Tin man. I know this video is 5years old but. What are your thoughts on Airmaxx bags and equipment for a first build?? Love the videos. And I love going back to the archives!
Hey, the airmaxxx stuff is decent for the money. If you're on a budget and it's all you can afford, there is nothing wrong with their stuff. It's just not as quality as the more expensive stuff. I run lots of airmaxxx stuff on budget builds
Sprung my truck when I rebuilt all the suspension. Like to bag it at some point... laying frame looks so good ! We get tons of rain though and seeing as this is my daily I wonder if it might be more headache that its worth. The loss of the inner fenders alone makes me shudder thinking of all that water flying wherever it likes.
I like your channel and subscribed today. I installed some slam 6s today but in full droop it looks like the bag is coming apart at the top. Is there anyway I can send you a picture of the bag and you tell me if it is normal?
Great video thanks. I need help with a small diameter bag and can't find anything. I'm doing a golf cart so they don't need to be super strong. Can you help in any way?
Great informative video, Question hope you can guide me in the right direction... Which bags would you suggest I get for a 1965 Impala Station wagon ? Thank you very much
There are many great options for load support/towing. I would recommend you reach out to air lift. They are the company I use for load support bags on all of my trucks.
I have a two inch hole at the top where the bolt goes with nothing to bolt to. Is there a gusset or metal piece with a hole that I can use to make the upper cup hold tight to the shock tower?
Thanks for the video. One question, how do you pick stroke length? If I am trying to get near stock ride height would I just measure the original spring height? Or do I measure the suspension maxed out say on a lift with axles dropped? Looking to put air ride under my 78 F250 which has more of a high boy look. As far as weight capacity goes, does a higher capacity air bag ride worse/better? I dont plan to tow but may want to to pick up a car on a trailer. Thanks!
Some of these airlift kits come with thick brackets. For example the ones for the 2018 accord in the rear. Could they be trimmed a little to lay a little harder?
I was just doing some air bag maintenance on my toyota pickup today, i got ss RE6 in the front(not a lot of room in the front of mini trucks for bags and the slams dont balloon) and airlift 2600 in the rear, its bag on axle so the ride isnt the best but i might add lift bars one day or just redo the setup, I mean i have ridden in both and yes bag on bar is noticeably better but its still better than leaf springs i think.
EvanThaG oh yeah there is a ton more to discuss with bag stuff. This was just a quickie lol if setup proper a bag over axle can be very nice. The last truck I built, bag on axle, rode better than any other vehicle I've ever built. Bag on bar included. Not sure if I'm getting better at it or was just lucky lol the slam non ballooning is a nice feature, but really the airlift ones don't bag very much. For the price I'd always choose the airlift bags. But the slam ones have their place too!! All the others on the market.... Well.... You won't see me running them lol
I have heard success with vixen bags but i am going to keep running airlift and slams lol. Airbagit bags are garbage, my dad got 4 of the denominators you talked about for like 114$, they leak a decent amount and dont lift much, he also ordered fitting and got 2 correct fitting and the other 2 where 2 different sizes, we called and when they do answer you dont get much help, some things like bag brackets and my uncle has been buying their hidden hitches for years, but stay away from the bags and fittings... I only buy from horn blasters, AVS, or thorbros now.
My truck has been bagged almost 20 years now 4 years ago we ditched the old bag over axle and horrible aluminum 4 link we made from speedway and did bag on bar with a wishbone on top. The ride is a thousand times better it’s almost all we do anymore out of our play shop but I would love to try a cantilever setup sometime
Maybe this is weird, i'll let you decide, but I'm trying to find someone who has brackets that are taller than what is normally sold. I have a 64 Impala and all the bracket cups I see are about the same overall height, and I'm sure most people like to be able to slam their car on the ground. In my case, this is NOT what I want to do. When my bags are totally deflated and im riding on the bumpstop, I still want my car to be an inch off the ground at least. I know it looks cool to have your underbody and exhaust touching the ground, but beyond looking cool it serves me no purpose, and incase of an emergency in which my bags lose all pressure, I want to be able to still drive my car a short distance to safety. Does anyone know where I can get brackets like im talking about??
