CanAm Ryker: Wobbly Wheel 😱
Vložit
- čas přidán 25. 08. 2024
- What’s going and welcome back. So for a little while I have been having a little problem with my wheel wobbling and heavy vibration in the handle bars. I didn’t really notice it because the vibration usually happens around 50-60 and I’m rarely at those speeds. I also thaought it had something to do with the road conditions so it took me a little to diagnose the problem. You wound believe what I came up with LMAO!!! 🤣
Thanks for watching and if you have experienced any wheel wobbles please comment and share. Please Like Share and Subscribe!!!
My Ryker start doing the same thing thanks man. You save me some money I subscribe because of this. Keep up the good work my brother.
That’s what I do it for. Thanks for watching 🤘🏾🔥🔥
Thanks for sharing
Thanks for watching
That "after" ride definitely looked exactly like the "before", you just didn't want to believe it...
Lmao. Who you telling, I did take it to the shop and the replaced a bearing of some type. Better but still not perfect. Another view posted a suggestion so ima look into that as well
Do a search. There was a situation when they 1st came out where the nut would work loose. In one case the wheel came off. It maybe air this time but check that nut also! They also make a monitoring sys for them. (chk sling modes)
I appreciate that. I was doing a lot of looking around. Seemed like air pressure wasn’t the issue at that time. I did see that same issues and believe me I checked that too lol
@@OfficialJD3
Check on slim mods and they have a tire monitoring system that reports to your phone if your air pressure gets low.
Check your Ace tie rod. I had the same problem.
Thank you. You replaced yours
I'm interested in buying one. Are you enjoying it, or constantly having issues? Also, does it get really hot? I've heard some say the heat from engine is bad. Any input appreciated. Thanks
To answer your questions very simply I absolutely love Mine. I have a 21 Ryker 909 and I think it’s the best year. As far as issues, I haven’t had any major issues except this and after I got into an accident I needed another alignment. No major mechanical issues with mine. Again I have a 21 and I think this was a good year. One of the biggest problems in my opinion is the dealership cost for maintenance. Very expensive and I don’t think it’s very just the price. So I do a lot of work myself
Cool. Thanks for the advice. much appreciated
@@user-mb1yz6cl2u anytime
Mine runs fine, but I never checked the pressure ever since I took delivery in april
That’s good, idk what caused it. I keep mine in a garage and I guess the cool air did it once I kept it outside a few times during the colder months at work
👀
dang dude you need an air compressor lol.
Right, I actually have one and forgot all about it. best believe I'm using it now
🤦🏻 don’t take “guesstimates” from the internet.
Open the right hatch (cvt cover) and it’s printed out in black and white.
There is no finger test…spend $1-$5 and get a freaking air gauge.
It’s an expensive toy AND your life. Just a pound or two one way or the other can have a domino effect of issues.
Definitely, made sure did get one
😂
@@VinCode17 right
Right
you need to place a weaight on there.. the guy try to say mine was ok and goof to go, however I drove back exit to exit and told him, they might have placed it in wrong place, he took it off then refit it back, and he even said, "yes, its very hard to fit those types of wheels at times, and then it worked, he lowered the weight from 1.75 OZ to .5 oz and it worked smoothly, however my back bad now. lol
Its your right hand side pitman arm and pitman arm bearings
I will definitely look into it, thank you
Your 2 fronts need to stay within a 1/2 psi of each other for best handling.
Ok bet. Thanks for the info. It seemed like it randomly happened and it took me awhile to figure it out lol
Run 25 both front and 28 rear is good
Thank you!!!
I have the same problem on the same side and when I turn at high speeds, it makes a sound only on that side
Take it to the dealer, they told me it was the steering bearing that we ant bad. It’s a 7 dollar part and of course it cost me 260 to have replaced smh
Wheels out of balance possible
I appreciate that, in this case it was a steering bushing that failed
What was the problem
Looks like it was air pressure. Thanks for watching. Please like share and subscribe
It looked low. Get you a portable air pump
Looking back I do have one, never used it… opened it the other day
Lol