank you for your comment 🙂 yes I used gyps coating to form the shape of the model and then fiberglass
What would you do if you take up water?
Swim
@@bilalmeziane yepp hahah swim. It won't sink cause I filled it with pockets of expanding foam and the back is all sealed storage
He used the kayak as a mold.
It is the stone
that thing is awesome!!!! but for god's sake man wear a respirator or a good mask when you sand fiber glass
I am trying to use fiberglass over foam but i hadn't much success the fiberglass melted the foam. it destroy the boat I was building out of foam. what did you spray over the gyps coating do it protect the foam from the resin ?? What do you suggest to put on the foam if i want to fibreglass it
Hmmm for sure it will melt it. You could use epoxy resin that is used for carbon fiber, that doesn't melt it. But what I did was spray the gyps coating with primer paint that is used for cars and some hardmetal filler spray. Or else you could cover it with some layers of tape
polyester resin melts foam. have to use epoxy resin. i've used MAS epoxy with fast hardener for years with good results.
You can use PVA glue on top of the foam, that will isolate the foam from polyester.
take my money
...lassu.😂
i see its a car body shop but same question
cool i pute float pods on mine so i dont get swamped when im starting the motor dead in the water
😊😊😊😊😊😊😊😊😊
epoxy gelcoat vs acrilic?
Nah, only the windscreen is acrylic from the whole build
how many HP in the engine and what kind of plaster you used?
The motor is a 4hp mercury and I used "Crown" gel coats for both the mold and the finished kayak.
@@custombuildsonly3909 you did a awsome job congratulations!!!
All that to go 8 mph?
no, all that for a feeling of accomplishment and stepping back and looking at it and saying to yourself, "I built that with my own hands"
I get that but creating something useless is not a accomplishment it's a waist of time
25km/h till now, in the future you wait and see
@@AlexBerezovskyJr yeah, thank you for the comment bro much appreciated
@@M-mj8bd jealous that you don't know how to make one😂😂😂😛
LFG!
#trendingnow
I would watch the video but decided not to because music.
Turn sound down and watch .
To all the people who say put a 25 hp motor that is way to much it would be better up to 10hp
@@Goober481 and that would also be too much cause of the weight and engine placement. Best is to put an inboard with a jet drive
Stick a 50cc on there 😅
Hilarious comment when he already have a 102cc on is boat …. When you dont know what you are talking about…
@mozzyviator2939 I mean 50hp sorry my bad.
What music?
Nothing about that vessel is a kayak.
why did you ad to the hull and make it heavy?
@@tucanman9775 cause it wasn't lifting the back end to get on plane so I added does fins
A motorized kayak? You mean a small boat?😂
mag ik u vergunning even zien??
I've got everything registered my friend haha
@@custombuildsonly3909 oke very good
Шляпа
Ну и дерьмо столько времени убито
Kinda slow
@@lonewolfwildernesssurvival9443 yepp it only reaches 25km/h maybe in the future I'll fit a jet drive