Mounting My New Bont Parkstars
Vložit
- čas přidán 20. 08. 2024
- Hi everyone! Today I finally got around to mounting my new Bont Parkstars. I decided to try out the Avanti Aluminum plate today with this set-up. Can't wait to get my wide trucks and sliders in the mail to finish this up! If you have questions, leave them below!
Thank you for watching!
Disclaimer: I am not a professional skate builder and this is not meant to be a tutorial
Find me online:
Instagram: / wheely.moose
Music:
Park Bench by misterE
Soundcloud: / eswigz
This video is not sponsored. All items are purchased with my own money and these are my opinions. - Jak na to + styl
I would love to try doing this in my own. I’m so scared of messing up. You make it look too easy!!
MOOSE! I was literally just about to reach out to ask you about mounting your own boots. Then I found this. Thanks for sharing! You're whole channel is great.
Hey Anna!! Thank you so much!! 😁 If you have any questions about the process don't hesitate to ask!
So happy seeing ur videos again!
Thank you for watching! 😊
Glad you’re back ! Do you have any tips for new skaters ? I have moonlight roller skates and im terrified of even standing in them 😭
Thank you Angie! My biggest tip for getting comfortable in your skates is to wear them around your house, specifically the carpeted areas so you don't roll. Get used to the feeling and weight of the skates first. That will help you feel more secure in them! I used to do chores in my skates to get used to the feeling. And remember to bend your knees! Never ever lock or have completely straight knees while on skates because that can cause you to loose balance. Start small and don't let social media make you feel like you should be learning faster! 😊 If you have a specific issue you are trying to get past, let me know!
@@wheelymoose thank you so much ! I never thought to wear them around on carpet 😅 i always just wanna jump into it. Also hope this isn’t weird but i love the ears ! Every time you post i think “ damn , i want a pair “ , any faux fur ear shop recommendations ?
@@Obituarybunny Not weird at all! The ears I've been wearing are from Etsy! They are from a seller named StrawberryLionShop. But Etsy has a ton of amazing ear makers on there ranging from realistic to fantasy!
@@wheelymoose thank you !! 💚 already excited for the next vid !
@@Obituarybunny No problem! Thank you for watching! 😊
Hi! Great video, what is the name of the tool you used to tighten the nuts? Is it a hollow socket something? And what size? Thank you!
Thank you! That tool is a socket ratchet and I believe the size I used was 10mm? I'll double check the size of the socket and update it if I was wrong!
beautiful boot!! hope to see you skating around in them soon, maybe even with some black/white ears to match ;)
Thank you!! I'm hoping to get back on my skates soon! 😊 Oo good idea about the ears matching!!
@@wheelymoose how's the leg feeling?
@@caseyleejones8207 it's slowly getting better. Little improvement on the range of motion side of things but my strength is coming back pretty good! Thanks for asking!!
@@wheelymoose Sweet
You don't get wheel bite with those bolts still having that much left on them? I have to hacksaw mine flush with the nut otherwise there's always wheel bite. Mind you, these are oldschool Galaxy plates which are pretty low to begin with.
I haven't! Then again I don't use any wheels that are taller than 57mm. And since I have added wide trucks to this set-up I haven't had to worry about wheel bite at all
@@wheelymoose That makes sense! My wheels are 60mm speed wheels and regular trucks.
Hi! One of plates came a bit loose in the front after a particularly aggressive derby session on my toe stops. Have any suggestions on how to keep them from coming loose again? I tightened them but tried to keep them flush with my boot. Thanks!
Hello! You can use Blue Loctite on your plate bolts to help keep them in place. Just add a drop to each bolt and tighten down the nuts and you should be good to go! (Please only use Blue 242 Loctite as it is removable when necessary with force.)
@@wheelymoose Thank you so much for the reply! I will try that :)
If I may, I’d advise to wear a dust mask when drilling fibre glass and preferably do it in a well ventilated place to prevent inhaling it. It’s not exactly healthy.
Thanks for the tip! I had realized that after I was done drilling and was covered in dust. I will make sure to wear a mask in a ventilated area next time I have to mount Bonts!
@@wheelymoose please be careful 🙏
@@marcodebortoli Thank you Marco! I will be 😊
How did this setup work? I’m currently removing my Bont Tracer plates and installing the same Avanti plates- and wide trucks- XOXO’s
This set up turned out great! I haven't had any issues with the plates and trucks since I mounted them. The XOXO trucks feel really sturdy with this plate which is awesome. They also do not feel extremely heavy after the full build is complete which was a big plus for me!
What is the name of the tool you used to break off the long bolts ? Thanks for the help
@@miked9112 It's called the Bolt Break-Off Tool by Snyder.
Hi there do you need to add a heel blocks to those plates or are they built into the boot? They're nice looking boots
Hi! I did not add anything to the boot when I mounted the plate. Bont Parkstars come with an internal 23mm heel already built into the boot. The internal heel feels great to me so I didn't feel the need to add a heel block, though some people have if you want a taller heel. Thank you!
Nevermind. I found it lol
I don't think VNLA has a center line. Shit
Hello thank you for sharing! Are you selling your previous bonts park stars on Mercari or Poshmark?
I'm currently selling them on Mercari! Link below if you are interested!
www.mercari.com/us/item/m49096319811/?gclsrc=aw.ds&&adgroup=121903074456&network=g&device=m&merchant_id=126358573&product_id=m49096319811&product_id=529453872365&gclid=EAIaIQobChMI9bDVk5bx9gIVah6tBh25tgz1EAQYASABEgKiSfD_BwE
You are breaking off the bolts ... I was wondering who will you cut them off. I am sure you can find shorter bolts next time :) They do come in all sizes. Just check any hardware store.
What size are your Jacks?
I wear a 7 in the Moxi Jack Boots
@@wheelymoose interesting, thank you! And do those fit you right/perfectly? (Asking because I'm a 6.5 in Jacks and a six in my fairly old Bont speed quad boots. i know I need to go down for the Parkstars but I wonder how much, to a 5.5 or 5.)
@@35nee Of course! I would say that honestly the 7s are a little big on me. I could probably fit into a 6.5 Jack. My feet measure at 250mm which fits perfectly in a 5.5 bont without my toes being squished or anything
@@wheelymoose thank you! Hope you get to skate your new set-up soon!! (I had a broken ankle, also from skating, ten years ago, so I know it's haaard.)
@@35nee No problem! And thank you!!