Paper Beretta 92 Full assembly
Vložit
- čas přidán 22. 12. 2023
- Long and boring video of me strugling to assemble this masterpeace of engineering
Templates link
drive.google.com/file/d/10065...
Important note. My templates are not for beginners. To use it you need to be an experienced paper crafter or to put some serious effort in it. There is no PDF file or instructions. If you don't know how to download and open this file and what to do with it, then it is just not for you. No offense. - Jak na to + styl
bro turned paper back to wood
he turned paper back into wood
FR 😭🙏
Probably resin
@@bev8200sanding, gluing paper together makes that (gun in video)
X acquisto sono interessato
I have an actual beretta 92fs and the level of detail is incredible. I had no idea something like this could be done. The literally only difference i could notice is that you don't use roll pins and there are no beretta insignias or markings otherwise its an exact replica. I personally think beretta should have this in their gun collection to be stored for the foreseeable future as a museum piece. But ofcourse you spent a long time making it so you should get to decide what happens to it.
Does that mean that this gun can fire?
@@EnclavegovtofficialUSA It could if the components were made of metal but since they are made of paper they can't.
Its 3d printed. They're saying paper so they don't get in trouble with CZcams or the law. This is a ghost gun
@@kikacruz4560😂 no it's not a "ghost gun" and please out of respect for common sense and intelligence never use that ridiculous propaganda phrase "ghost gun" again
@@noncompliant209caliit’s definitely not paper though. When he loads the spring into the mag, it defo sounds like plastic and not “paper”.
Indistinguishable from the genuine article. It's amazing.
Великолепное качество. Ваши работы по сей день непревзойдённые образцы высочайщей тезники. Браво.
My veteran grandfather said : if this guy are life in my generation. Countries will search for him.
He was shock dude, his expression tell everything. He said u re insane. And goverment must have people like u.
I tell it was made with just hand and he said.
Okay his not human ❤❤
I can tell he loves his m1911s haha
I've been waited for 2 years and this masterpiece is really worth for it
My brain cells actually died knowing that this is somehow made of paper... I thought it was plastic/wood. This is truly remarkable
the effort of detailing the gun model is so crazy good.
guys it is paper look at other vids featuring the same gun but its still not painted and hes been making sines 1year ago
Спасибо большое за предоставление материалов.
Very detailed really surprising, this gun has a lot of difficult little details but you still succeed.
This is so crazy accurate, props bro!
Very nice paper model. This is very impressive.
Man is going to catch a felony for his "paper machet“ project
Es un genio para armar ese fierro eso es algo qe no lo hase cual qiera mucha avilida y saber un genio mis respetos
It looks too realistic... The creator seems to have golden hands.
how do you made the grip texture? its awesome.
Это шедевр сложности!
I wanted to ask a question. These pins don't fall off, do they?
That's interesting I love it i like gun you have the most best gun 😊😊😊😊😊
thats insane. i love it
Hey there, I have this model in airsoft version. I can’t put back that small spring 16:23
It also looks a bit different. Do you know how to put it back …? Thanks a million
Completamente compreensível 😊
Your building process. Are you using super glue for everything? Also, do you let templates dry before stacking and gluing? Would love it if you can give an answer :)
I'm using superglue to soak surfaces of parts.
It is important that hardened paper was completely dry before gluing, otherwise finished piece can bent
@@gotobad7736 Great, I thought so cause it sounds like it's really tough. Is super glue the only glue you use? It would be awesome if you had videos of your building process. I'm getting back into creating but I want the results you have but don't know how to do it good like you
@@TreyvienPhillipsit is multiple layers of paper and glue makes material tough, not surface cover of super glue. I use PVA or Elmers glue to connect those layers of paper
How thick those layer of papers are? Did you use other material such as paperclip (like Tacome42 did) to strengthen the paper?@@gotobad7736
What software should I use to open the file?
how did you make paper that solid
Yo my mate which one ya makeing next.. these are actually really good especially tye fact there made with paper 😂😂 ( keep up the good work mate)
这是我见过最好的手工
Как ты смог сделать такую поверхность на боковых хватах? Даже предположить не могу...
Will there be a video showing the firing and ejection of bullets? I saw in your previous videos you shown the ejection mechanism but you haven't shown it with the paint. Aso great job on the gun.
my previous video was showing all working mechanics with paint
@@gotobad7736 My bad didn't see that one. I will be on the lookout for any new videos cause this is amazing.
Ти геній!
