Were we CRAZY?? | 3 month CARAVAN BUILD | STYROMAX Composite panels installed

Sdílet
Vložit
  • čas přidán 21. 11. 2020
  • Hello EVERYONE!!
    How are you all doing??
    So, this is our second last video on our Caravan build, we hope you enjoy it! Its crazy it only took us 3 months with some chilled days in-between but also some CRAZY days where we often questioned if we bit off more than we could chew!!
    Thanks heaps to everyone that's watched and sent us massages along this part of our lifes journey! We really hope to have inspired you guys to get out and create with you hands, mind, body and soul!
    See you guys soon!
    Check out _aprilandjack_ for what we get up to in some what real time!
    Life is there to be lived so let's get out and live it, together!!
    #caravanbuild #vanbuild #tinyhome #vanlife
  • Jak na to + styl

Komentáře • 85

  • @man.i.literally.failed6772

    For anyone who wants to know, if you can make your own chassis or get a trailer mob to make it, a $75k + caravan can be home made for $30k using the same panels here, $30-35k will get you a nice 16-18 foot caravan

  • @timcroft8633
    @timcroft8633 Před rokem +6

    Be great to see a cost breakdown guys

  • @anthonypisano1192
    @anthonypisano1192 Před 3 lety

    So good ! Good job to you both

  • @nataliekeane8944
    @nataliekeane8944 Před 3 lety

    It's looking amazing, you guys are doing an incredible job. Can't wait for the interiors!

    • @JackCanDoIt
      @JackCanDoIt  Před 3 lety +1

      Thanks Natalie! Its been a great journey! You will enjoy what April has done with the inside! new video coming soon :)

  • @katherineporter2654
    @katherineporter2654 Před 3 lety

    It’s looking great guys. I was gob smacked at how the roof went on and then it became the front as well. Look forward to the. Next episode

    • @JackCanDoIt
      @JackCanDoIt  Před 3 lety

      Its crazy how far technology has come isn't it Katherine! Thanks for the comment :)

  • @TheKKnut
    @TheKKnut Před 3 lety

    Just awesome! Great teamwork guys. I gotta pull my finger out and get into this.

    • @JackCanDoIt
      @JackCanDoIt  Před 3 lety

      Hopefully we have inspired you to do just that!

  • @zulustu8214
    @zulustu8214 Před 3 lety

    I reckon you have done it the right way…. Building inside out is the way to go… just so simple and to confirm where your services are going and space you will have… well done… that’s how I’m going with my EOne Firetruck…. Looking good guys

    • @JackCanDoIt
      @JackCanDoIt  Před 2 lety

      Thank you :) it was all a big leasing curve & we are stoked with the outcome.
      Good luck with your truck :)

  • @wilsontan887
    @wilsontan887 Před 3 lety

    April/Jack amazing work. Dreams !!

    • @JackCanDoIt
      @JackCanDoIt  Před 3 lety +1

      Thank you :) we are pretty stoked with it! better than buying a new one

  • @jorjimaco5331
    @jorjimaco5331 Před 3 lety +1

    F#%k yeah, 22’, dumpt on it guts, fully sick candy apple, 40’ kickers!

  • @trekcampfish
    @trekcampfish Před 3 lety

    Well done team ...be nice to one another ..it’s been a massive gig

    • @JackCanDoIt
      @JackCanDoIt  Před 3 lety +1

      Thank you! it has indeed. We have learnt so much, especially about each other!!

  • @1farmgate
    @1farmgate Před 2 lety

    Awesome build, may I ask where you got the outside panels and the windows with the blinds and a rough cost please oh and what are the panels called?

  • @Rob-bn6wg
    @Rob-bn6wg Před rokem

    Amazing work right there. Any idea what's the weight of the full build without chassis?

  • @adrianschonborn
    @adrianschonborn Před 9 měsíci

    Hi guys
    Where abouts you got the outside panels joiners trims . Thanks

  • @alansailing1387
    @alansailing1387 Před rokem

    Well done. How much difference did it make to the weight of the van from the original?

  • @jedics1
    @jedics1 Před 2 lety +4

    I looked into using the styromax when I built my tiny house truck 2 years ago, it was going to add about 10 grand to my build cost so I just went with regular coolroom panels. I recently reversed into a tree and crushed a corner but should be able to fix it for about 100 bucks, I shudder to think how much a repair with the styro would end up being. Anyway Im here because I might do another build one day and given the budget I would try the styro mainly for its weight saving and superior insulation compared to steel lined foam panels...

