Cool Tools | Introduction to Foldforming by Robert Dancik
Vložit
- čas přidán 1. 04. 2019
- If you are interested in the products used in this video, please click this link: cooltools.us/collections/intr...
In this video, Robert shows us the technique of Foldforming. Foldforming is considered the only new technique in metalworking, developed by Charles Lewton-Brain in the 1980s. Foldforming allows the artist to turn sheet metal into wonderful 3-Dimensional shapes and textures, without any soldering. This technique has endless possibilities! - Jak na to + styl
COOL TOOLS listened to my complaint and has removed the ads from the main body of the video. I really appreciate that you listened to my complaints. Can't wait to watch more of your tutorials.
I’ve been working with multimedia art and watched over thousands of tutorials for around 7 years now , I must say your tutorials are so detailed and comprehensive like no other thing I’ve ever seen ,it comes from your passion straight from the heart , thank you a million times for sharing knowledge , god bless your heart and soul ❤
Every phrase has a lifelong experience wrapped in it, and it shows. Thank you
Thank you, Robert! I appreciate that you not only showed us the how, but also clearly explained the why.
You are an excellent teacher! Thank you. I’ve been collecting “materials” but haven’t started working at making metal jewelry yet. I’m excited to get started now!
This is a really informative video. I have seen these effects before but had wondered how it was done. I really enjoy mixing up my media and this gives me so many ideas. Thanks for sharing with us.
What a wonderful tutor this chap is! Learning so much.
Now this was a crystal clear explanation of how to work with copper sheets and the right tools. Very nice to watch.
Wow I'm glad that I've seen this. I can see this technique working in one of my designs for my college project.
Great information and presented so nicely as all your others. Always looking forward to watching all you do! Thank you so much!!
I have an 8x10 sheet of copper I was wondering how to use, what a timely video. Looking forward to exploring your site. I have been making beaded jewelry for ages and the connectors and embellishments are so costly! I would like to try resin in the deeper folds too. Thanks so much! I have subscribed, clicked and rung the bell!
Thank you so much for all!!! You teach in the best way!
Excellent demonstrations. Thank you.
I am in my 60's and I remember as a child of 10 years old going to Flea Markets where my Mother was absorbed into the Antiques they had for sale, my childhood home resembled a Museum filled with very old furniture and we were very careful in touching it as my mother was very protective of her vast collection, she had a house cleaner French Polishing all the pieces one by one until you could see your face in it, even our TV and VCR was carefully hidden so it was not visible to the untrained eye. There were old ladies selling jewelry exactly like that you are doing right there which I today recognize as the jewelry the "Flower People/Free Love" LOL! wore. My mother called it rubbish because it probably was way to Modern/Contemporary for her taste. The old ladies all had flower dresses on and they smelled like Cigarettes (To me, at 10 somebody in their 20's was old) But yes, exactly like that, and loads of wind chimes and the whole Flea Market smelled like incense or cannabis I would not have known the difference. Just for context, I am South African but my parents was also 100% against the Vietnam War and were very vocal about it while we had House Maids, Laundry Maids, Gardeners and my sister and I had a Nanny all while we were conducting War against pretty much any body who dared to stand up against us, which has not changed after the end of Apartheid. But considering that 25 million people are employed in these kinds of jobs today, it is unimaginable what will happen to these people should they loose their jobs as you might know.
Great video. I really like Robert’s presentation style. He’s so enthusiastic! And I love seeing the samples of finished or near finished pieces. Gives me lots of ideas. Thanks!
Great video and so well explained with lots of detailed information. Thanks for sharing.
Very interesting and informative tutorial, Thank you Robert
Fantastic. Came away with more choices
So very cool! The quality of your impressions are striking. I started in 1972, and this technique was never used, nor have I seen it. I want to make something!!! Thanx
Tom
Robert, I love your teaching, you are exact and precise, wait I repeat myself
Thanks for your overview of this technique. Your Craftsy DVD presentation was superb as well. Much appreciated for sharing
Thank you for this demo!!! I started foldforming years ago and have used dapping points for my indents.... and water to cool. You have shown me an easier and cleaner way to do this!!! By the way, I have now watched this video three times.... This technique has endless possibilities!!
You are an excellent teacher! Thank you so much.
Wonderful explanations! Thank you.
Great explanations with the demonstration!
Thank you Robert, it’s so inspiring!
Wow I have to say thank you .. the way Robert explains tools & processes is just what I have been looking for & I've been watching a lot but quick , fast , easy & informative those videos were Sooooo lacking... I inheriated many tools & I assume incomplete sets. I have been exploring my capabilities at Art jumping & progressing from media to media for many years now .. this last year I finally got the notion to turn my attention to precious metals.. unfortunately, I have yet to make the jump into my metal collection/pile, for lack of confidence I will be watch all these videos , heading to you website next for info & tools that will complete my sets.& pieces that will streamline the techniques ...
