HOW TO // Zero Resistance Throttle Install - The BEST Throttle Tube On The Planet
Vložit
- čas přidán 27. 07. 2024
- Welcome back to the mXrevival CZcams Channel!
So you've finally taken enough soil samples and realized your stock, plastic throttle tube just ain't worth replacing again.
I'm proud of ya! You've come to the right place!
Today, you'll learn how to install your new Zero Resistance Throttle quickly & easily using this tutorial.
You'll be armed with the right tools before you begin your install, as well as a all of the steps to get it done right the first time.
The ZRT is unlike any other throttle tube on the market today due to it's dual-bearing design.
The ZRT is extremely tough, eliminates internal bar-drag that plagues OEM & conventional aftermarket replacement throttles, and provides an ultra smooth, crisp throttle action.
Today we are installing the ZRT on our 2018 Suzuki RMZ450. Ride something else? Don't worry, Instruction will be largely universal and apply to all bikes.
So, weather you're a seasoned Vet, or this is your first time working on a dirt bike- We've got you covered.
If you have any questions regarding this install, please comment below. We would be happy to help.
For more awesome MX bike content, please visit our other social media outlets:
-mXrevival Website:
www.mxrevival.com/
-mXrevival Instagram:
/ mxrevival
-mXrevival Facebook:
mxrevivalonl...
You can learn more about the Zero Resistance Throttle by visiting their website & Instagram below:
-ZRThrottle Instagram:
/ zrthrottle
-ZRThrottle Website:
www.zrthrottle.com/
Thanks for watching!
PLEASE LIKE & SUBSCRIBE FOR MORE!
#GNCC #OffRoad #ZRThrottle - Sport
📌📌📌OVER TWO YEARS NOW since I installed this Zero Resistance Throttle & this sucker still feels new! - 2018 RMZ450 - Guys it's time to upgrade! www.mxrevival.com/product-page/zero-resistance-throttle 😍 It's a little weird asking guys at the track if they *_"wanna touch it"_* but everyone loves the smooth and light action of this throttle. THANK YOU GUYS FOR THE LOVE & SUPPORT! 📌📌📌
Always with the priceless info, thanks for posting this! Think I might swoop one of these for the YZ250fx 🤙
Awesome compliment, I hope you get a chance to enjoy one as well! Have a good one dude!
Great info ! Thanks allot.
Very welcome, thanks for watching!
Ayyyye my boy uses a ZRT!!!!
Smart man
Great video. Have to see if i can get this for my 89 CR's
I'd say yes, even if there's a housing discrepancy. Can just swoop a new housing 💪Thanks for the compliment!
my Favorite Grips are the ProTaper Pillow Tops.....
Loving the Phoenix Grips myself 🙌
So true about the slop test and being a more confident rider. I can't wait to get one from you. I've been running the pro taper twister tube and it Just doesn't suit my fancy. Their is still resistance close to the housing.
Glad you found value in the vid!
@@mxrevival I find value in ALL your vids..!- 🙌🏼👍🏼
Blushing 😊
I definitely need one for my ktm
Tom's got you covered!
Definitely an awesome investment
Still going strong over here!
@@mxrevival brother. I've been thinking about you. . It's been rough my way. My ig got deleted. I'm going through legal issues with some lies my ex fiance is trying to spread. Hope all's well your way. God bless. I'll try to stay in touch when possible
@@Strickn9ne747 hey thanks for keeping in touch! I'll be hoping and wishing for the best for you. Just do the right thing whatever that may be. You will come out like a boss!
One life, you are in charge of the outcome!
Kill it!
For my OCD bar trimming I use a tube cuter. Plumbing section of your local hardware, Lowe’s or Home Depot.
It's a killer idea! Nice and straight. It isn't the best for the ZRT specifically though, unless you've got a pencil reamer too. Because of the cutters tendency to flair the inside of the bar to a slightly smaller I.D. - it can prohibit the ZRT's bearing insert from being installed into the bar end. Still, great feedback.
My new go to grip is the renthal diamond grip in the soft compound
Nice, I haven't tried those yet. I am in love with the Phoenix Handlebars 50/50 grips currently 😍
Lol you had to draw hair on your bike because you couldn't find the hole on a baldy lololol 😂😂😂
That is awesome. Gotta have it! Oh FYI, gray Sharpie works better on black bars....lol
I just run full diamond Renthals in soft. Kinda liking the Dual Compounds in half waffle. May try those next.
😂😂😂😂
Very good info, im thinking on getting one for my 350 sxf,, do you find that its soo easy to turn that it could cause easy whiskey throttle?
Very glad you found value in the video.
No, nothing crazy like that. Just very smooth and predictable, feels excellent in the hand. I've logged about 5 hours on it now and there's no way I can run a regular throttle again. Or at least, I will be putting these on all of my bikes from now on. These Renthal Kevlar grips are excellent as well.
Thanks for the comment 😎
@@mxrevival Ok cool,more helpful info,im on order with Tom ,cant wait to rip it! thnx man
Badass! Enjoy!
I added threads at the end of my bars for buckbusters. Can this be used with those threads, and if not, if the nylon thread is removed, would the threads in the tube itself cause issues with that expander?
Hi dude, can you send me an email when it's convenient for you? I'd like to get a better idea of your setup. If you use this link, I will reply and then you can send me some photos. www.mxrevival.com/contact
@@mxrevival Just sent.
Charles any idea if odi lock-on grips will fit over the zero resistance throttle tube?
I don’t believe that will work, because the ODI is a throttle tube as well as far as I know.
@@mxrevival thanks for the heads up. Definitely want to give one of those ball bearing throttle tubes a try. Nothing better than perfect buttery smooth controls. 🤙
So will the zrt fit on 1-1/8” bars?
Of course. The bars in the video are 1-1/8" too actually.
7/8" & 1-1/8" is referring to the clamp area diameter. All bars will have the same bar end diameter... (Think of how you can put any grip you want on any bike for example)
You're good to go 🙌
Two *ball* bearings. 😁
....that roll j/k 😁 #ProTip! Thanks 🤘
Would a flatter, wider style bearing that houses more of a "pin" type roller still be considered a ball bearing?
ok... but can we really trust a guy whos still riding suzuki :-)
Haha! Obviously! No hype, all moto. I even kick start my bikes like an OG 😅