Mr Tinman, I've watched this video several times. One question I have, does the tall cup go on the top and work better with the bag lower to the lower control arm for a specific reason?
Great video first of all. I'm bagging a 64 cadillac and am using dominator 2600 bags, 3 out of 4 of them leaked and after getting warranted replacements one of those leak also. So I am thinking about trying the slam 7. Was curious about ride quality between the 2 and is the stroke comparable. Dont want to sacrifice ride height. Thanks
They are virtually identical in specs. Ive installed probably close to 100 airlift bags and never once had one leak. So I would actually recommend changing your fitting and/or line. You're spending unnecessary money and time replacing the bag
I have a 81 camaro and was going to put ACDelco 519-36 Specialty Front Spring Assisted Shock Absorber in the front, So my question is im looking to have the camaro have a switch for race mode option what is the best air ride do you thing i need in the back?
My 97 Dodge Ram is lowered 3 in the front and 4 in back. I’d like to bag it in the spring. It’s currently sitting on 22s. Will I need different rims if I get bags for it?
I’ve got a Mitsubishi diamanté 1993. It comes with factory air. Can I fit after market bags to make it lower? I have a set of Tein coilovers. Can I get bag to go over he coilovers to replace the springs? What do you recommend? Thanks.
Question, what fittings do you use for the dominator i bought 1/2 npt and they only go in half way and stick out to high as a matter of fact they even stick out on my tank, are they supposed to go flush?
No they do not go flush. It's a tapered thread, so the deepness depends on the taper off the fittings and the bags. Pipe tape and go until it's tight with a wrench.
Needs more air volume. But will give you a softer ride with less pressure. There really are no negative consequences of fitting an oversized bag. Sort of like asking if more cushion in a car accident is a bad thing lol always better to have more/bigger if you can.
Great informative video! I have bags on my 2007 Chrysler 300C 5.7L V8! The rear bags which are similar to those in your video seem to roll over on themselves quite noticeably! They do the job, meaning they go up & down but they just don't look right! What would be making these bags do this??? Any assistance is greatly appreciated!
@@Tinman2Kustoms maybe I didn't quite explain it properly! When pump up to max height the bags aren't straight, they lean over onto themselves! Kind of looks like when you stretch & bend an accordion! They should inflate straight up & down but mine look to leaning towards the centre of the vehicle when inflated!
@@aarondwyer8341 that's totally normal. Especially on independent suspension. Manufacturers recommend that they collapse straight. But they don't have to expand straight. Sometimes with geometry it's impossible to expand straight.
Thanks for reply! I suspected this was the case as the system was installed by a highly reputable shop! It just doesn't look right to me, but admittedly I'm no expert! My concern is, does/will this affect the durability & lifespan of the bag? As I said I'm no expert but would an offset plate at the lower mounting point eliminate this & do you know if there is such an item available? Again thank you for taking time to respond to my issue, fully appreciated!!!
@@aarondwyer8341 they are designed to take that side force. They're incredibly strong at the seam. Atleast the airlift & slam specialties bags are. They will last 10+ years without any issue. And if you offset the bags, they won't collapse straight. Which is actually harder on the airbag because when they're collapsed they will rub on the wrong parts of the bag and rub through. Always want them collapsed straight and canted when aired up.
Yes. You want your airbags to be perfectly flat when deflated in the relaxed position. They will naturally bend and twist a little with suspension movements. That's normal. But obviously the less the better. They're built for some though.
Good vid bro. But my question is which bag is good for a 64 impala. And if you wanted to get the vehicle to stand tall on all 4’s ( where you can see the rear axle and all) what would be a good bag.
Airlift or slam specialties. But I'll mention if you go 2 air compressors fir example on my Silverado I have an 8 gallon tank for my rears which are slam specialties, now fro the front I have a 12 gallon tank with the airlift 2600's with avs 1/2 inch valves and I can hop my front . And dual viair 480's to the 8 gallon tank and dual viair 485C's to the 12 gallon tank...