    • @Eddie.h
      @Eddie.h Před rokem

      Hey, where did you get the cool room panels? And how are you finding them, are they enough insulation by themselves?

    • @jedics1
      @jedics1 Před rokem +1

      @@Eddie.h what do you mean by themselves? You still need a heating and cooling source whatever you choose, metal is not a good material to use but if you cant afford the extra 10 grand for styromax then they are the next best thing.

    • @jedics1
      @jedics1 Před rokem

      @@Eddie.h Askin panels in Adelaide

  • @gggmaverick5896
    @gggmaverick5896 Před 2 lety

    Hey, how's the travelling going?
    I'd be keen to follow your journey

  • @thebestbros5836
    @thebestbros5836 Před 2 lety +1

    Hi jack and April
    What brand are the windows and door
    Cheers

  • @geoffstein3896
    @geoffstein3896 Před 3 lety

    Looking crazy good. Will you be doing a cost video? Look forward to seeing it as depending on cost it has inspired me to do the same thing.

    • @JackCanDoIt
      @JackCanDoIt  Před 3 lety +2

      Thanks Geoff! We sure will be doing a cost video! Hopefully we've inspired you tp create something!

  • @denton3385
    @denton3385 Před rokem

    Guys how did you get the shed for your build.

  • @michaelross455
    @michaelross455 Před 2 lety

    Hi. If i may ask where did you order the windows. Can you share the links if posible

  • @ivansepulveda4961
    @ivansepulveda4961 Před 2 lety +5

    Hey guys! What an amazing job that you guys just done! Well done and congratulations for the time and dedication that you guys put in this incredible project. Missus & I are in video number one. Baha! We have plenty more to go.👏.. Quick question where about in Australia did you guys get the panels from?. Walls and roof. Cheers 🍻

    • @JackCanDoIt
      @JackCanDoIt  Před 2 lety +1

      Hi there Ivan, thank you for your kind words!
      It was one heck of a build! Hope you've enjoyed the videos :)
      A company called styromax, they are located in Brisbane :)

  • @BuiltToRace_com
    @BuiltToRace_com Před 3 lety

    Low strength silicone on just the furniture (to the wall) would making doing an interior change or refit easy

    • @JackCanDoIt
      @JackCanDoIt  Před 3 lety

      It would but we also wanted to use this area as strength :)

  • @zoezoe610
    @zoezoe610 Před 3 lety +2

    Is there a cavity in your walls for wiring to power points etc ? Looks good.....

    • @JackCanDoIt
      @JackCanDoIt  Před 3 lety +2

      Hi Zoe :) We ran all our cables through the joinery so it is easy access when we need to get at them!
      We didn't want anything running through the core off the wall. Much easier this way!

  • @darrencampbell2673
    @darrencampbell2673 Před 3 lety +1

    Hey guys, was fun. Where can you get plans for the foam walls from?

    • @JackCanDoIt
      @JackCanDoIt  Před 2 lety

      Call up Styromax Brisbane, they will assist you :)

  • @markcarlile5209
    @markcarlile5209 Před 3 lety

    You will need to use an adhesive to hold the blinds on and you will also need to put a sealant on the taillights as dust will ingress through the back and water will also unless sealed.

    • @JackCanDoIt
      @JackCanDoIt  Před 3 lety +1

      Hey Mark apparently no need for adhesive on these blinds. Unless you have had a bad experience with the exact set up?
      We will be sealing all lights when we have a moment, just didn't get around to it!
      Thanks for the message :)

    • @markcarlile5209
      @markcarlile5209 Před 3 lety

      @@JackCanDoIt rubber seals are good but red dust will find it’s way past unless positive pressure inside van.

    • @markcarlile5209
      @markcarlile5209 Před 3 lety +1

      @@JackCanDoIt great build for a young couple. You have really done well and learnt a lot. You must be pleased with your work.

  • @ryansimpson9351
    @ryansimpson9351 Před 3 lety +1

    Hey, just wondering if you guys were from Adelaide. Also when you travelled Australia, did you got to point lowly for a couple days? It's just outside Whyalla.

    • @JackCanDoIt
      @JackCanDoIt  Před 3 lety

      From Tasmania originally & we were there but not for long. maybe a day stop over.

  • @marty5378
    @marty5378 Před 3 lety +4

    When will the cost video be up. I’m curious how much the panels where.
    What’s the overall length of your van.

    • @JackCanDoIt
      @JackCanDoIt  Před 3 lety +4

      van is 7meters. we will have cost up soon, just been enjoying the van!

