Mr. Ho, you are an unbelievably skilled thinker and fabricator. To know as many fabrication disciplines as you do is a true blessing. You molded glass mat, modified the jet drive to fit, welding, etc. It seems that there is nothing that you cannot do! Awesome build of this little jet boat!
Unless you are a fabricator or work with your hands you cannot fathom to appreciate the skills this guy has and in addition the minimal amount of tools he uses in relation to this project
I don't comment much on videos but I have to say something. Sir, you are one heck of an engineer. It's truly unique the ideas you come up with and how you make those ideas come to life. You use the tools and materials that you have available to make incredible masterpieces. Keep up the amazing work. I am a subscriber for life.
That's some straight up next level custom fabrication..Built better than the boats in the water today .1200cc engine .153 mm jetpump..trim..Ride plate..mikuni super 44 carbs..Love it!!!
Mr Hò you always do a awesome job of building these craft! I doubted you when you first took it out and it was obvious that the trim of the boat was off! But you sorted it out immediately!! By putting on a flow reducer to maximise the thrust efficiency!! Yet another awesome video my friend! God bless you ❤❤❤
Beautiful work sir awesome very nice. My son-in-law used to have a Waverunner that had 350 horsepower that engine in yours would go like heck it would go 80 miles an hour in a Waverunner can you imagine what would go with your boat awesome nice work sir God bless good luck from USA😊
Absolutely incredible !!! Very simple operatives......... clever hull construction......... and a motor that provides a very quick turn of speed. Love the Mikuni 44s.
I am 66. Built many high performance cars. You Sir, are amazing. You exhibit the essence of hotrodding. Very impressive design, and build. I hope you are very successful! Outstanding!
Xem bạn chế từ mấy năm nay rồi cái nào cũng đỉnh của chóp🥰 bạn ko chỉ giỏi về các nguyên lý của từng sản phẩm mà còn rất giỏi về cơ khí chế tạo nữa🥰 video của bạn rất đặc biệt
If this is only a hobby, he is wasting his skills, he built a 13,000 dollar boat, he could sell it for 20,000 or 30,000., he is clearly a professional.
I love watching your builds but please please wear a respirator when you’re cutting fiberglass! You work with it a lot and I don’t want you to get sick from it :( Best wishes!
i'VE WATCHED SEVERAL OF YOUR VIDEOS AND THEY KEEP GETTING BETTER AND BETTER....I'm honestly surprised a company hasn't asked you to develop a new boat design....but you know what if I was you get someone to financially back you open your own company and sell a really cool looking boat or trail bike....Your designs would sell on the global market...
im a fabricator designer I love this channel because he can create things on the fly without a bunch of drama it's just common sense building and it always turns out great I have learned some valuable ideas from him and I especially like the boats which is led me to designing my own catamaran boats. keep up the good work it's always fun to watch this channel
my new favorite build from your hands, this is one of the most amazingly well done hand built boats ive seen come out of a back yard in a very long time, like 25 years or so, favorited the video so i can go back in the future an try to build the same boat for myself just a meter longer as im 6.10 ft tall, awesome power coming from that engine an what a sound it has
Truly incredible. The only thing i have concern about are the motor mounts only into the fiberglass. Seems like a more structural support is needed for longevity. A metal plate maybe? Also a metal plate on the transom to help take and spread some impact stress load incase you hit something with the jet.