Getting ready to bag my 67 C10 which has a 85 front end under it. Was thinking Firestone 2500 in the front and Firestone 2600 in the back just for clearance. Or do you think the 2600's will be okay in the front?
Kevin Hornbuckle yes they do!! I could have touched more on the specifics., But most of that info can be found online and wanted to keep this video short-ish
Hey bud I had a question. I'm currently replacing my old 7" Slam bags and was considering switching to the Dominator bags. Problem is my truck is in storage a few hundred miles away, so I do not have the ability to get to it to measure first hand. The slams being "non-balooning", will the Dominators fit without rubbing in an application that was meant for the slam bags, or do they balloon out a lot???
I've never seen an application where the dominators won't work in place of the slams. Could be possible thoreticsllt, but the ballooning is minimal with the dominators.
You can use standard Teflon pipe tape, or I prefer to use a liquid sealer with Teflon, like ARP's thread sealer or something you can get at a hardware store. But not the loctite brand stuff. You want something that has Teflon in it.
So my 63 impala is really bouncy in the front , he sent me firestone air bags and monroe shocks.. air lift bags rear. Should I get the ss7 bags for the front and maybe better shocks?
That's far too generic of a question. There are hundreds of different combinations of parts that any one single truck could use. Then you throw in all of the different makes and models of trucks. Literally thousands of combinations of parts.
@@crisgonzalez6788 best is a matter of opinion and the use you have planned for the vehicle. I'd recommend you get ahold of airlift performance and see what they can do for you
Where are you located trying to find someone to help with my bagged install I'm trying to do a 2006 Dodge Ram single cab I have a kit from bcfab and full rear Notch kit from ekstensive Metal Works
I'm sure someone makes a kit! If you want to lay out all the way, you won't be able to get a kit for that though. Just bagged and about 6" lower I'm sure someone makes a kit.
@@Tinman2Kustoms I see a kit by EZ air but there are few reviews on it. I don't really need it to lay all the way out just ride low and sit lower. Just something so I can raise it up and not drag everywhere like I do now with just lowering springs.
I already have an air ride on my 96 impala I want to switch out to a better bag in the front because it’s hard to describe but the air bags in front there now bent outwards if that makes any sense and it rubs on the sway bar links I think it has cheap airbags I had lifted at a shop in San Antonio what do you recommend on airbags just to swap them out
Is there any drawback to the sleeve style bags? I'm planning a rod build and I want full fenders so that doesn't leave a lot of width room for the double convoluted bags as far as I can tell
I have a 67 cad and want to bag it..i already have a tank (endo cvt) need bags, fittings, lines, etc what would you recommend? Im looking for a comfortable ride
You could do either. It's preference. The 2500 is easier to work with because it's smaller. But the 2600 is a stronger bag so it will take less air pressure to lift the front of the vehicle, which will give you a softer ride. Either will work. The 2500 would be my recommendation if you're not sure.
“More cushion for the pushin”...Your videos kick butt man. Thanks for sharing!
‘More cushion for the pushin” 🤣 😂
One thing I like about you and your utube videos you give part numbers when ask other questions on parts they say go back to the video thks again
"more cushion for the pushin, like a fat chick" got you another sub ,LMAO ! im dead rn! LOL
Can I get this in Boise Idaho?
208 514 6787
Tin man. I know this video is 5years old but. What are your thoughts on Airmaxx bags and equipment for a first build?? Love the videos. And I love going back to the archives!
Hey, the airmaxxx stuff is decent for the money. If you're on a budget and it's all you can afford, there is nothing wrong with their stuff. It's just not as quality as the more expensive stuff. I run lots of airmaxxx stuff on budget builds
Just pay that extra money and buy slam bags
Iam doing slam bags on my 62 impala and laying the frame on my 48 fleetline on a 4 link c notch
Good vid and info. Thanks . Planning on making my '56 Buick lay frame
Ebay is just a buy website is not a part brand. Summit racing, lmc truck, jeggs and other big companies sells in ebay
Yeah? I never said eBay was a brand.... Saying "eBay bags" is a way of saying cheap no-nams bags.
