Watching the perseverance and patience of a creative person despite successive failures during the process to reach the goal is very inspiring and instructive for me.❤
you need to edit the flow rate other wise it will assume that you are using a full filament when in reality there is a hole in the middle you also might need to adjust the tension put on the motor that feeds the filament that might fix the issues that you are having with needing to push it down most people run the flow rate at about 1.30 to 1.40 unless you've got it figured out in witch case congrats
I'm VERY grateful that I have seen your first video, I loved how you showed us all the steps & mistakes you have been through, I loved this project & my field of studies (Process engineering) includes all what is related to recycling SO I'm on my way to ADOPT this amazing project!, however I live in Algeria (Africa) where it's challenging to even find the pieces that I should buy, or to even find some people near that are good with electronics & all. So I would really appreciate if you share with us the links where you bought all what was necessary to build this MAGIC machine ❤ LET US SAVE THE NATURE !
Hi Jessie, I am so glad you were able to print. You came a long way as i remember getting in touch with you for your temperature problem. As an electronic engineer, i am quite amazed how well you did your project. If this would have been your end of the year project in college, your project would have a rating of 90% on the practical side of it. 2 minor issues stands out in your project. 1- all wires should be following a neat path and tie wrapped. 2 - I noticed 2 heating sensors, one not in use. As i said, you did a great job, Well done!
thank you soooooooo much. i wish i did something like this for my masters but instead i chose the privacy concerns related to amazon’s alexa and the end users
JESSIE YOU ARE KILLING ME WHEN I WATCH YOUR RASING BUTTERFLIES AND MOTHS VIDS STOP FEEDING THEM JUST OATS please RESEARCH WHAT THEY EAT AND GIVE THEM THE CORRECT HOST PLANT! but it’s all trial and 👹ERROR👹
It’s 😄 all 😄 trial 😄 and 😄 ERROR 👹👹👹
👹exactly👹
Watching the perseverance and patience of a creative person despite successive failures during the process to reach the goal is very inspiring and instructive for me.❤
All hail queen of turtles 🐢 🙌
YESSSSSSS THANK UUUUUU ILYSM
you need to edit the flow rate other wise it will assume that you are using a full filament when in reality there is a hole in the middle you also might need to adjust the tension put on the motor that feeds the filament that might fix the issues that you are having with needing to push it down most people run the flow rate at about 1.30 to 1.40 unless you've got it figured out in witch case congrats
unfortunately this still releases VOC's into the atmosphere, i'm trying to figure out a green way to catch those that's practical for me
this is so cool!!!! kudos to you for doing it so independently!!!❤️❤️❤️
thank you so much💚💚💚
I'm VERY grateful that I have seen your first video, I loved how you showed us all the steps & mistakes you have been through, I loved this project & my field of studies (Process engineering) includes all what is related to recycling SO I'm on my way to ADOPT this amazing project!, however I live in Algeria (Africa) where it's challenging to even find the pieces that I should buy, or to even find some people near that are good with electronics & all. So I would really appreciate if you share with us the links where you bought all what was necessary to build this MAGIC machine ❤
LET US SAVE THE NATURE !
thank you sooooooooo much
Good to see more woman joining PET1 Pultrusion! Thanks for being a mentor!
thank you, so glad i can represent all the queens out there 💚
You are an inspiration!!
awww that means the world to me. thank you so much💚
Hi Jessie, I am so glad you were able to print. You came a long way as i remember getting in touch with you for your temperature problem. As an electronic engineer, i am quite amazed how well you did your project. If this would have been your end of the year project in college, your project would have a rating of 90% on the practical side of it. 2 minor issues stands out in your project. 1- all wires should be following a neat path and tie wrapped. 2 - I noticed 2 heating sensors, one not in use. As i said, you did a great job, Well done!
thank you soooooooo much. i wish i did something like this for my masters but instead i chose the privacy concerns related to amazon’s alexa and the end users
Congrats Jessie! A great achievement actually!
thanks so much💚💚💚
Print a mini aquarium water bottle out of the water Bottle. Lil fishes will be letting out steam against the lil bottle
i love this idea!!!!!
that’s so cool!!!
i totally agree!💚
How about a little castle for the shrimp❤
YESSSSSSSS
Con🎉graduations, very impressed . 🎉🎉Well done
thank you smmmmm💚
I love how you post the failing too, that way we can learn with it
This is pretty awesome. I'm sure you'll be printing cool stuff with reused plastic soon
thank you so much
another banger 👍
print me a kool pot for my indoor avocados! 🪴
i would love to!
Print a hydroponics tower
Helo
25 second ago
love that idea!!!
@@growithjessie thanks for the heart! ❤
Well done
thank you💚
JESSIE YOU ARE KILLING ME WHEN I WATCH YOUR RASING BUTTERFLIES AND MOTHS VIDS STOP FEEDING THEM JUST OATS please RESEARCH WHAT THEY EAT AND GIVE THEM THE CORRECT HOST PLANT! but it’s all trial and 👹ERROR👹
HAHAHA ILY I PROMISE I WILL WITH THE NEXT CATERPILLAR
Ty
What is the cost of that printer you are using?
$450💚
Nice❤
thank you
1:20
Dullest knife in the world
I think it cuts through by friction 😂
HAHAHAH
Print a reusable water bottle.
LOLLLL
Y only 5 comments
bump itttttt
@@growithjessie hii
Fish string use 3d printer????
But I must say reduce is the first step lel
Wow, amazing/awesome video and content!!!!!!! Keep it up❤
thanks so much💚