I can't open the file how can i fix this issue
I hope springs made of metal
Урааа
You can do the same, with thin sheets of steel, induction welded. 😉
God save his skill...
will you please show us the star model B THANK YOU , I AM FROM EGYPT.
Could you make a long gun? e.g. a submachine gun or an AR15 rifle. that would be amazing your works are perfect
it takes me 2-3 years to make a pistol. I think the amount of time to produce rifle will be at least 5 years. It is too long for me right now
@@gotobad7736
Can you try making a Glock 17 next?
Also is most of the time just building or other elements?
Я удивлен тому что у вас получается создавать такие замечательные модели знаменитых пистолетов, особенно зная, что в Украине запрещены пистолеты 😅
How much does this gun cost? Can I buy it?
I watched the whole thing at normal speed and I was riveted the entire time. Or should I say I was tiny dowel rodded.
Do you have your permit to build?
東京マルイのM92F(BB弾用モデルガン)持ってたけど本物がこんなに複雑とは思わなかった
バレルをスライドに組み込むところからはモデルガンも同じだなーと思った。
This is no way paper! the sound is like real metal!!!
How did this guy make the paper look and feel solid 😭 pls tell me😭😭
what kinda paper is this
How do you get into the posesion of the blueprints?
Description, now mind you this took a whopping 3 years for this guy to make. And he is VERY skilled so good luck even finishing it within a decade
Is the numbers in mm?
How to open files, sorry i don't know...
What did you use to paint this? I've seen some people create a treated steel look with graphite powder and clear coat. Is this something similar?
it is usual Tamiya paints, black and gunmetal
@@gotobad7736 Thanks!!
Гарна робота! Чому не скористався готовою викруткою, а використовував саморобну? Там є якийсь секрет?
Металева викрутка пошкодить паперові гвинти, тому зробив із пластикової карти
How do you Make paper that hard
big gun next?
Вітаю із завершенням моделі, земляче!
Довго вже спостерігаю за твоєю творчістю. Такі моделі - взірець охайності, моя повага.
Не підкажеш, або взагалі на відео зняти, процес фарбування. А ще точніще - захисту фарби. Багато рухливих частин, і лак з фарбою витирається, не підкажеш як це побороти хоч трохи?
А за відео ще раз дякую
Фарбу не захищаю. Очевидно, що макет із паперу всеодно не володіє такою міцністю, щоб довгостроково витримувати механічні навантаження. Якщо уважно подивитись на фото реальної зброї, то вона завжди має різного роду сколи і потертості, тому я спокійно відношусь і до пошкодження фарбового покриття своїх моделей, від цього вони тільки виглядають більш реалістично.
Що до самої покраски, то тут нема ніяких хитрощів, можна красити хоч аерозольними фарбами з Епіцентру.
З самого початку цей канал був лиш доповненням до моїх ворклогів на only paper, там я детально описував процес, а відео знімав лиш для демонстрації рухливих частин
Can you make the Glock 17 Gen 4 please 😊?
can u please make a tutorial on how to make the paper like this, harden, i know its made using glue, but can u show a small tutorial or something, i cant find any vid or tutorial on that anywhere
czcams.com/video/AiORAVsKoEs/video.html&ab_channel=PaperArcher
It's so close to the real thing that if you replaced the hammer and firing pin with real ones I wonder if it could actually shoot (only once obviously)
It can shoot but my hobby is to make precise copy. If i wanted to shoot i make it out of metal
Brother, what kind of paints did you use?
Tamiya black flat gloss and semi gloss lacquer paints
I downloaded the file and I tried to open it on pepakura but it gives me an error saying that the file format is not supported. What do I do?
Can you make more
Essa mola do ferrolho está muito estranha?
сделай тутор на 3dm, пожалуйста!
You should make prop guns for movies and what not. I heard they pay a lot.
Are the springs actually sourced OEM? If not, what did you use in practuce for this model?
Collect some springs here and there and pick suitable for purpose. Magazine spring is selfmade from steel rope
@@gotobad7736 alr thanks man
@gotobad7736 Sorry to ask once more, but are the springs source from pens? I wish to do this project for myself as well
@@seanchristian572 springs are not from pens
@@gotobad7736
Oh alr
WOW!
do you electro plate your paper?
No. It is Tamiya paints
how did you prevent the paper from yellowing?
my glock looks dirty after a few days.
Clean hands)
Best
Next glock 17 ?