I gotta add air bags on our cargo trailer as we haul fruit to the farmers market and don't need bruising. Thanks for the info.
The only thing I’m concerned about is your voice not matching your face 😂
Lmao oops
Sprung my truck when I rebuilt all the suspension. Like to bag it at some point... laying frame looks so good ! We get tons of rain though and seeing as this is my daily I wonder if it might be more headache that its worth. The loss of the inner fenders alone makes me shudder thinking of all that water flying wherever it likes.
TheCanadianBubba lol well it's only a loss of inner fenders if you're lazy. There is always a way to make new inner fenders of some sort.
Thanks for word, had not researched at all yet... want a posi and disc's out back first : ]
TheCanadianBubba eh, rear disc brakes are overrated. Posi Is worth it though!!
Best air bag video on the net for info
Thx man
Can you do a Bello bag video
I like your channel and subscribed today. I installed some slam 6s today but in full droop it looks like the bag is coming apart at the top. Is there anyway I can send you a picture of the bag and you tell me if it is normal?
Great video thanks. I need help with a small diameter bag and can't find anything. I'm doing a golf cart so they don't need to be super strong. Can you help in any way?
Great informative video, Question hope you can guide me in the right direction... Which bags would you suggest I get for a 1965 Impala Station wagon ? Thank you very much
How would these be for air lift in a Escalade for towing for replacement of the rear springs
There are many great options for load support/towing. I would recommend you reach out to air lift. They are the company I use for load support bags on all of my trucks.
How wide are those smaller bags?
I have a two inch hole at the top where the bolt goes with nothing to bolt to. Is there a gusset or metal piece with a hole that I can use to make the upper cup hold tight to the shock tower?
Hey i have honda odyssey exl 2008 do you recomend some air bag and brakets for this van tank great videos
Thanks for the video. One question, how do you pick stroke length? If I am trying to get near stock ride height would I just measure the original spring height? Or do I measure the suspension maxed out say on a lift with axles dropped?
Looking to put air ride under my 78 F250 which has more of a high boy look.
As far as weight capacity goes, does a higher capacity air bag ride worse/better? I dont plan to tow but may want to to pick up a car on a trailer. Thanks!
Nice video !
I'll be watching you
Some of these airlift kits come with thick brackets. For example the ones for the 2018 accord in the rear. Could they be trimmed a little to lay a little harder?
I was just doing some air bag maintenance on my toyota pickup today, i got ss RE6 in the front(not a lot of room in the front of mini trucks for bags and the slams dont balloon) and airlift 2600 in the rear, its bag on axle so the ride isnt the best but i might add lift bars one day or just redo the setup, I mean i have ridden in both and yes bag on bar is noticeably better but its still better than leaf springs i think.
EvanThaG oh yeah there is a ton more to discuss with bag stuff. This was just a quickie lol if setup proper a bag over axle can be very nice. The last truck I built, bag on axle, rode better than any other vehicle I've ever built. Bag on bar included. Not sure if I'm getting better at it or was just lucky lol the slam non ballooning is a nice feature, but really the airlift ones don't bag very much. For the price I'd always choose the airlift bags. But the slam ones have their place too!! All the others on the market.... Well.... You won't see me running them lol
I have heard success with vixen bags but i am going to keep running airlift and slams lol. Airbagit bags are garbage, my dad got 4 of the denominators you talked about for like 114$, they leak a decent amount and dont lift much, he also ordered fitting and got 2 correct fitting and the other 2 where 2 different sizes, we called and when they do answer you dont get much help, some things like bag brackets and my uncle has been buying their hidden hitches for years, but stay away from the bags and fittings... I only buy from horn blasters, AVS, or thorbros now.
