Thanks! I just bought my first ever Traxxas! All the Arrma trucks use a little jumper to switch modes, so I was curious how to switch this! Excited to try mt new Slash XL5
I just bought a 4000MAH lipo 3s battery. I still have a stock motor and setup I just changed the battery but it blinks green and red? It only steers, it doesn’t go forwards or backwards, any answer’s?
This ESC doesn't run with 3S battery. 3S is for all above, incl. brushless controllers. I picked up this noon my new 2S LiPo-s, those are the maximum for stock XL5 controller.
Yea thanks I figured that out a little bit afterwards. The stock esc will only let you use up to 8.4 volts, you can’t run a 11.1 volt on an 8.4 volt setup
Hey bro i have few questions about my traxxas E-Revo 2.0 can you please help me out. Feom this video seems like you know your stuff. Please help. I jist started this hobby and im lovin it.
When I put it on the first blink mode it goes full throttle for a bit, after a couple seconds it starts going slower and blinking red, do you know why it does that?
My brand new Traxxas (Bigfoot no.1) issonet react to eny thing tried this, and other thing and it not just cant do anything mine is just fast blinking red/green I was enable to get the 2 and the 3 bip, like in on traxxas site,but nothoing. Then I re binded with the controller, than guess what, the stereing work and still fast blinking the 2 color, so fast it is impossible to catch one. Also with nimh battery no matter what 5-6 minutes and after 3 minuts it alrready lost the power. My battery in the controller is new, also I always use storager mode. Ohh and one more thing, the Traxxas batter what was in the box, give me 4-5 solid meters and off. I guess the esc is just bad, doesn't work and also this one probably sitting years on the self and the battery and the esc is off now. I'm so mad bc is I send it back either I get a same old one or they say it is okay...I would tell them to try it with lipo and nimhon the pad it is okay just see if it works and how long the battery going. Mad af :(
If the Low-Voltage Detection (LVD) is "ON" when a nickel-metal hydride (NiMH) battery is used an ESC may show the over-voltage alarm, indicated by a flashing red and green light. ... If you have a Lithium Polymer (LiPo) battery, connect it to the ESC and turn it on.
I bought a 3s lipo gold bar battery and tried doing the same with my rustler and it wont work can some one help me, it stays flashing red and when hold to turn to lipo mode I'm only allowed to use my steering servo and no motors??
Having the same issue and can't find anything on it. Bought a 2s and switched to lipo mode but when I hit the throttle the green light turns off until I go back to neutral. Only have steering 😣
Sounds like you and kyle below may have to reset the transmitter... It sounds like its out of callibration to fix.... First turnoff the ESC then turnon radio first then hold down ESC button till the light turns red then flashes red once then letgo of the esc button instantly....... Then on the transmitter pull the trigger to full throttle then wait for the ESC light to flash red twice, Then do the same procedure to set your reverse then letgo of the throttle so its in neutral then test both throttle and reverse again it should correct it..... Cheers
Sounds like you may have to reset the transmitter... It sounds like its out of callibration to fix.... First turnoff the ESC then turnon radio first then hold down ESC button till the light turns red then flashes red once then letgo of the esc button instantly....... Then on the transmitter pull the trigger to full throttle then wait for the ESC light to flash red twice, Then do the same procedure to set your reverse then letgo of the throttle so its in neutral then test both throttle and reverse again it should correct it..... Cheers
@@alexace2575 Yw... I hope it helps yo out and gets your rig back on the road again if it does not contact me and maybe I can walk you thru some other steps to get her goin again..... Cheers
Dude thank you so much! I had my LiPo on NIMH and then I when I got it on LiPo mode I had it on the kid mode. You are a life saver.
Thanks! I just bought my first ever Traxxas! All the Arrma trucks use a little jumper to switch modes, so I was curious how to switch this! Excited to try mt new Slash XL5
This is the best most knowledgeable video on the internet. As I just got the lipo and wanted to switch modes and did not know how.
Thanks. I bought my traxxas used and had no idea of the other features
Im new to rc cars and this helped me a ton. thank you.
Thanks dude! I lost my instructions and just switched to LiPo. Super helpful.
Thanx, best vid on the subject🏁
Just the video I needed as a noob rc dad
I just bought a 4000MAH lipo 3s battery. I still have a stock motor and setup I just changed the battery but it blinks green and red? It only steers, it doesn’t go forwards or backwards, any answer’s?
This ESC doesn't run with 3S battery. 3S is for all above, incl. brushless controllers. I picked up this noon my new 2S LiPo-s, those are the maximum for stock XL5 controller.
