96 Yukon - Dash Gauge Cluster Repair - No more bouncing needles!
Vložit
- čas přidán 2. 05. 2022
- after watching a couple of other useful CZcams videos I decided to tackle repairing the introduction of air into the little step motors for the fuel and the oil pressure gauge. when doing my research I always like to watch a few different videos to get different angles and perspectives and suggestions on how to do it so I figured I would make my own video as well.
Whoa. That's really great.
Going through similar issues. I appreciate the helpful info and taking time to make the video.
Oil gauge - pull needle off,🎉 hook up gauges to truck, turn on key, set gauge to 0 and you'll be set
Sprayed mine with silicone spray real good works great
Can you ask your friend how to bypass that pin that " tickles " the alternator?
could you please tell me the supplies you bought and where thanks
Ware did u buy the lubricant oil from
What silicone grease do you use..?
Is superlube grease ok ?
I use silicone spray and it's working better on the fuel gauge but the oil pressure gauge is still erratic
Could you please leave a link or the name of the "oil" you used so I can do this to all my motors
czcams.com/video/eduY4bX7rUQ/video.html
“Auto dampening silicon fluid”
What is the green light at the upper left what looks like a headlight symbol
Daytime running lights. Light goes out when lights turned on.
Or can I use any type of oil.
Replace them if you can find them...
😴 ᵖʳᵒᵐᵒˢᵐ
I also call my gf my friend😂