My truck has been bagged almost 20 years now 4 years ago we ditched the old bag over axle and horrible aluminum 4 link we made from speedway and did bag on bar with a wishbone on top. The ride is a thousand times better it’s almost all we do anymore out of our play shop but I would love to try a cantilever setup sometime
Maybe this is weird, i'll let you decide, but I'm trying to find someone who has brackets that are taller than what is normally sold. I have a 64 Impala and all the bracket cups I see are about the same overall height, and I'm sure most people like to be able to slam their car on the ground. In my case, this is NOT what I want to do. When my bags are totally deflated and im riding on the bumpstop, I still want my car to be an inch off the ground at least. I know it looks cool to have your underbody and exhaust touching the ground, but beyond looking cool it serves me no purpose, and incase of an emergency in which my bags lose all pressure, I want to be able to still drive my car a short distance to safety.
Does anyone know where I can get brackets like im talking about??
Great video as always man any new projects on the way
jcricket 1710 just the 40 Chevy I've been working on for Mom! That's full time for the next 4-5 months
Suggestions on my 95 Buick Roadmaster saden
Mr Tinman, I've watched this video several times. One question I have, does the tall cup go on the top and work better with the bag lower to the lower control arm for a specific reason?
Great video first of all. I'm bagging a 64 cadillac and am using dominator 2600 bags, 3 out of 4 of them leaked and after getting warranted replacements one of those leak also. So I am thinking about trying the slam 7. Was curious about ride quality between the 2 and is the stroke comparable. Dont want to sacrifice ride height. Thanks
They are virtually identical in specs. Ive installed probably close to 100 airlift bags and never once had one leak. So I would actually recommend changing your fitting and/or line. You're spending unnecessary money and time replacing the bag
@@Tinman2Kustoms
Thanks for the response. The bags are actually leaking from right around the crimp seal at the bottom of the bag
I have a 81 camaro and was going to put ACDelco 519-36 Specialty Front Spring Assisted Shock Absorber in the front, So my question is im looking to have the camaro have a switch for race mode option what is the best air ride do you thing i need in the back?
My 97 Dodge Ram is lowered 3 in the front and 4 in back. I’d like to bag it in the spring. It’s currently sitting on 22s. Will I need different rims if I get bags for it?
I’ve got a Mitsubishi diamanté 1993. It comes with factory air. Can I fit after market bags to make it lower?
I have a set of Tein coilovers. Can I get bag to go over he coilovers to replace the springs?
What do you recommend?
Thanks.
what do you recommend for 62 c10 rear? pulling a vintage trailer 1800lbs
Awesome.
Hello i have a 1995 Chevy Caprice i Am Looking To Bag The Front. I saw some ebay bags for 180-240$ for the pair do you recommend?
Question, what fittings do you use for the dominator i bought 1/2 npt and they only go in half way and stick out to high as a matter of fact they even stick out on my tank, are they supposed to go flush?
No they do not go flush. It's a tapered thread, so the deepness depends on the taper off the fittings and the bags. Pipe tape and go until it's tight with a wrench.
Thanks again for your help
Do you Know The bags size of Mazda rx-8 (2006)?
What do you recommend for 81 vette...
Where are you located at I have a lowered 86 square body
Minnesota. I accept customer vehicles from anywhere in the US or Canada
What is the downside to using a huge 10" + bag , where clearance is NOT an issue? On a light weight car...
Needs more air volume. But will give you a softer ride with less pressure. There really are no negative consequences of fitting an oversized bag. Sort of like asking if more cushion in a car accident is a bad thing lol always better to have more/bigger if you can.
@@Tinman2Kustoms Thanks!
Thsnks for the video. Please I want to bag my Chev Corsa Wind front and rear tell me the reference of bags and hardware that I need. Thanks.
It's not that easy lol you'll have to build a setup from scratch for that, I'd bet.
I have a 54 Chevy pickup on a 2000 S 10 Chevy chassis frame. Will those bags work if I wanted to slam it?
Any bag will work. It's the work around the rest of the suspension that makes the "slam" possible.
Great informative video!
I have bags on my 2007 Chrysler 300C 5.7L V8! The rear bags which are similar to those in your video seem to roll over on themselves quite noticeably! They do the job, meaning they go up & down but they just don't look right!
What would be making these bags do this??? Any assistance is greatly appreciated!
