BIG PROBLEM HERE!! SUPER EDUCATIONAL - DIESEL INJECTOR PREMATURE FAILURE!!!

Sdílet
Vložit
  • čas přidán 7. 09. 2024
  • WE HAVE MORE INJECTORS THAN EVER BEFORE
    THIS Toyota Prado 2013 MY 14 update 130 thousand kilometers has problems AND NEEDS NEW INJECTORS ASAP URGENT
    Fourby4diesel 
    Premature injector failure
    Load
    Injection volume
    Main injection period
    Injector problems here
    Noisy engine
    Clattery diesel
    Toyota denso 1kd-ftv

Komentáře • 12

  • @barrenoasisgroup
    @barrenoasisgroup Před 2 lety

    There's are other diagnostic vides readings for floged injectors showing raised readings for all 4 individual injector feedback val between 1.5 to 3.8 also raised calculated load, injector volume & main injection period. Then you have this vehicle with also floged injectors with all the stated readings above showing lower why is there this difference for the same fault.
    Apologies if you have already explained this previously👍

  • @stewatparkpark2933
    @stewatparkpark2933 Před 2 lety

    Gunk was probably acting as a sound insulator . Now noisier after gunk removed .

  • @guri131
    @guri131 Před 2 lety

    That is a horrendous cold start. My 2KD is almost petrol like silent on dead cold start

  • @colinvandenhoff6343
    @colinvandenhoff6343 Před 2 lety

    I wonder if the no 4 injection value changed because you jiggled the wires on top of the injectors.....went from 4 at the start to 0......🤔

  • @Justinvz123
    @Justinvz123 Před 2 lety

    What should the load and inj volume be on a 2013 Hilux? Point me to the right video Pleeease?

  • @mortenhaugan851
    @mortenhaugan851 Před rokem

    Hey Anthony, I have Prado 2007, I have seen many of your videos, like to follow your recommondations about my spesific car, it has 218 000km.
    it was said to have new injectors, that have been confirmed by a orginal Toyota dealer, but I suspect aftermarkedinjectors have been put in, I have
    only put 10 000km on the car since purchase. When I start it up (cold 0 degree) it has a funny sound until it reach working temperature, then it
    sounds ok. oil&filter is ok. I want to ask you about scan tool, do you have some recommondations ? price up to dollar 500.
    By reading out the injector codes I would probably tell if the injector are good. Best regards from Morten, Norway.

  • @scottgrove9821
    @scottgrove9821 Před 2 lety

    What ended up being the issue? Would be great to have a follow up on this one. Cheers for the

    • @Fourby4Diesel
      @Fourby4Diesel  Před 2 lety

      Just watch the injector playlist you know it’s Injectors

  • @Nico-vt4il
    @Nico-vt4il Před 2 lety

    Hey Anthony, is there a decent scan tool I can buy for up to $500.00 that will read the readings shown here?
    Thanks,
    Nic

  • @anonymity6876
    @anonymity6876 Před 2 lety +1

    👍🤘😎🇦🇺🍻🎅