Nice boat Mr Ho. My first time watching your channel - and now a subscriber. Excellent job on the build , truly a man of many talents Keep safe on the water , maybe ware a life-jacket .. oh, and add a bulk head ( air tight ,) with some expanding foam incase you strike a rock or something - Well done again Mr Ho .... I'm off to watch some more of your videos... ☘️
I would say now that you have the metal mold for the fibreglass body you can turn this into a business! Bet there are loads of people out there looking for a boat like this
I'm just gunna put it out there mechanically inclined isn't he word for this this is some of the best videos on CZcams asmr type stuff but that's just a piece you and the other people that do these videos like this is super impressive ik your not the only one I'm really complementing all the fellas and women that do this knowing even us Americans or whoever can't understand the language or read the comments sometimes but yet we can understand what goes on by actions to whom it may concern please continue these types of videos I also feel yall creators are not getting the credit yall deserve I appreciate these for sure thank yall
Mr Hồ, Một công trình tuyệt vời khác của bạn. Sở trường xây dựng đơn giản của bạn luôn làm tôi ngạc nhiên. Hãy tiếp tục tạo video của bạn, tất cả chúng ta đều thích chúng.
Yes, the engine is really being held back by lack of proper scavenging. That said, The design and build is great, adding another 30-40% to the top end might be a wild ride. Love Mr. Ho's work. Proof it's not the cost of the tools, but the knowledge of the guy running them that makes the difference.
Sir you are a true craftsman, watch start to finish. Simply amazing wonder what you could achieve if you had a whole fabrication/ machine shop with all the advanced tools. For your next project build a one person plane.
Why do so many of you commend these builders for their skills, when their doing things either improperly or the hard way? There were several steps they did which were unnecessary. Some were done late or at the incorrect time. Some other details were done completely incorrect. While others just seamed like they hadn't thought out the process. If your intent is to just say, "Wow, that's a cool boat", then I agree. They have plenty of drive and I suspect they'd be open to learning more efficient and effective ways to go about their trade. Their actual practice and implementation of said skills, however, is not impressive.
@@bensprink9943 First of all, Vietnam is not a third world country. That's not an excuse when you do steps out of order. It's not an excuse to smash an oil seal or bearing into place, either. It was obvious that a lathe was available, but wasn't used for several steps. The propshaft is not straight, but could've been. I could go on and none of it is excused by your comment.
Luar biasa kreatif sekali kawan,, saya sangat suka dengan skill dan ketrampilan yang teman punya,,, sukses selalu kawan,,, salam kenal dari Indonesia🇮🇩🇮🇩❤❤❤
This looks and sounds very good! Excellent work! Are you going to add tuned exhaust at some time in the future? You are leaving a lot of power on the table with straight pipes.
Your channel is the best source of inspiration for me in making mini boats. I really like it, I'm always waiting for your new video, I hope one day I can see your creativity in Vietnam. 🤩😍
I enjoy watching your videos. I'm just concerned about some of the stress areas, where the mounts are attacked directly to the Fibreglass. Other than that. It's nice.
o seu trabalho é muito limpo (sem gambiarra), é impressionante, companheiro! O tremendo trabalho que você fez ao criar o molde do casco do barco é muito professional e de bom gosto o desenho que escolheu e, volto a dizer, muito limpo (sem improviso), me impressionou muito... não todo mundo tem essa atenção que você tem... Toda a parte mecânica posta de forma limpa e excelente o desempenho do barco!
Très impressionnant, du point de vue mécanique, conception de coque, techniques employées et avec beaucoup de récupération. Les grands bureau d'étude ne feront jamais mieux, car vous mettez au point en direct, et vous maîtrisez toutes les étapes.
Dude ive watched a few of your builds and you impress the sht out of me. Never have i seen such i dont even know the words. Like a mad scientist. Very kool. Cant wait to see whats next and awsome job on showing us the steps you take. Very kool
Mr. Ho, you are an unbelievably skilled thinker and fabricator. To know as many fabrication disciplines as you do is a true blessing. You molded glass mat, modified the jet drive to fit, welding, etc. It seems that there is nothing that you cannot do! Awesome build of this little jet boat!
Jf
Очень долго не было Вашего видео 😱. Ещё раз скажу, Вы гений. Очень интересно смотреть Ваши работы. Однозначно супер 👍👍👍
Well, not a genius, just a bored man with a lot of money
Unless you are a fabricator or work with your hands you cannot fathom to appreciate the skills this guy has and in addition the minimal amount of tools he uses in relation to this project
This is impressive to say the least! Sounds like a absolute beast!
