Review: R&D Instruments Pinless Moisture Meter Demonstrated

Review of the R&D Instruments Pinless Moisture Meter demonstrated on firewood and sawmill wood
Get it on Amazon - amzn.to/3H6YaZg
Shop Alternative Options on Walmart - walmrt.us/41M5ItX
If this review was helpful to you, you can purchase this product using our affiliate links above and we will receive a small commission at no added cost to you or visit our Amazon Influencer Shop here: amzn.to/3MEHrQq or our Walmart Influencer Shop here: walmrt.us/3MQmSAd to see all of our other favorite products
#Reviews #AmazonReviews #ProductReviews
About this product:
✅Instant and Precise Readings: It reads to a depth of approximately 19mm into the slab. Plus, the current reading can be captured via the hold function.
✅ Four Measurements:Easily set the wood species you need to measure. Offers a Relative (comparative) measurements.
✅FIRST STEP IN MOLD PREVENTION - by checking suspicious water stains with a moisture tester around the house, You can determine whether the area is wet (a perfect breeding ground for mold),but not tell the mold directly.
✅How to Calibrate at the factory: press and hold for 5 seconds on 'HOLD' button to reset the factory.
✘ It reads 0-5% on drywall(gypsum panel) -You are not recommended to make test on drywall, because the density of the drywall is too low to register a reading.(the actual readings will vary based on humidity and density of the material).
✅ ➜➜Very Important-TIPS 1: The pinless moisture meter is penetrates up to 0.75inches deep, so wetter materials located below your subject material can also influence the readings, as can metal nails, workbench, your hand, etc.
✅ ➜➜Very Important-TIPS 2: Wipe measured material surface dry and neat for best results. In addition, the measured material (walls,masonry and wood) being measured is not stacked or sitting on wetter materials.
Also check out our other channels here;
CZcams core Channel: / hardybrothersoutdoors
Facebook: / hardybrothersoutdoors
Instagram: / hardybrothersoutdoors
HBO Amazon Shop - amzn.to/3Rbwqbu
Tiktok: / hardybrothersoutdoors
Twitter: / hardyoutdoors
* As an Amazon Associate I earn from qualifying purchases. As an affiliate we will receive a small commission for many of the products you purchase at no additional cost to you.
We use Uppbeats.io for our music, try it for free here:
uppbeat.io/?as=HBO

[@hardybrothersproductreviews]

Get it on Amazon - amzn.to/3H6YaZg
Shop Alternative Options on Walmart - walmrt.us/41M5ItX
If this review was helpful to you, you can purchase this product using our affiliate links above and we will receive a small commission at no added cost to you or visit our Amazon Influencer Shop here: amzn.to/3MEHrQq or our Walmart Influencer Shop here: walmrt.us/3MQmSAd to see all of our other favorite products

[@lupatorres]

Sure!! many thanks for your help I will do this!!!

[@lupatorres]

Good video!! please can you inform the model that can measure a very tickaround 2,2 inhces wood board? Thanks!! Regards from Brazil!!

[@hardybrothersproductreviews]

Thanks. And Yes I believe it will work on a 2.2 inch board.

[@kenshinwood]

dont work, good luck

[@hardybrothersproductreviews]

Sorry to hear that. Works great for me.