Video není dostupné.
Omlouváme se.
How to disassemble Any HP Pavilion 15 P series notebook
Vložit
- čas přidán 10. 09. 2015
- In this new video i will be showing you how to take apart any HP pavilion P series notebook, it is a really easy procedure but as always do this under your own risk and be careful because if you did it wrong, you might harm your PC .
------------------------------------{Contact}----------------------------------------------
Thanks for watching
Please Subscribe if you Like my hard work.
Make sure to leave a like/dislike and comment on the video for any questions you have.
Primary support email: gamesmatrix2@gmail.com
Twitter account: / ananjaser
Your tutorial is perfect. Unfortunately for me, I’m still frustrated because I wanted to remove the top so I could clean under the keyboard only to find removing the keyboard looks super complicated! Lol. Hopefully, I can find a good tutorial on that too! Thanks so much for this video.
This is my Pc and I am going to change to a SSD, I was looking how to disassemble. Thank you very much it was VERY well explained
Hi Hazretleri, My laptop is also exactly the same. I would like to change my key board. it is not not working properly. But I don't know the model number. Could you please mention the same.
Thanks for the video sir! I needed to replace the the fan since it started making a hell of a noise. Wanted to do it all by myself and your video helped a lot particularly finding the hidden screws.
I also have a noisy fan that needs replacing! I followed the video and opened the laptop up, managed to get the motherboard up as the fan is accessed from underneath, but then couldn't see how to remove the fan itself! Would you be able to give any pointers or instructions?! Thanks in advance, any help appreciated!
@@tracieatkins1636 as far as I remember, there were some 3 screws that support the fan module in its place on the motherboard. I'm not exactly sure about the structure now, neither do I have pics for pointing, but I'm sure only the screws need to be undone to get the fan out from underneath.
@@shubhshar Thanks I'll have a look again. I was just a bit worried because I read somewhere on line some fans might need soldering!
Y'know, as much as i love my laptop, HP didnt design this one very well tbh
Lol, the people who designed this should be crushed with stones.
Thanks a lot. Played your video while taking apart my son’s HP to clean and check a noisy cooling fan. Nice clear commentary which is much appreciated.
Thank you soo much. Been trying to work out how to open mine for ages. I didn't want to force anything open without knowing how it actually opens up and it's taken me ages to find this video, so thank you :D
GUYS! To anyone stuck with the 3 screws in the disc drive : I have the solution!!
I tried to unscrew them with the smallest screwdriver I own but ended up stripping the screw completely....
HERE is the solution: Apply a little superglu on the screw, then put a small nut on the screw (nut diameter must not exceed screw diameter), make sure the nut is centered with screw and fill inside the nut with superglu. Leave it to dry for a few hours and then turn the nut with a spanner or pliers .
Worked great for me!! Good luck
My hp17-p110nr is pretty much the same for where all screws are, etc. But those strange flat "screws" under the optical drive tray, what kind of driver did you use to remove them? They're too flat for my smallest Phillip's. Please help! Have new fan to put in because old one died.
Thanks helped a lot! Turns out the only problem with mine was the CMOS battery died, thank you for the easiest fix ever
Thank you.. This video helped a lot, I disassembled my laptop and cleaned the fan which was causing it to overheat.. hope it does not bring me trouble later.
Marco Perez-MacCollum how did you clean the fan?
Saretnoc use a thick, round artist brush preferably made from natural bristles [to avoid creating static electricity, which can damage electronic chip components] to clean the fins and a hair dryer set on cold to blow away the dust as you brush. Never use a vacuum cleaner because they can suck too hard and spin the fan much too fast, more than it is designed to handle.
Thank you!
Thanks for a super tutorial, really helped me fix a laptop... could have damaged the laptop as did not see the "hidden screws".. fairly ok to remove afterwards. careful removing the data "ribbons".. brought the old laptop back to life after changing the hard drive.. Thanks again
Thanks for posting this ... Reminds me more of an aicraft mechanic pointing out the "non intuitive" tricks to take it apart (remove all screws, doesn't open because a hidden clip HP wants impatient people to break off, lol). Anyway, for repairs and upgrades .. AVOID HP. Period. Lack of easy access and a design making it almost impossible for a novice to upgrade memory or a hard drive is rediculous. Most other brands have small access doors on the back to replace a HDD or memory. Come on, what idiots at HP came up with this idea???
cdcollura it's such a shame how their new designs destroy any sort of upgradability without watching videos or following complex guides. Taking the laptop apart for the first time was extremely tedious and time consuming. They slowly started to limit upgradability with 2015 models by adding 1 Bay for rams only instead of rams hdd and wifi for a sleeker look. And now they ditched it all for a uni body like design. This is seriously backwards thinking.