I built boats for 20yrs still to this day we use fuck all tools a grinder, sandpaper, orbit sander, drill and thats about it.
@damianmurray1792 hats off to u man! That's freekin awesome! Very cool skill/ knowledge to have..
This guy is a mechanical genius.
Minimal? Drill press, lathe, arc welder, plasma cutter …
Glad to see you are still at it Mr Ho! You will always be one of my hero’s. Another great job Sir!
One of the best youtubers around, Mr Ho never ceases to amaze !!! Can't wait for the next video, more please ;-)
Recently bought my self a medium mini speed boat and watching this is just fascinating, beautiful work
I don't comment much on videos but I have to say something. Sir, you are one heck of an engineer. It's truly unique the ideas you come up with and how you make those ideas come to life. You use the tools and materials that you have available to make incredible masterpieces. Keep up the amazing work. I am a subscriber for life.
That's all you do is comment
😊
Good! Hi
That's some straight up next level custom fabrication..Built better than the boats in the water today .1200cc engine .153 mm jetpump..trim..Ride plate..mikuni super 44 carbs..Love it!!!
You should make the seating how they sit in f1 cars then produce a bunch of them and sponsors a race, it might catch the right eyes
U know ur thing
You just became my first non-English speaking channel subscription! Great work!
Can you imagine how much stronger it would run with proper expansion chambers?
It would be sick. Good job my man .
Or if he port matched that exhaust, Jesus Christ that was rough
@@BikingVikingHH yes and pipes it would scream, I dedicated 17yrs to the high performance 2 stroke industry and enjoyed every day of it.
Việt Nam rất tự hào vì có một người tài giói sáng chế như bác
Amazing project and skill. You are very talented and your video build was excellent. Great job and thanks for sharing.
Mr Hò you always do a awesome job of building these craft! I doubted you when you first took it out and it was obvious that the trim of the boat was off! But you sorted it out immediately!! By putting on a flow reducer to maximise the thrust efficiency!!
Yet another awesome video my friend!
God bless you ❤❤❤
That's pretty cool Mr Ho. The smile on your face after the last run, says it all 👍😊
บารมีที่ขลบ9
Beautiful work sir awesome very nice. My son-in-law used to have a Waverunner that had 350 horsepower that engine in yours would go like heck it would go 80 miles an hour in a Waverunner can you imagine what would go with your boat awesome nice work sir God bless good luck from USA😊
Absolutely incredible !!! Very simple operatives......... clever hull construction......... and a motor that provides a very quick turn of speed. Love the Mikuni 44s.
I am 66. Built many high performance cars. You Sir, are amazing. You exhibit the essence of hotrodding. Very impressive design, and build. I hope you are very successful! Outstanding!
Did you see how he molded the hull? Impressive.
Xem bạn chế từ mấy năm nay rồi cái nào cũng đỉnh của chóp🥰 bạn ko chỉ giỏi về các nguyên lý của từng sản phẩm mà còn rất giỏi về cơ khí chế tạo nữa🥰 video của bạn rất đặc biệt
Rryryrrrryitryrrgfuuy
How much to buy one ???
❤😮
😮❤
You know your good when you make that all look so easy
All this work with a welder, handtools and a metal lathe.
That is absolutely awesome. If I had the money I would fund you to build custom mini boats like that.
My friend you are definitely blessed.
Очень интересно получилось! Классно, без лишних слов, всё по делу! Удачи и процветания вам в вашем хобби!
If this is only a hobby, he is wasting his skills, he built a 13,000 dollar boat, he could sell it for 20,000 or 30,000., he is clearly a professional.
I love watching your builds but please please wear a respirator when you’re cutting fiberglass! You work with it a lot and I don’t want you to get sick from it :(
Best wishes!
