The Start of Serious Rot Fixing on my 1980's 30ft Catamaran
Vložit
- čas přidán 16. 04. 2024
- This video shows how to fix a plywood boat. More accurately it shows how I started to fix some of the rot on my plywood catamaran. I cut out the rot and replaced it with new wood, watch the video to find out how!
I always use the piece I cut out as a template instead of using the paper or cardboard love your videos should be longer
totally safe, as long as it never leaves the backyard.
Im subscribing after seeing your first video and now this. I think you have it in you to get it right
I suggest you paint the joints with unthickened epoxy before you put the glue on. Stops the ply soaking up the epoxy and leaving a dry joint.
Damn good advice mate! Hope he listened
Agreed
So good seeing someone have a go at living their boat dream. Thanks for sharing.
I believe you are supposed to coat your plywood with resin before you do any joinery. It keeps the dry plywood from absorbing the resin used to join pieces. Which will weaken the Joint.
Dude! I wasn’t sure I’d ever see you start the project…thought something happened after the first and second video…missing in action for a while…super super stoked for you now though. Yeah bud. Hell yeah. Get after it! Don’t forget how some good music while you work totally changes the vibe and increases productivity by at least 317%.
Good luck! Subscribed. Can't wait for the next episode
I'm gonna check back with you in 2030
I agree just found this channel. This guy is screwed. Not a good project
Cut your paper shape first and then draw it the boat side, it's easier than cutting out and then tracing the cut. Also use a spatular instead of a brush when applying the thickened epoxy as it will go on better, be snoother and fill any low areas.
You got your groove back 😂
I'm looking forward to seeing more work on your project.
Am not an expert but have done some building with marine ply/epoxy. Using backing plates/doublers/internal framing where the repairs are joined seems like a wise thing to do. Also, I hope you consider a thicker glass lamination schedule compared to the original construction. If your budget allows, maybe some carbon fiber in the outer hull lamination to reduce weight.
Good stuff
I would have done the stringers first as that will be much easier, and more support .Also consider smaller screws, those were overkill, and as has been said prime the glue areas with straight epoxy just before you glue up.
It will stop the timber sucking the glue epoxy in causing a dry joint
Talent is something. Persistence is everything.
You will succeed.
I like yours boat proyect Bro 😀👍😉⛵
Let’s go! I subscribed.
👍
I must subscribe, have to see this build all the way through.
You youngsters!!
This is an exciting project, keep up the good work, thanks for posting.
Tip, I get 3 or 4 goes out of a paintbrush. Wipe well, then clean with alcohol.
Alcohol good for cleaning everything, fingers included. (Acetone is not good for you)
Your stepped joint is a good idea, but not as strong as a scarf. If backed up with lots of grp both sides ok.
Did you consider using backing plates, with a plain butt joint. Lightly glassed outside.
I thought its going to be a desaster. But now i believe in you.
It’s not worth it trying to cut the new sections of plywood to match the odd-shaped rotted edges. Just cut straight lines, like repairing drywall.
Nothing is more expensive than a cheap boat.
No fiberglass at all in the boat? 😮
I assume that comes next.
That stepped joint is only half as strong as a scarf
Waste of time you can never trust this boat with anyone’s life .
Maybe he doesn’t plan to cross oceans
@@markthomasson5077 hopefully
@@markthomasson5077
It’s interesting as a problem to solve I suppose, call it a learning experience at best……but for most it would be a money suck. There are many used boats better for the investment…
All opinion of course
Just hold the piece of ply up and mark it instead of paper