Thanks, pesky hidden screws were holding me up!
me too!
Paul Sampson same here!
How come I am having so much trouble removing the CD/DVD drive? Screws have been removed but it almost seems as if applying more force will break it ...
theres a very tricky 0.5mm cover screw in the middle there
Great video! Needed help for cleaning mine. I had no idea how hidden the screws could be lol. Thanks a lot.
Thank you for showing me the HIDDEN screws place, I had 2 hidden ones. It was soo annoying. But What is more annoying is that corner, I can't get it off!!! I snapped my knife! I snapped my credit card! Trust me that corner is soo difficult to snap off! with so little gap!!
Anyhow I needed to remove my corrupt hard work, so luckily I was just managed to remove it through that 1 inch space.
I still can't remove that top though. I most likely damaged some stuff because I heard a lot of snapping. But I rebooted, everything working fine so far. keyboard included.
Now I want to know his will this motherboard support faster drive because my current corrupt one is slow, malfunctioned and I rather invest in a new one.
Anyways this video was indeed helpful for those who can remove the top part. I just needed to remove the hard drive so it was luckily in my reach at the bottom.
If my new hard drive doesn't work with this, I'm going to put this in the trash where it belongs.
All the computer manufacturers are hiding the HARD DISKS deep inside. It cuts down the amount of average people replacing them. Make it a bigger pain that way it gets sent back to a service center.
What tool did you use to remove the 3 tiny screws on frame on the DVD drive side?
Perfect. Stripping my mum's laptop as she spilt a drink over the keyboard and then told me about it 2 weeks later so it was well and truly dead. She just wanted the Randy Crawford CD out of it. lol
Thank you this has helped my disk drive messed up and I needed to get inside the laptop but I don't have a small screwdriver to get those three screws there or near the disc drive
Thank you for this video, now I know that laptop of yours is same as mine. It has two drive slots. for the HDD and SSD. Because I'm planning to upgrade mine to SSD.
This video Useful and inspired me to repair my HP laptop myself ❤ thanks mate.
I stacked with DVD and never figured out how to open this damn thing
Yeah same! @AJ1211 pls help us out
Dude just what i was looking. Tysm. This is the one video from this hp serie
What size phillip screwdriver do u need for that. Its really small.
Size 0.
good work > I have the pavilion gaming series it looks pretty much the same but I have seen another video , they don't remove the rubber legs . just pry the corners as whole
Many thanks. I got stuck on gettting the cd rom drive out could see the screw but had no idea and did not want to break it.
can you give me instructions for the hdd dvd caddy which one should i order/
Thanks a great video! I am trying to replace the HDD on my sons HP 15-P100dx laptop with a SSD drive and want to place the current 750GB drive in the optical bay with the adapter. They seem sell 2 kinds that are either 9.5mm or 12.7mm thick. Do you have any idea which one is needed for the HP Pavilion P series laptops. Thanks again!
+Herb Karasic I bought the 9.5mm 2 years ago and used it across all my HP laptops, Pavilion G6 / PAV 15 N and PAV 15 P So yeah i am pretty sure the 9.5mm is the way to go. Btw make sure to put the SSD in the Primary Slot and the HDD in the optical drive bay since the SSD needs sata6gb/s while HDDs work fine with 3gb/s
Any tips on removing the secret screw under the sticker at 3:55 ? I absolutely can't remove the sticker
Hello
Can you please share a video of same laptop HP Pavilion 15 P series to replace keyboard
thank you very much
i ve look many times for this
its seems to hp pavilion 15 ab 236-ne
Can anyone tell the screwdriver head size needed for those small CD drive slot screws.... I have a set but nothing fits.
pls help , unable to open the screws under the optical drive, please suggest which screwdriver to be used for them
very small phillips head!
Me too it's stuck, flat screw
I had to get a small Philips and pound it into the screw head with a hammer (not too much force) and was able to get it out.
Excellent video, but to change the reader for the HDD and what was the HDD for SDD ... I have the same laptop but in AMD HP Pavilion 15-P002la (CLEAR THAT YOURS IS INTEL, WOULD YOU KNOW IF THE STRUCTURE IS SAME FOR THOSE MARKS?), And my reader no longer reads the discs, YOU COULD MAKE A TUTORIAL OF THE SAME LAPTOP OF HOW TO CHANGE THE UNIT OF READING BY HDD OR SDD, PLEASE ....
Porfavor .... Since there are also Caddy of 9.5mm and 12.77mm and I do not know which of the 2 is for the video model .... Please a tutorial
Thanks for sharing.
How do you replace the RTC battery of the same model of laptop?
Many thanks - very helpful. Appreciate the time you took to put it together.