Came here to say the same thing!
i'VE WATCHED SEVERAL OF YOUR VIDEOS AND THEY KEEP GETTING BETTER AND BETTER....I'm honestly surprised a company hasn't asked you to develop a new boat design....but you know what if I was you get someone to financially back you open your own company and sell a really cool looking boat or trail bike....Your designs would sell on the global market...
U did what us regular people wish we could! Good for u brother!
These builds never get old
Always impressive to see the little speed monsters you craft!
Looks to be very fast , at least 70!to 75 mph !!!
So awesome this bad ass powerboat
You guys are the best builders
This guy should have aleast 1Million subscribers by now.
Awesome work 👍👍
im a fabricator designer I love this channel because he can create things on the fly without a bunch of drama it's just common sense building and it always turns out great I have learned some valuable ideas from him and I especially like the boats which is led me to designing my own catamaran boats. keep up the good work it's always fun to watch this channel
Kinda nice when they just build and don't have to talk about losing the shop every five minutes
Sometimes to make things perfectly we take a hassle when we can make things easier.
That's what because they make things for business an justify the price with the effort,but when it's a personal project,it can be done simpler.
He's got pretty well calibrated eyeballs
saya dari indonesia sangat suka konten ini , boleh saya bertanya itu memakai mesin bekas apa ya tuan Ho 🙏
my new favorite build from your hands, this is one of the most amazingly well done hand built boats ive seen come out of a back yard in a very long time, like 25 years or so,
favorited the video so i can go back in the future an try to build the same boat for myself just a meter longer as im 6.10 ft tall, awesome power coming from that engine an what a sound it has
That’s amazing, I want to buy one, how much?
Hi Mr Ho! I'm new fan from Spain.
Just want to say that your work is awesome!!! 👏🏻👏🏻👏🏻
We are waiting for the next surprise
Truly incredible. The only thing i have concern about are the motor mounts only into the fiberglass. Seems like a more structural support is needed for longevity. A metal plate maybe? Also a metal plate on the transom to help take and spread some impact stress load incase you hit something with the jet.
My thoughts are to have wood stringers for rigidity and also to bolt the motor mounts to
J'attends toujours avec impatience les nouvelles vidéos ! Beau travail (comme d'habitude)! Merci beaucoup ! 🤗 👏👏👏
Can I tell you how awesome your work is when I clearly have not finished the video?
Mr Ho, you sir are truely talented man! Thanks for sharing and bringing a smile to my day!
Nice boat Mr Ho.
My first time watching your channel - and now a subscriber.
Excellent job on the build , truly a man of many talents
Keep safe on the water , maybe ware a life-jacket .. oh, and add a bulk head ( air tight ,) with some expanding foam incase you strike a rock or something -
Well done again Mr Ho .... I'm off to watch some more of your videos...
☘️
I don't know when I first realized that you guys totally knew what you were doing! I'm enjoying this the boat really looks great!
I would say now that you have the metal mold for the fibreglass body you can turn this into a business! Bet there are loads of people out there looking for a boat like this
I'm just gunna put it out there mechanically inclined isn't he word for this this is some of the best videos on CZcams asmr type stuff but that's just a piece you and the other people that do these videos like this is super impressive ik your not the only one I'm really complementing all the fellas and women that do this knowing even us Americans or whoever can't understand the language or read the comments sometimes but yet we can understand what goes on by actions to whom it may concern please continue these types of videos I also feel yall creators are not getting the credit yall deserve I appreciate these for sure thank yall
Quá tải giỏi 👍👍👍⭐️⭐️⭐️. Con làm đi xuất khẩu qua Campuchia và thái lan. Là con giàu!!!
Chúc mừng con ❤❤❤
This guy is second to none. Brilliant in everything he does. First class work.
Mr Hồ, Một công trình tuyệt vời khác của bạn. Sở trường xây dựng đơn giản của bạn luôn làm tôi ngạc nhiên. Hãy tiếp tục tạo video của bạn, tất cả chúng ta đều thích chúng.
