RESTORATION OF OLD RUSTY BRUSH CUTTER | Restore japane 2-stroke Mower
Vložit
- čas přidán 22. 12. 2023
- RESTORATION OF OLD RUSTY BRUSH CUTTER | Restore japane 2-stroke Mower
Currently, we are building a channel to meet the increasing needs of viewers. so our channel will focus on building more engaging and entertaining video content.
_ I hope this is the perfect restoration video for you.
_I hope you find something useful and enjoy this movie! I am pleased with your feedback, advice and suggestions for improvement. !!! sorry for the mistake if i made this restoration !!! thank you !
#diy
#restoration
#Mower - Věda a technologie
Why is there always salt on these things in these channels? Why not restore an old tool, there's alot of them around. No need to smear dirt and salt water all over them to make them "rustier".
Покрасить бак это гениальное решения 😂 видно сколько осталось топливо😂😂😂
👍🤣🤣
Такое чуство что перепутали начало и конец видео
very nice my friend. greetings from Greece!
👍❤️❤️❤️
日本🇯🇵の田中の製品が大事にされているのに感動🎉しました。
又、サンドブラストや超音波式キャブクリーナー、それと振動による錆び取り機には驚かされました。
錆び取りの後は黒サビにする為の溶剤ですか？
教えてくださいませ😊
なぜかアクセルが左利きになってますね😅😮
惜しくば、エアークリーナー内のスポンジ🧽入れて欲しかったなぁ😂
それと、ギヤ⚙️ヘッド内のグリスアップもやったら良いですよ❤🎉😊
👍👍👍
Прямо как на Рублёвке,вещи валяются тут и там не кому не нужны 😅😅😅
I'm amazed all the working stuff just thrown away in so many videos
hard working will be successful, keep up good job!
Great job. Looks great.
Me encanta como lo restaura
Tanaka is the best snipper when it comes down to reliability
Có vụ máy mà bỏ vậy 😂😂😂
This is a very unique cutting machine, very small... What was once a rundown and dirty cutting machine, after being touched by the hands of a restoration expert, the results were very surprising... it looked like new again...
Thank bro 😍👍👍👍
No shit Sherlock 💀💀💀😂😂🤦🏻
Great job, on the restore!, now the brush cutter will have many,many more years of service 😁 instead of going to a landfill!
👍👍👍
Герметиком смазывать не надо было ну а так то хорошо я 5 лет их уже чиню
Great job,never saw a weedeater run on beer!!!!
Thank bro 😍❤️❤️❤️
Bonjour,
Très belle restauration fait de manière logique avec le matériel nécessaire pour réussir (sableuse, fontaine de nettoyage etc..)
En résumé très professionnel !
Cependant je revient sur certains points !
La peinture du réservoir en plastic cela ne va pas tenir à long terme. L'essence et ces additifs est très corrosif, la peinture va pelé !
Personnellement j'utilise de l'acide citrique 20g par litre d'eau, cela nettoie et élimine les dépôts et même blanchit le plastique en l'immersion pendant 24 heures.
Ensuite les durites qui sont à remplacé, au remontage on les voient poreuses. Elles se dégrade et les particules finiront pas encrasser le carburateur.
Pour finir le carburateur, si l'ultrason est le meilleur moyens pour le nettoyé en profondeur, il manque un démontage plus poussé et le remplacement des membranes n'étaient pas un luxe.
Au final votre rénovation est un succès et pour cela je vous dît bravo !👏👏👍👍
Tudo certo até começar a roçar sem óculos mas parabéns pela restauração
Gosto muito de ver este tipo de video so nao me conformo em ver tanto serviço pra montar e nao ser trocado rolamentos e nem a vela mas gosto muito esse tipo de serviços
Excelente restaurador de maquinas
Thank bro 😍
Brother, you are right, 🙂👍 only the last part was very funny. 😂😂
🤪🤣🤣
Вот это удивительная африка, из земли кусторезы вылезают
Nice work! greetings from Germany ❤
Thank you 👍
Show de bola
Great job on restoring the brush cutter it looks great well done
😍❤️❤️❤️
@@restorationt2
@@restorationt2
Te felicito por la creatividad del pincel con la manguera y la bomba para verter el combustible para limpiar las partes del motor!!!! Un gran saludo-
Bravissimo 👏 complimenti 👏👏👍
Thank bro 😍
Tank's Nice video
Good job
😊
ES MUY GRACIOSO EL ACTING DEL TIPO CAMINANDO POR AHI Y ENCONTRANDO ALGO PARA RESTAURAR
Vilket fantastiskt jobb du gjorde det är riktigt riktigt roligt att se människor som kan meka med allt och få igång de igen sådan folk som du skulle finnas i mitt hemland för många mekaniker i Sverige håller kvar sina maskiner 1 kanske 20 år sen skrota de jag antar att du är i från Thailand? Tack för denna videon med denna filmen 👍👏❤️
ohh look at that what i just so happened to find while i was just on a stroll😋
😍❤️❤️❤️
Protege tu rostro en todo momento no dudo de tu reparación sólo hay que estar protegiendo la vista
It was very beautiful, congratulations
😍😍😍
Restaurada roçadeira 😉
this is magnificent
If you didn’t leave it outside it would’ve been usable from the start,
Great restoration 😊
bon travail bonne vidéo
Aku suka
excelente trabajo lo felicito desde chile
Thank bro 😍😍
Resting oldju
Junk ❤
Nice job.I like your part’s cleaning station,clever idea !