Is there anything you can do if the thing that holds the cables down breaks
many thanks great video, one problem i have is my screen wont come, the cap lock key just blinks, can you help?
Excelente, me sirvio para abrir una igual y cambiar el disco por un SSD
Thanks for this video. It confused me as to why my keyboard wasn't coming off straight away until i watched this video and realised that there was a hidden screw like at 3:50
What screwdriver do you need to take off the flat screw near by the optical disk drive? I can't find one small enough
#00 (2mm)
Thanks the same as my laptop exactly... I have the same model... Thanks for the help
Excellent disassembly video! I couldn't have got into my laptop to get to the hard drive without it!
Great Videos, thanks man you deserve million view and clicks....
could you please do video regarding ram upgrade , where u remove the motherboard please
HELP!I have removed all screws from the back, but the cd part wont come out, it's still in there. I turned on my pc and clicked it open, shut down the pc, and tried to get it out but nope. What am I doing wrong? Mine is a hp pavilion 15-p106no, but physically it's exactly the same!
Armani Dehani me too, somebody help please!
Remove the plastic fascia panel on the end of the DVD drive, and when it is pushed back in the screw underneath is accessible
Dirk Bruere thx bro, I was getting so frustrated and realized that all I needed to do was pull out the front of the disc thing .
Thank you so much i was going insane xD
Someone pls explain !!!!
Hi I'm glad I found this, one of the hinges on my exact model of this has slightly separated which prevents me closing my laptop screen would you advise taking it to a store (as I've never attempted to get into a laptop before) or is this not such a difficult thing to do?
Hi! Great tutorial. I added some RAM and changed my HDD to SSD. Unfortunately, when putting them back I broke two or more pins on the keyboard socket connector and now most of the keys won't work (Power button and Touchpad still works). I still would like it to be fixed even though I'm using it already with an external USB keyboard. I found some tutorials about soldering the pins but I'm not confident to do it. I'm also thinking of buying a motherboard replacement but obviously they're too expensive. Hoping someone could help me.
I am using this same laptop for last 10 Years.Insanely Awesome and Nice Magic from Hewlett-Packard
me too. it's really reliable. since 2015 to 2024
Damn when did this even get 500k views
600k to be fair. Thanks for the video dude.
Wow. Thank you for creating this. This is one of the worst notebook ever designed. too much trouble only to upgrade this.
wow thanks for the video but golly gosh all this trouble to take out a hard drive ? what a poorly designed laptop
+hiewy The P series is so far the WORST HP Laptop i have dealt with when it comes to upgrading / taking apart,
I guess they are trying to go down the Unibody route
new toshiba's are worse. so i have to removethe motherboard to upgrade ram dam that sucks
Hp tends to be like that always
it's a fucking designed laptop
just broken a new fucking one
Can you tell me where did you find the hard disk caddy for optical drive,please????? I'm looking for it but i can't find anyone for my hp pavilion 15
Matteo Fazio Try ebay, I got mine from there for my HP Pavilion dv6 3000 series some years ago, what a speed up difference it makes adding an SSD and upgrading the DVD drive bay with a caddy to install a 2TB 7,200 rpm HDD in there as a data drive. This notebook originally had a 650 GB 5,400 rpm HDD.
My lap top like this is in thermal shutdown people say I need to clean out the fan but I'm scared to do this I might really mess up my computer. I really need to get it fix I can't stand being with out it.😔
Hey ..can you specify the size of the caddy you used for replacing the cd rom with HDD/SSD. Thanks!
hey nice job! is there a touchpad with 2 mouse button for 15p series? can you take any model and tinker with it?
I have the red and black pavilion those ribbon cables can I just pull them out I know some they have a plastic clip you have to depress in order to remove them I just wanted to make sure before I don't break anything
Hi. Thanks for the video guide. I wanted to upgrade my SSD. Does this model supports M2?
The one in the video does not. has only 1 hdd slot
What size screwdriver do you need in order to remove the really small flathead screw underneath the optical drive when the optical drive is removed?
Is there any way to replace the keyboard without having to replace the whole top? I can't figure out how to remove the keyboard from the frame. There's a layer of plastic over it and some small black plastic pins... Hope someone can help, because lots of people asked this
Thank you very much! But I have doubts in the rubber of the back, the support gums, they are not easy to remove and if I take them by force they will be able to reinstall again? And the plugs that cover two screws also come out, could you help me?
also need that, i cant get mine out at all, doesnt look like they come out at all PLEASE HELP
Can you tell me about size of head screwdriver to open two small screws near CD driver
Great video. Is that what i would have to do if i just wanted to replace the hard drive?
yes this is what i am doing now
I have that same laptop but the flat screw behind de DVD drive (there is only one btw) have the head damaged. Do I need to remove it to just detach the front panel with the keyboard?
hi there, what caddy u use in that video? 9mm or 12mm, do the original hdd fit in it? I'm thinking of buying 2.5 ssd and swap it with my original hdd. thank you
Good Video, Can I install "mSATA Half size SSD" hard drive in this type of laptop?? i have "HP pavilion 15-p045tx" laptop. but i don't want to remove inbuild parts like HDD, DVD writer...please awating your good reply..