How long did it take to type all those little symbols in your comment, respect
😊
@@beemerkon there are non english keyboards
@@GhulamAli-kj3tx 4
please ty❤đ
Just EPIC . You're a professional car , boat , bike or whatever you get your hands on . 💯❤️👍🙌
Great job. I'd like to see expansion chambers on each cylinder for your exhaust. You'd get crazy mid and top end pull. 28:34
Yes, the engine is really being held back by lack of proper scavenging. That said, The design and build is great, adding another 30-40% to the top end might be a wild ride. Love Mr. Ho's work. Proof it's not the cost of the tools, but the knowledge of the guy running them that makes the difference.
You are certainly a fabrication and mechanical genius as well as a highly skilled and knowledgeable Craftsman! Brilliant!
Mr. Ho, Bạn thật tài giỏi, ai rủng rỉnh tiền thì mua thuyền chứ ra ngoài tự đóng một chiếc mà không biết hướng dẫn thì sao? Tuyệt vời
Chất luôn! Việt Nam vẫn có những người nông dân giỏi
Man that looks fun!! Great build!!
Amazing build. Only comment I have is I would have laid up several more layers of fiberglass and put in some additional wood in key stress areas
Stringers
@@LifenSantaBarbara Yup
Отлично ! Mr Ho, нужно осваивать технологию подводных крыльев. Это следующая ступень.
Уважаемый, Вы сами до какой ступени дошли?
Sir you are a true craftsman, watch start to finish. Simply amazing wonder what you could achieve if you had a whole fabrication/ machine shop with all the advanced tools. For your next project build a one person plane.
Nada mejor que el propio ingeniero constructor pruebe la maquina tal como la imaginó cuando vio las piezas sin armar. Felicidades Mr Ho desde México.
Viet Nam not Mexico.
Kiero una lancha igual como la consigo?.
Классная работа, Поздравляю, Молодец! 👍🏻😊
I was missing you Mr Ho! Excellent build, congratulations!
У меня нет слов , это просто фантастика ,у тебя золотые руки!!!
Amazing I enjoy watching people build something from many different parts.
A beautful craft, awesome work as always!
I'm always impressed by the innovation in these tiny homemade boats
#were3eeeeeeeeeeeeeeeeeeeeeeeeeeeee333eeeee33eeeeeeeeee3😊¢333³🎉were3e3
yygyyy
Why do so many of you commend these builders for their skills, when their doing things either improperly or the hard way? There were several steps they did which were unnecessary. Some were done late or at the incorrect time. Some other details were done completely incorrect. While others just seamed like they hadn't thought out the process.
If your intent is to just say, "Wow, that's a cool boat", then I agree. They have plenty of drive and I suspect they'd be open to learning more efficient and effective ways to go about their trade. Their actual practice and implementation of said skills, however, is not impressive.
@@tomb816 because it's a third world country and they make due with what they have.
@@bensprink9943 First of all, Vietnam is not a third world country. That's not an excuse when you do steps out of order. It's not an excuse to smash an oil seal or bearing into place, either. It was obvious that a lathe was available, but wasn't used for several steps. The propshaft is not straight, but could've been. I could go on and none of it is excused by your comment.
I absolutely love this design, reminds me very much of the aesthetic of a Homeworld ship :D
I’m 😊so 😊😊
😊😊😊😊😊😊😊😊p😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊
I’m 😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊
W O W!!!! That is Awesome! That looks like it is seriously fun and seriously fast! Well done Sir, Well Done!
He’s back! You make it all look so easy. Super inspiring stuff. Gotta turbocharge one of these engines!
Love it brother I always look forward to your project. Keep it 👍
Happy to see that you have a great team too .. congratulations all 👏🏻
Its always fun watching him work with the fiberglass and finishing since its the stuff i do at work.
Awesome build! Expansion chamber on your exhaust would give you 2X the power! You're slowing yourself down for no reason
I was wondering too why he made it with sraight pipes!😮awesome build anyway.