Thanks again !
Excellent tutorial! Thank you so much!
You are a good teacher. Also a very talented jeweler.
quite amazing, you're a magician, sir. mesmerising work!
Very interesting segment. Thank you for your many technics!
Thank you. Excellent teaching.
Wow, this was very, very, interesting and informative! It sounds cool to have a foldform named after someone. I'd be interested to see a list of all the formfolds named so far and how each is done. This was really awesome! 👍 Thanks for sharing! 🙂
Wow! Thank you for this video I’ve been doodling with a lot of copper so this is something new and really cool! Thank you very much! 🤘
That was an amazing introductory video. I’ve seen jewelry made utilizing this technique and have wanted to learn how to do it.
I’ve subscribed and look forward to more of your excellent tutorials.
Thanks for this, excellent presentation and has inspired me to give this a try....
Amazing video, very awesome explanation! Thank you!
This was so I formative and now I'm thinking for outside the box with what I can do with folded forms!
VERY GOOD WAY TO EXPLAIN IN DETAILS HOW YOU DO IT!... WELL DONE!
Thanks for this great video! You are a wonderful teacher.
Thank you for a very informative video.
I can imagine some of these forms working together with some chainmaille weaves also. I am already having a rush of ideas from watching this, and in my mind combining it with other techniques.
Wowww! I have never heard or seen this type of work. I'm a long time wood turner but getting interested into polymer clay work and now this! My mind is whirling around. New projects!! I just completed your site info and look forward to leaning much much more. Thanks for the videos.
very inspiring, thank you for sharing
Us sheetmetal workers have been doing this for about as long as we've had Pittsburg lockformer machines to feed metal in crooked and then try to fix it before the boss finds you just burned up $50.00 worth of tin in 10 seconds. Great instructional though. Thank you for sharing new techniques.
Excellent video! I learned a ton, thank you
💚
Fantastic video, very well done.
Great video! Thank you.
Thank you sooo much for this info and action packed vid! I learned a lot! 😊 Just one question....is it at all possible to use a flat piece of pre-fired metal clay for this process?
Great information and inspiration!
Thank you for such a wonderful introduction to this fascinating technique! I can’t wait to find someplace I can make some noise so I can give it a try :-)
Wow thank you Gona give this a try.
Thanks for the info. I'm going to use some of it on my next project.
You can make it really cool in Hinges like this too...just put a wire in the fold and it sizes the Hinge Pin...make a long one and cut out Butt Hinges any length.
Great lesson. Thank you
It's very nice skills!
Thanks!!!
Good luck!!!
OMG. Thank you so much for this very informative video. Im just starting out and this tutorial is so very helpful.
Very informative video that was well presented.
Thank you very much for such an interesting and useful information.
They are the same technics used for forming gold and silver over many centuries .it was secret in old time.
Thanks again for those detail information in your video.
I like how clear you are with the terminology. You might be interested to do an image search of Moroccan Koumiya daggers and even some Yemeni and Omani Jambiya/Khanjar daggers. They do some similar metal forming for their handles. Though I think perhaps by very different means. But a lot of the butts of Koumiya handles in particular look very much like how the two pieces you show at 24:00 do.
Thank you for your video I was looking for this
Gracias por su video.Podría considerar traducir al español.Gracias nuevamente
Thank you for sharing ❤️🤟🏻😊. Love your videos you have a Fan , I new to Wire Wrapping and love 💕 it but make so hard from working it so can’t wait for Nilling video ! 🥰🤟🏻
Fantastic video and excellent knowledge. Thank you so. Ugh 😘😘
Absolutely fascinating..
Brilliant. Many thanks
I was waiting for someone to address the Winn the Pooh watch. Love it!
Me, too! You know he has a bit of whimsy in his soul!😉
You are Great Teacher!!!
THANKS FOR YOUR INFO.....LOVE IT
I have been working with copper and I was getting quite bored with what I was doing. I have many books on this subject but it's not like watching someone do it and telling you the pitfalls. Thank you so much for sharing. I am hooked.
Thank you. I was woundering if you could do a video on pitch bowl forming. I use some of my fold forming in inlays on doors of jewlery boxes and other decorations.
very interesting and easy to understand even for those who are not native English speakers, like me. Thank you!
Thanks you gave me an idea.
Great video! Thanks
This is so very exciting, thank you, I can tell I must give this a go !,
This is emaizing... I akcualy stop working with polymer clay and start working with metal,and now a sow this combinacion metal and polymerclay. Whot a great idea and mokumegane texnik with fold forming that is so stunning. Thanks for shering this video with us. Hope you understendmy, my englis write is not sobgood.