Yea thanks I figured that out a little bit afterwards. The stock esc will only let you use up to 8.4 volts, you can’t run a 11.1 volt on an 8.4 volt setup
Thank you so much been a while and forgot how to switch it
What does it mean if it’s blinking?
I found that mine were shot over heated at one time and burnt it. Immediately goes to shut down.
Hey bro i have few questions about my traxxas E-Revo 2.0 can you please help me out. Feom this video seems like you know your stuff. Please help. I jist started this hobby and im lovin it.
Thank you
Your the biggest help for me I fried my nimh battery In lipo mode this is cool thanks know so that does not happen thanks
Thanks a lot.
Thank you man!
That helped a lot
Thanks man 🙏
Ok so today I drove my rustler in the water I was so glad it it waterproof and a vxl 4+4
Very NEIC..
When I put it on the first blink mode it goes full throttle for a bit, after a couple seconds it starts going slower and blinking red, do you know why it does that?
Thx
What battery did you plug in for it to work
Thank you!
What if the ESC keeps blinking red and green red and green after I hold the button down
that means you are using a nimh on lipo mode or ur using a lipo on nimh mode
What does it mean when mine continues to blink the green light?
Difference btwn 1:07 and 2:38?! You hold button the same... but at 1:07 it changes esc modes, and at 2:38 change battery mode??
for esc modes u hold the button when its off for lipo u tern it on then hold the button
My brand new Traxxas (Bigfoot no.1) issonet react to eny thing tried this, and other thing and it not just cant do anything mine is just fast blinking red/green I was enable to get the 2 and the 3 bip, like in on traxxas site,but nothoing. Then I re binded with the controller, than guess what, the stereing work and still fast blinking the 2 color, so fast it is impossible to catch one.
Also with nimh battery no matter what 5-6 minutes and after 3 minuts it alrready lost the power. My battery in the controller is new, also I always use storager mode.
Ohh and one more thing, the Traxxas batter what was in the box, give me 4-5 solid meters and off.
I guess the esc is just bad, doesn't work and also this one probably sitting years on the self and the battery and the esc is off now. I'm so mad bc is I send it back either I get a same old one or they say it is okay...I would tell them to try it with lipo and nimhon the pad it is okay just see if it works and how long the battery going.
Mad af :(
if the batter is old that could be a problem
Can you do this with 3s safely or will it overheat ?
3s will overheated the car if you want to run 3s on xl5 you need to buy the trx4 sport 3s xl5 esc
@@Greysonszokoly Even if u use the kid's mode?
I just tryed this and I try to set it back to my nimh and it won’t work help plz
Why dose mine blink green and red
If the Low-Voltage Detection (LVD) is "ON" when a nickel-metal hydride (NiMH) battery is used an ESC may show the over-voltage alarm, indicated by a flashing red and green light. ... If you have a Lithium Polymer (LiPo) battery, connect it to the ESC and turn it on.
Does this work for the Russell x L5?
any xl5
This wont work with 3s right?
right
Worked
Bro I don’t have the charger to charge the battery so what do I do and I lost my controller
Let me know if i can get in contact with you bro
I bought a 3s lipo gold bar battery and tried doing the same with my rustler and it wont work can some one help me, it stays flashing red and when hold to turn to lipo mode I'm only allowed to use my steering servo and no motors??
Having the same issue and can't find anything on it. Bought a 2s and switched to lipo mode but when I hit the throttle the green light turns off until I go back to neutral. Only have steering 😣
Sounds like you and kyle below may have to reset the transmitter... It sounds like its out of callibration to fix.... First turnoff the ESC then turnon radio first then hold down ESC button till the light turns red then flashes red once then letgo of the esc button instantly....... Then on the transmitter pull the trigger to full throttle then wait for the ESC light to flash red twice, Then do the same procedure to set your reverse then letgo of the throttle so its in neutral then test both throttle and reverse again it should correct it..... Cheers
Sounds like you may have to reset the transmitter... It sounds like its out of callibration to fix.... First turnoff the ESC then turnon radio first then hold down ESC button till the light turns red then flashes red once then letgo of the esc button instantly....... Then on the transmitter pull the trigger to full throttle then wait for the ESC light to flash red twice, Then do the same procedure to set your reverse then letgo of the throttle so its in neutral then test both throttle and reverse again it should correct it..... Cheers
@@angryyank thank you man I'll try this when I get off work tonight ill update once I get home!! Thanks again
@@alexace2575 Yw... I hope it helps yo out and gets your rig back on the road again if it does not contact me and maybe I can walk you thru some other steps to get her goin again..... Cheers
Saved my ass from boy smashing it