Kênh như này lẽ ra phải được vinh danh lên đài truyền hình quốc gia 🇻🇳👍
Luar biasa kreatif sekali kawan,, saya sangat suka dengan skill dan ketrampilan yang teman punya,,, sukses selalu kawan,,, salam kenal dari Indonesia🇮🇩🇮🇩❤❤❤
This looks and sounds very good! Excellent work! Are you going to add tuned exhaust at some time in the future? You are leaving a lot of power on the table with straight pipes.
Wow, very powerful for such a small boat! Nice design and construction! You are a good engineer and fabricator!
Нереально крутое видео! Светлая голова и золотые руки! 👍
Far out, round 2 made a huge difference!! Nice job guys!!
You have earned all my respect and admiration for such remarkable skill. Congratulations, you are a true artist! 🌟
🇧🇷🇧🇷🇧🇷🇧🇷
Anh mải là đỉnh cao vược ngoài mong đợi ❤
wow! As a tool maker, I am super impressed! Skills 100%
That jump out of the water launch is amazing!! Well done sir!!!
Обалденный вариант, молодчага🤝🤝🤝 так держать себя всегда✌✌✌✌✌
Your channel is the best source of inspiration for me in making mini boats. I really like it, I'm always waiting for your new video, I hope one day I can see your creativity in Vietnam. 🤩😍
Mr. Ho is so cool!!! Wish my parents were like that!😃
Крутой мастер!
Лодка ***БОМБА***!😊🎉🎉🎉
You are amazingly skilled in every way ! Awesome work. Please keep on going !!!
As always Mr. Ho another great video you are a gifted person. Keep it up and God bless.
Excellent fabrication and design skills, Mr. Hô! That engine in the boat RIPS!
Quero uma dessa aqui no ria Amazonas! Moro aqui e essa é um sonho nesse grande Rio!!
Your boats are getting more and more professional looking every time! That boat is very quick!!!
Kênh càng ngày càng làm giỏi !
Đồ làm vỏ ca nô đã có khuôn Composit khá chuyên nghiệp !
I enjoy watching your videos. I'm just concerned about some of the stress areas, where the mounts are attacked directly to the Fibreglass. Other than that. It's nice.
Wood stringers should be incorporated into the build
That boat rips! Congrats on the build, she's marvelous!
I would captain that over a jetski any day....Awesome build...✌️😎
Гениально 👍🎈руки растут из правильного места😊
Em là Phan cứng của anh nhiều năm nay video nào anh ra là em coi hết 😊 chúc anh trai càng ngày càng thành công trong tương lai 🎉❤
Proud of your hard work. Please keep inventing, hope your kids learn from your hard work.
o seu trabalho é muito limpo (sem gambiarra), é impressionante, companheiro! O tremendo trabalho que você fez ao criar o molde do casco do barco é muito professional e de bom gosto o desenho que escolheu e, volto a dizer, muito limpo (sem improviso), me impressionou muito... não todo mundo tem essa atenção que você tem... Toda a parte mecânica posta de forma limpa e excelente o desempenho do barco!
Классный аппарат получился!👍🏻
Excellent job Mr. Ho, you are a truly fine craftsman!
Man this is awesome! I've always wanted to build a mini boat like this
Great boat Mr Ho
Would like to see a video of how you made your dock, or Jetty. That looks great
Super nice, I think you could sell these as fast as you can build them Great job
Très impressionnant, du point de vue mécanique, conception de coque, techniques employées et avec beaucoup de récupération. Les grands bureau d'étude ne feront jamais mieux, car vous mettez au point en direct, et vous maîtrisez toutes les étapes.
Damn man, I'm impressed as hell. You have some very high level skills. What a great little boat.
Dude ive watched a few of your builds and you impress the sht out of me. Never have i seen such i dont even know the words. Like a mad scientist. Very kool. Cant wait to see whats next and awsome job on showing us the steps you take. Very kool