They should collapse onto themselves and collapse to about 3" total height.. As long as they collapse straight, that's what they're designed to do
@@Tinman2Kustoms maybe I didn't quite explain it properly!
When pump up to max height the bags aren't straight, they lean over onto themselves! Kind of looks like when you stretch & bend an accordion! They should inflate straight up & down but mine look to leaning towards the centre of the vehicle when inflated!
@@aarondwyer8341 that's totally normal. Especially on independent suspension. Manufacturers recommend that they collapse straight. But they don't have to expand straight. Sometimes with geometry it's impossible to expand straight.
Thanks for reply!
I suspected this was the case as the system was installed by a highly reputable shop! It just doesn't look right to me, but admittedly I'm no expert!
My concern is, does/will this affect the durability & lifespan of the bag?
As I said I'm no expert but would an offset plate at the lower mounting point eliminate this & do you know if there is such an item available?
Again thank you for taking time to respond to my issue, fully appreciated!!!
@@aarondwyer8341 they are designed to take that side force. They're incredibly strong at the seam. Atleast the airlift & slam specialties bags are. They will last 10+ years without any issue. And if you offset the bags, they won't collapse straight. Which is actually harder on the airbag because when they're collapsed they will rub on the wrong parts of the bag and rub through. Always want them collapsed straight and canted when aired up.
Hi! What do you think, which one will have more comfortable, smoothest ride in equal conditions, ss6 or D2500?
Would be similar. I would lean towards the d2500 because of lower costs and a slightly larger volume.
@@Tinman2Kustoms thanks for answered. I heard that d2500 have 7” max dia, SS6 have 6” normal, and 6” max dia. You dont tell about it. Does it true?
@@user-uu7sm8vq7b yes that's true
How much can an air bag twist and bend?? Like i mean if its not straight up and down. Can it inflate and deflate even if the back is not straight
Yes. You want your airbags to be perfectly flat when deflated in the relaxed position. They will naturally bend and twist a little with suspension movements. That's normal. But obviously the less the better. They're built for some though.
Do you have any tipps for bagging a geo tracker
Hydraulics lol hop it
Good vid bro. But my question is which bag is good for a 64 impala. And if you wanted to get the vehicle to stand tall on all 4’s ( where you can see the rear axle and all) what would be a good bag.
Airlift or slam specialties. But I'll mention if you go 2 air compressors fir example on my Silverado I have an 8 gallon tank for my rears which are slam specialties, now fro the front I have a 12 gallon tank with the airlift 2600's with avs 1/2 inch valves and I can hop my front . And dual viair 480's to the 8 gallon tank and dual viair 485C's to the 12 gallon tank...
I would run ss7 air bags all the way around HE DIDN'T EVEN MENTION THE KEY POINT SLAM BAGS DO NOT EXPAND LIKE OTHER BAG COMPANIES SS FOR THE WIN!!!
Getting ready to bag my 67 C10 which has a 85 front end under it. Was thinking Firestone 2500 in the front and Firestone 2600 in the back just for clearance. Or do you think the 2600's will be okay in the front?
I'm putting 2600 in the front and 2500 in the back
Im building a 86 c 10 bought the bag plate kit for the front does the cup weld in on the bottom or does it just sit in like a spring
Just sits in the pocket
Do these have internal bump stops?
Kevin Hornbuckle yes they do!! I could have touched more on the specifics., But most of that info can be found online and wanted to keep this video short-ish
Thanks for the video. It is nonetheless informative.
Hey bud I had a question. I'm currently replacing my old 7" Slam bags and was considering switching to the Dominator bags. Problem is my truck is in storage a few hundred miles away, so I do not have the ability to get to it to measure first hand. The slams being "non-balooning", will the Dominators fit without rubbing in an application that was meant for the slam bags, or do they balloon out a lot???
I've never seen an application where the dominators won't work in place of the slams. Could be possible thoreticsllt, but the ballooning is minimal with the dominators.
@@Tinman2Kustoms Right on! Thanks a lot for the info! I wasn't crazy about the ride on my slams so I may give the dominator a try for the price.