Sir my HP Pavilion Notebook TX Model 15 Prod ID T0259 power off and heating problem is not on please help me
Hello this is a nice video! I have one doubt; my computer is 1 year old and the fan started to sound a little bit harder like a week ago, do you think the fan is thrashed or maybe only dirty? I used the laptop in very dusty areas though. do you think an external cleaning will do the trick? or maybe dissassemble it anc clean it from the inside? any way of knowing via software if my fan is not working well? thanks : - )
+Santiago Hernández well , if you used the laptop is a dusty environment then i would assume that the fan was damaged due to heavy dust , or the fan is just dusty and needs rough cleaning , eathier way you need to take a look inside the computer , 1 year in a dusty environment should be enough for alot of dust to build up
Can you provide a link with the same kind of cover (i got the caddy but its open, so the dust gets in from there) for uniformity
Cool video Man! but hey I've got a problem, it's about the keyboard, multiple keys doesn't work, I mean I can press them but they do not respond, also my keyboard's light turned off and I can't turn it on, the keys that doesn't work are 6(in both pads, keyboard and number pad), 5 in keyboard, ?, ' , f2,f5, and others... My laptop is a HP P series, beats version, is a black with red color.. Please man, if you can answer me it would be awesome! I'm so delayed in school projects /: cause of that. Thanks
Hi. Thanks for the video, as needed to replace my failed hdd
quick question, do you think thermal pads would help these series of laptops with some heat dissipation? and if you do, on what parts of the motherboard would you put the thermal pads?
what are the spec of this notebook screws, im upgrading one now but many of them are missing and im gonna be the one to blame im sure... any help?... thanks in advance
Thank you. Your video helped me
thanks!!! it has help to me a lot :) God Bless You dude!! :)
+MAXIMO DESARROLLO I am glad it did.
My cover wont open, all screws opened, doesn't come off though. Stuck around the power button even though the edges are "open".
I bought this Laptop 2 years ago for MYR 2599 (577 Euro)
I'm now in Europe, and they're selling older models, which are weaker, for 599 Euro - and a similar model for 999 Euro. We're talking about 2 years later. Why are the prices in Europe so much higher???
My guess is taxes. Generally electronics are cheapest in the US tho if you compare the average iirc
I have some questions? HP Pavilion 15-ab293cl is my laptop model.. Does this support ssd along with hdd?? If yes what type of ssd does it support?? And does it have a slot for graphics card?? Does it have a PCI or PCIe or 16x PCIE slot??
I do have a hp pavilion 15 p077tx I want to clean my fans too I also want to check if my laptop supports mini pci port for external gpu
What type of screw driver did you used for opening dvd drive
my hp pavilion has blue plastic over the two outside battery screws. do I need to go through this to be able to open my laptop? I can't find a new video anywhere.
Very helpful, thanks @Games
hi got a problem on that screw once you remove the optical drive that flat thing how did you remove it?
Cool! Could you please make any videos of how to install SSD and how to upgrade the ram for the same series. Or if there are any videos plz comment
please I have hp pavilion p248ne. ..can I add second hanrd to this type ...I want to put HHD and SSD in same time
Hi! The caddy size for that laptop is 9.5mm, right?
Great vid. Thanks!
hello sir just wanted to know the dvd cuddy size to buy. Please help me buy it
Looks like the HP I just recieved which needs a keyboard replaced. Thought it would come out through top and I was wrong.
I'm thinking about replacing the keyboard, how would you remove the keyboard out of the frame?
same here
Same question from my side
@@harshjain1207 Don't do it. I tried it shortly after this comment was posted to discover that it is not replaceable unless you know how to solder it back into place which is not an easy task at all. I destroyed the laptop in the process of attempting to replace it without soldering.
Can you tell me where the internal battery is located? I can't really see it so I guess it must be under something.
How to access RAM?
thanks for the explanation !
can you tell me if the wifi card has 2 antenna cables want to upgrade to ac wireless
where did you get optical drive converter to become hard disk?
Thanks man 👍 this vdo helped me!
Hi any way you could help me find a replacement led for this exact laptop
Do you know if it is possible to put a SSD NMVe M.2 (PCIe 4x) in the Wifi slot?
Very useful video. Thanks