Video není dostupné.
Omlouváme se.
Fix P0101 Error Code on VW Cars Intake Air Straightener
Vložit
- čas přidán 9. 09. 2019
- The honeycomb air straightener: performancemrp.com/c-1389190-...
*Not sponsored, I paid for it! Just wanted to share this tip.
TheApguys.com is where I got my Cobb Accessport. Running Stage 1 tune with high boost! 18psi
Thank you so much for the shout out! We are so happy this helped!!!!
I put the Cobb SF INTAKE on my 2012 GTI and now i have the P0101 and the P2177. Fuel trims are way out of wack and the car surges. Giving this a try. *fingers crossed*
Those are pretty common codes. I got them too. This should definitely help! Just FYI I still get the codes every few weeks but they go away after a few days and don’t come back for weeks. I monitor my MAF through the Cobb Accessport and the numbers are fine. It’s just a very sensitive sensor which causes the check engine light. Good luck Luke!
finally a solution for my eos, thank you!
Wow, i need this
Throwing the same code?
I'm using a kermatdi intake on my mk6 and got codes, I bought one of these straighteners , I'm wondering if I should put it before the filter or after the filter, after the filter is literally only 2-3 inches away from the MAF sensor, so that's why in wondering if I should put it before the filter.
It's gotta go before the MAF so wherever you can fit it.
How many inches/cm from the maf did you mount this? I'm thinking of using an adhesive to further secure this.
My car doesn't have a screen already like yours does and my MAF is quite a distance away from the air filter mounting location.
I do not remember honestly.
can i buy this in uk
I’m getting the codes as well as stuttering acceleration? Was this something you had too?
It might be the car going into limp mode. I honestly don’t remember if I had stuttering accelerations.
Or alternatively you cold just take that hot air intake off and reinstall the factory cold air intake...
That didn’t help my problem it actually made my car give me a few jumps while driving it. Like it was going to turn off. Any other suggestions.
Did you make sure it’s installed flat and not at an angle?
Ami no me resulto compre el air flow straightener y me volvio a prender el check engine ahora que ago para quitarlo
reinstall your factor intake....problem solved.
I hope this fucking works, this is the only god damn code I keep pulling and I can't pass emissions because of it, despite the fact it runs fine.
The most annoying thing of all time. Good luck! It still comes on randomly for me for about 2-3 days at a time and then goes away but also running stage 1+ now.
@@shouldigetit I have a cold air intake and an aftermarket intercooler, I wanted to get a tune but that might take awhile since I spent too much dealing with this nonsense.
Did it work for you?
@@joshuahergon6790 no lol, it was some bullshit thing to do with there being 2 different air intake variants and I'd installed the wrong type