  • @cameronbudge
    @cameronbudge Před 3 lety +1

    Awesome, wondering what brand model of windows you fitted

    • @JackCanDoIt
      @JackCanDoIt  Před 3 lety +2

      They’re from Aussie travellers ☺️☺️

  • @TheLordsaviour
    @TheLordsaviour Před 3 lety +1

    Hi, what trim are you using on the edges. How are you holding them on?

  • @patryanlrd666
    @patryanlrd666 Před 3 lety +2

    Great project. Are you doing a cost etc video?

    • @JackCanDoIt
      @JackCanDoIt  Před 3 lety +1

      Thanks Pat, we sure will be as well as a full walk around!

  • @gailmartin524
    @gailmartin524 Před 3 lety

    Hi can you please tell me were you got your window blinds from thank you

  • @waynekerry2115
    @waynekerry2115 Před rokem

    Hi guy how did the final build finish up would love to see the finished product
    Hope you are still around posting

    • @dicko3160
      @dicko3160 Před rokem

      Yes, they did. Go through their video playlists

  • @yarrick88
    @yarrick88 Před 2 lety +1

    Hey nice build Journal you 2. Just curious how much does that composite panel way and is it aluminium or steel?

    • @JackCanDoIt
      @JackCanDoIt  Před 2 lety +1

      Its all Fibreglass & weighs about half of what a aluminium & timber panel would pin a normal caravan.

    • @yarrick88
      @yarrick88 Před 2 lety

      @@JackCanDoIt deadset!!! Cheers guys

  • @simonvance8054
    @simonvance8054 Před 2 lety +1

    Great idea.... caravans are overpriced... I like some features of all of them but not all of any of them!.. So I'm thinking of building my own...maybe having the trailer / shell built then totally customizing the interior...

  • @n8o8n
    @n8o8n Před 2 lety +2

    What adhesive/sealant did you use?

    • @JackCanDoIt
      @JackCanDoIt  Před 2 lety

      If you Contact StyroMax Australia, they will assist with this question :)

  • @vnyeu
    @vnyeu Před 2 lety

    Hi. Where do you cut those outside panels

    • @jwiereng
      @jwiereng Před rokem

      StyroMax. This was mentioned numerous times in video

  • @Anatol.Junior
    @Anatol.Junior Před 3 lety +1

    Hello, what glue do you use and is it a strong Bond? 😳

    • @JackCanDoIt
      @JackCanDoIt  Před 3 lety +1

      Its an amazing bond! its called Teroson 939

  • @mattokane3069
    @mattokane3069 Před 3 lety

    where di you guys get your chassis from ?

    • @JackCanDoIt
      @JackCanDoIt  Před 3 lety

      Our old caravan. go and watch our first video

  • @aspectabove
    @aspectabove Před 3 lety

    How comes no mastic seal in the windows?

  • @olegbalakaev5988
    @olegbalakaev5988 Před 2 lety +1

    the frame is weak, there is no rigidity, it will quickly fall apart on the off-road, and so the idea is good

  • @escapewiththemumfords7559

    Did you buy everything from styromax

  • @justrelaxaiie
    @justrelaxaiie Před 3 lety

    What type of windows are these??

    • @JackCanDoIt
      @JackCanDoIt  Před 2 lety

      If you contact styromax, they will assist you :)

  • @lancek4485
    @lancek4485 Před 2 lety

    You guys never heard of Pickles

  • @escapewiththemumfords7559

    Do you have Facebook?

  • @FernandoVillegas_KuizKuiz

    Now I understand the fingers down, the recording is terrible, too much camera movement, the details not seen well

    • @JackCanDoIt
      @JackCanDoIt  Před 3 lety +1

      Hi Fernando, thanks for your input.
      We have had a couple of people say this and will aim to keep doing better with each post!
      :)
      April & Jack

    • @dijanaburkinshaw891
      @dijanaburkinshaw891 Před 3 lety +1

      Would love to know where the windows are from also!

  • @juul2736
    @juul2736 Před 3 lety

    hi i would really like to follow ur instagram but cant find it!

    • @JackCanDoIt
      @JackCanDoIt  Před 3 lety

      Hey there Juul, sorry for the late response. Our Instagram isn’t April and jack anymore since we stopped travelling. It’s aprilgraceway 😊

    • @juul2736
      @juul2736 Před 3 lety

      @@JackCanDoIt wauw thanks for responding! ill be following you😄👍🏻