Forget about find no you army nice
What materials did you use to make this ?. And if it's paper how did you make this mesh and did you glue it?. Or did you 3d printed this?
out of paper, check his channel for previous videos
@@mike_gread why is it so solid when he place it down?
@@janetdaguro2307 Because you put in some resin (probably) to harden it. Or loads of glue. But in the end it's just dried out paper shaped and painted. That's some f*ing impressive work, got to admit. Hope it helps :)
@@mike_gread ok im making a 1911 so thank for the suggestion
are u seriuos that all are paper? the sound like a metal
Yeah you can watch the progress of this model though out the years. Its really cool.
Quantas vezes?
How is this paper? It looks and sounds clacky like some kind of resin or wood.
Paper sealed and pressed with epoxy resin. Still paper and amazing job.
@@SeRgU123 Ah, I see. That's pretty cool.
Yeah definitely paper man definitely
The only thing that will make this Paper Beretta 92 cool is if it could shoot real bullets 😎😎😎😎
Доброго вечора. Чи є у вас фали Beretta 92 у форматі STL або STEP?
Доброго. Я використовую власні 2д креслення. 3д моделі люди витягують із World of guns
Можете поділитися кресленнями?
i just wonder how the paper is so solid
He hot glued each layer together, then sanded off the excess.
Ссылка на шаблон выдает ошибку, не знаю, возможно только у меня, (модель супер!)
Realmente, o link da um erro e eu não consigo apagar esse erro que foi baixado☹😔
Ссылка рабочая, только что проверил с другого акаунта
@@gotobad7736 obrigado 👊🏾
@@gotobad7736 там почему-то только .3dm-файл. Вероятно, это только сама модель без выкроек.
я не использовал 3д модель, у меня ее и нет
When will you sell this?
For me its priceless. Nobody wants to buy paper gun that costs more than real one
хоть убей не понимаю как! вижу что бумага но добиться плотности пластика это же надо очень долго склеивать бумагу друг с другом
wait this is PAPER?
Please teach me to get strong paper
google hardened paper
Thank you
Why does this look realer than the real one wtf
Bro we need 😂 tutorial
Confirme on the way clearly paper signed
I wish i had that, though I’m underage, dont have a gun license AND live in the U.K, so the police would be suspicious.
Pls glock17 paper
How can i find construction to make a gun like this? I want to make a simple Makarov PM with hardened paper but i got no template (i made a mac-10 with PSMSA vol6) but i cant find any pdf like that one.
You look like tacome1942
Was this all done with paper? Sorry, I can't believe it.
Watch my previos unpainted videos. Its all paper except springs and some pins
Can you make a glock? Ilove all you guns pretty ultra realistic❤👍
Glock is too simple and boring. I like to make complex guns with lots of moving psrts
Oh ok 😅
It would be cool if u did tho@@gotobad7736
Let me help you get a lot more view! You know what would do it!! INSTALLING AN Actually FIRING PIN AND FIRING A REAL ROUND!! If you do see this comment and you decide to try it just be safe
I have so many questions
what about the blowback and shell ejecting mechanism?
Скажите пожалуйста, у вас есть какие-то соцсети, хотел несколько вопросов задать
Тут можно
@@gotobad7736 скажите пожалуйста, вы модель (запчасть), пропитываете цианокрилатом когда она полностью готова, или каждый слой, а потом эти слои склеиваете между собой?
@@GUS-bn1lg сначала склеиваю, пропитываю уже собранную деталь
@@gotobad7736 понял, а у вас было такое, что при пропитке детали, ее выгибало дугой? Дело в том что делал затвор и при склеивании была небольшая дуга, после пропитки стало прям хуже
@@GUS-bn1lg у меня такого не бывает, потому, что выкройки я делаю сам, продумывая заранее возможные проблемы. Если я и делаю длинный поперечный бутерброд, то всегда добавляю опорные поверхности для сохранения правильной геометрии
This CANT be paper, how did you get it so strong did you laminate 300+ sheets of paper, and carve them?????? I NEED FREEKING ANSWERES>
how is that paper???
Multiple layers attached with hot glue, at least 30 for the bigger pieces, then sanded so it looks like one piece
@@EnclavegovtofficialUSA You sure? Hot glue is terrible for keeping multiple layers of paper together from my experience. I don't know how you do it so it looks like this but I would love to know.
@@diarrhea6344 Super glue, not hot glue.
X acquisto sono interessato
That is why i didn't disassemble my bretta😂