Good restoration, but I'm surprised that the carburettor was not stripped and jets cleaned. In use, the blade speed seems very slow (it might be due to the camera frame rate) and seems to slow even more when cutting. Perhaps check that the clutch is gripping properly.
Partly due to the aspect ratio, along with the fact that the grass is very soft, I run at low speed to save fuel.👍👍👍
wead wacker carburetors dont really have removable jets bro its all diaphrams and he did strip it and clean it and replace the diaphrams its not like a dirtbike carb
Молодец мужик работает дома не сидит
At least he found the most reliable brush cuter ever
Honda all the way mate
Le tiene que cambiar el embriage.
Well done my friend, from, Bayamo, Cuba
Hi. Do you speak Spanish?
Да нет это ерунда какая-то 25- 30 кубиков петрушку только стричь в огороде А тут ещё такая мотыга приделана тяжелая под 2.5 кг и движок не может нормально тянуть эту кочергу.если катушку поставить и намотать леску 4 мм он будет захлебываться😂
Should have at least put crank seals init
Awesome job
Thank you verymuch 😍
@@restorationt2 your welcome
просто, когда он взял его в руки,понятно что этот человек работать не умеет.
Great job my friend, keep it up 👍👍
👍👍👍
be carefull, you might fly away with full throttle
Super jest to odrestaurowane ta stara i zabytkowa kosa spalinowa pozdrawiam Mile i serdecznie 👍👍👍👍
Thank bro ❤️❤️
I hope that pain holds up on the plastic paint
Great video bro. I'm a big proponant for having the right tools for the right job and man, you have a fantastic set up. Everything in the right place to get the job done right the first time. Really great video to watch, thanks!
Não botou nem uma espuma como filtro de ar do carburador?
nem sei quem e jon lenu
Aw🎉😮
Muito bom mesmo gostei 👏👏🇧🇷👍
THANK YOU 🥰
i need a starter for this model
can you send me one ?
Is useful to power wash the it before you take it apart
I also repair computers. I see you did very well. Thank you for your hard work. congratulations for such great intelligence and effort,👍👍👍🙏
very good video
Thank you 👍
What's the problem with a brush cutter that produces a nearly unseen spark or sometimes it spark and sometimes not?
Nhìn là biết dân không chuyên rồi lắp còn lỗi quá nhiều 😂😂
Alguien me puede explicar cómo es que el penetrante( WD40) floja los tornillos sin llegar a la rosca del tornillo?😅
tu no ves que baje, pero cuando le colocas en la cabeza al tornillo o en los laterales, en fluido va bajando poco a poco hasta llegar al final de la rosca.
Малыш,❤❤❤рада видеть тебя.
Thank you 😍
Good job
❤️❤️😍😍
Prvo propadne pumpica i crijeva za benzin ,Membrane su tvrde,lijepo uradjeno ali je laz da je slucajno pronadjen.
Muito bom
love your work, but where did u buy that spanner ....?
あんな所に放置してあるの有り得ない態とらしい動画
I guess they just throw their trash anywhere they want to. lol
Nice drama..😂😂
Great job 👍🏽 well done 💯✅
I have a question 🤔 What's that light 🔵 blue colour liquid 22:22
👍👍
Tell me what's that liquid
Salve a te ragazzo prodigio sei molto bravo nello smontaggio e assemblaggio, una cosa chiedo che polvere è quella in acqua? Ciao alla prossima. Saluti dal nord Salento Puglia (ITA) 😳😁😉✌️
Thank bro 👍👍👍
aqui e brasil💪
👍👍
He knew exactly where to go and where he was, this is a fake for likes gentlemen 😅😅😅😅
Verdade 😂😂😂😂kkk
Why paint the tank when the paint is going to come off
А как может заржаветь алюминий, пластик и резина?😂
Ну если ее обоссать то все может быть 😂
У них и сапоги будут ржаветь 😂
@@Denis-93 это точно 😂
она не ржавая,а в г о вне)))))))))
на 09:22 поршень новый у "старого" тримера🤣
De ley amigo ybale que sos con la guadaña capo de como nuevo quedo amigo
Thank you bro 👍👍
Thank you, you are doing great job. I want to know how much for Japanese 2-stroke bush cutter machine?
Thank you, I will keep it as a souvenir 😍👌👌
Que es el líquido azul que usas en los tornillos?
Colorant for snails 👍
9iiii❤
И на Али экспресс 😂😂😂
жаль что ето постанова
Top brazil
😍🎉👍👍
Pense em mentiroso 😂
Одно понять не могу там на поршне кольцо было сломано он просто одел новое а цилиндру то кранты задир будет он чисто для контента это делает Сам положил эту косилку на камеру сам и достал И на говно краской покрасил лучше ничего не делал бы
А чем задиры могут помешать ? Масло есть будет ? 😂
No se parece falso rik 😂😂😂
👍👍
TNK 356
Le renvoi d'angle doit être mort 😂
,👌
😍😍
Ущільнювачі колінчастого валу не замінив.
Air filter: yes 😂😂😂🤦🏻🤦🏻🤦🏻🤦🏻
You don’t know nothing 😂
Me lo regali
👏👏👏👏👏👏💯💯💯💯💯👍👌🇧🇷🇧🇷
😍😍👌👌