Thanks!
Brilliant fold forming tutorial, I love your enthusiasm for it. I've used it only a few times, but am keen to get to work on some of your examples. Thank you so much. : ))
Most excellent.
Great video
Superb technique, beautifully demonstrated!
Material science Note, which you may already know:
Material Deformation which leaves a mark = Plastic Deformation
Material Deformation which doesn't leave a mark = Elastic Deformation
You would probably intuitively understand a stress-strain curve.
Subscribed
thank the tip for the u shape is awsome
By the way, thank you for this very instructional video, I have learned a lot, I am a subscriber👍👍.
I am also working with larger sheets of copper, to be used in box making--say, 8x8, 10x10. I'm trying to determine the best type of gas and cylinders to use for annealing such large sheets. Can you help with that question.
Thank you!
Awesome!!!🧡
THANK YOU FOR SHARING YOUR WORK NOW I HAVE TO MAKE SOME MORE HAMMERS WHAT I WOULD REALLY LIKE TO KNOW IS WERE DO I GET A VISE LIKE THE YOU ARE USING GREAT VIDEO THANKS
Thank you
I just had to hammer some metal as you were teaching. Great fun and fast.
Very exciting.
Mi abuelito 👴 muchísimas gracias 😘😘😘
Cool video.
11:40 I flew back in shock when you touched the blade. It might be good to clearly mark the knife as a "blank cartridge" so that you don't accidentally pick up a live knife (as happened on the movie set of Rust). As someone who knows a little bladesmitthing, one way would be to take a chunk or two out of the edge with a file, probably near the choil. It should look like a really aggressive seration, but also, it looks distinct because nobody would ever do that to their edge.
Fabulous video!! Love that you explain what to do as well as WHY it is to be done a certain way. I learned so much. What is the gage of copper sheet you use in your demo?
Hi Nancy, Robert is using 24 gauge copper. Glad you enjoyed the video!
So interesting and inspiring. Thank you for your patient explanations... I have ideas dancing in my head!
He's right about the rubber under the block. Hearing protection and/or rubber under your block is very important. I hammered on an anvil for years making jewelry and knives and I have damaged my ears. Any loud noise and I hear a scratching sound and I constantly have ringing in my ears. During the day when I'm busy it's not so bad but when I'm trying to sleep at night it's extremely frustrating. Protect your ears people. It's also a good idea to wear eye protection when doing this stuff.
This is sooo cool. My eyes are twitching it's so awesome.
aprendo so pelo visual, adoraria que alguem fizesse legendas em portugues ou espanhol
Origami with metal as a smith, your use of “forging” is interesting. :) I have researched some bracelets that are Byzantine, and they have forms that are very similar to this, and looking at your technique, they may have used this exact same process..
Jeg i
Nice video, Thank you. My suggestion/(name), at 19:30 call it a Snake Scale Fold. To me, that's what it looks like. I'm finding this creative and interesting! Back in the early 70's I apprenticed as a Blacksmith fitter for a company who made industrial noise cancelling silencers for manufacturing plants and aircraft engine testing structures plus military work. Part of my job was to turn 40 foot long "I" beams (@ 200 lbs. per ft.) into perfect circles by hand, with just a torch and a Crow's Foot. These weighed a few tons each. It was a Hard, Hot, Sweaty job, but I learned a lot and enjoyed it. It' was cool having a unique job! Thanks; and please continue these videos with more ideas.
God bless:
Stoney
Thanks sir
Greetings mon ami. Great work on here, but I have to disagree that you say this is a new technique, perhaps the name 'fold-forming' is new, but as a full-time restorer of ancient objects and full-time armourer of over 30 years I can confirm I have worked on objects that are over 2000 years old that have been 'fold-formed' in fact there would be no other way of making them, for example the rings of a 'Carnyx'. Iam sure the ancient Egyptians would also have used the same techniques, because as I said before 'there is no other way'.
I commonly use this technique for making the rotating bicep joint of the Vambrace for 16th century armour. The trick after forming being to then anneal, form to the round then to 'rope'. As I always say, "If you are using the correct tools, and you have just found the fastest way of achieving something, then congratulations, you have just found the correct way of doing it!'
Best wishes and compliments of the season to you fellow metal-botherer, from me and all the mice in the workshop. 🏆🎄⚒️🐀🐁🐀🐁🐀🐁🐀
Wisconsin!! Milwaukee is where I'm from!!
BREATH TAKINGLY BEAUTIFUL LOVE THE FACT YOU CAN SIT AND DO ,AT 78 A BONUS ,GOODBYE MOUNTAINEERING . THANKS