How To Program A 2017 - 2020 GMC Yukon Remote Key Fob - Add A Key Lost Keys Programming Sync Pair

A step by step video on how to program a smart key remote fob to a 2017 - 2020 GMC Yukon and Yukon XL
If you already have at least two working remote key fobs for your GMC Yukon there is a shorter programming procedure than the one shown in the video that you can use. You can find those programming instructions here www.programyourremote.com/cla...
*This will only apply to GMC Yukon's that have push button start ignitions.
1. Using the Yukon driver's door, turn the key counterclockwise to the unlock position five times within 10 seconds. The Driver Information Center(DIC) displays REMOTE LEARN PENDING, PLEASE WAIT.
2. Wait for 10 minutes until the DIC displays PRESS ENGINE START BUTTON TO LEARN, then press the ENGINE START/STOP button. (You may have to open and close drivers door to see the DIC display). The DIC display will again show REMOTE LEARN PENDING, PLEASE WAIT.
3. Repeat Step 2 two additional times. After the third time all previously known transmitters will no longer work with the vehicle. The DIC displays PRESS ENGINE START BUTTON TO LEARN, then press the ENGINE START/STOP button. (You may have to open and close drivers door to see the DIC display). Remaining remote key fobs can be relearned during the next steps. The DIC display should now show READY FOR REMOTE # 1.
4. Place the new smart key fob in the transmitter pocket in the GMC Yukon's center console .
5. Press the ENGINE START/STOP button. When the smart key remote fob is learned, the DIC display will show that it is ready to program the next remote key fob.
6. Remove the smart key fob from the transmitter pocket and press unlock or lock on the transmitter.
To program additional transmitters, repeat Steps 4-6. When all additional transmitters are programmed, press and hold the GMC Yukon's ENGINE START/STOP button for approximately 12 seconds to exit programming mode.
This how-to video tutorial can be used to program the smart key remote fob on the following GMC models:
2017 GMC Yukon ( SLE, SLT and Denali )
2018 GMC Yukon ( SLE, SLT and Denali )
2019 GMC Yukon ( SLE, SLT and Denali )
2020 GMC Yukon ( SLE, SLT and Denali )
More free DIY programming instructions available at www.ProgramYourRemote.com
Find a Locksmith in your area with www.LocateALocksmith.com