What kind of thread sealer do you recommend for the fittings on the airbags so they don’t leak air
You can use standard Teflon pipe tape, or I prefer to use a liquid sealer with Teflon, like ARP's thread sealer or something you can get at a hardware store. But not the loctite brand stuff. You want something that has Teflon in it.
So my 63 impala is really bouncy in the front , he sent me firestone air bags and monroe shocks.. air lift bags rear. Should I get the ss7 bags for the front and maybe better shocks?
Yes better shocks
@@Tinman2Kustoms so the ss7 bags wouldn't necessarily be less bouncy/ floaty than the firestone?
@@PeachCoastLowrider most likely not enough to make a noticable difference. Shocks are the bounce controllers
Hi i hav car named maruti ignis which air bag size shd i go for plz suggest
Never heard of it
Nice!
Where are you located?? I would love to have you do work on my truck.
An hour north of Minneapolis MN. Message me on Facebook or Instagram if you'd like to talk. Tinman 2 Kustoms
Hello what do you need to buy to add airbags to your truck?
That's far too generic of a question. There are hundreds of different combinations of parts that any one single truck could use. Then you throw in all of the different makes and models of trucks. Literally thousands of combinations of parts.
@@Tinman2Kustoms well I think I will look for the best airbags out there but thanks
@@crisgonzalez6788 best is a matter of opinion and the use you have planned for the vehicle. I'd recommend you get ahold of airlift performance and see what they can do for you
@@Tinman2Kustoms ill try it but thanks for your help I really appreciate it
Where are you located trying to find someone to help with my bagged install I'm trying to do a 2006 Dodge Ram single cab I have a kit from bcfab and full rear Notch kit from ekstensive Metal Works
I'm in central minnesota. I have had people ship me projects for builds too
Holy shit. Lol. I was expecting a 15 year old kid by the voice. Then you turn the cam and look 40 haha
Lol I'm 27. But yeah, sound young
I am enjoying the idea of doing bags on my 56 chevy p/u.
I dont care about the voice. All I care is about the brain behind it.
I want to bag my 95 impala ss . What would you recommend? Is there a good kit?
I'm sure someone makes a kit! If you want to lay out all the way, you won't be able to get a kit for that though. Just bagged and about 6" lower I'm sure someone makes a kit.
@@Tinman2Kustoms I see a kit by EZ air but there are few reviews on it. I don't really need it to lay all the way out just ride low and sit lower. Just something so I can raise it up and not drag everywhere like I do now with just lowering springs.
@@heavilyarmed556 ya get what ya pay for. A basic kit is fine. Just might not have all the luxuries that an expensive kit would have.
I already have an air ride on my 96 impala I want to switch out to a better bag in the front because it’s hard to describe but the air bags in front there now bent outwards if that makes any sense and it rubs on the sway bar links I think it has cheap airbags I had lifted at a shop in San Antonio what do you recommend on airbags just to swap them out
What about ballooning I know the slam bags dont what about the air lifts
I need two air bags for my bus let's get in touch please
Is there any drawback to the sleeve style bags? I'm planning a rod build and I want full fenders so that doesn't leave a lot of width room for the double convoluted bags as far as I can tell
sleeve bags don't lift nearly as far. But for some applications they work okay
I have a 67 cad and want to bag it..i already have a tank (endo cvt) need bags, fittings, lines, etc what would you recommend? Im looking for a comfortable ride
The bigger the bag the better the ride because it takes less pressure to lift the same amount
So i want to run air lift dominators on the front of my 65 chevy c10 which size do you recommend, they will be on the stock a arms the d2500 or d2600
You could do either. It's preference. The 2500 is easier to work with because it's smaller. But the 2600 is a stronger bag so it will take less air pressure to lift the front of the vehicle, which will give you a softer ride. Either will work. The 2500 would be my recommendation if you're not sure.
Q: What gets easier to pick up the heavier it gets?
A: Women
"More cushin' for the pushin'!"
Steimie Snerdly hahahaha yes that's awesome
Nice masks !
Hi guys donu recommend mentioned here bc fab @ on ebay thank you please respond with their feedback