COWBOY TUNING MY TURBO TD42 PATROL 4x4 + 3 INCH STRAIGHT THROUGH EXHAUST! | HOW MUCH FASTER IS IT?
Vložit
- čas přidán 15. 07. 2024
- Todays the final episode on the TD42 Turbo series and we end it off with a bang! (not literal, thank god) Tuning the TD42 + A new 3 inch straight through exhaust system!
Follow Liam @ / _liam.jones_
SOCIALS (for all future updates and behind the scenes content ! )
INSTAGRAM - / aussiearvos
WEBSITE - aussiearvos.com.au
FACEBOOK - / aussiearvos-. .
Music by Scott Buckley - released under CC-BY 4.0. www.scottbuckley.com.au
Music from #InAudio: inaudio.org/
Track Name.
#AussieArvos #TD42 #TURBO - Auta a dopravní prostředky
Front mount will take out 100 deg. Needs more boost, 13 psi is right for ht18, and ditch the terribly restrictive snorkel, that is killing it. You are still nice and lean though, unlike some knobs going pig rich and overheating. A few simple mods and you will be blown away with the difference. Good work and good channel, love seeing young fellas getting in and learning. Keep it up!
Leans so good the idiots that think rich is good
intercooling it will make a world of difference.
Oath get some cold air into the big girl, nothing like hot air in ya intake
Love watching your work and enthusiasm. I'm a 71yo fan of your channel. I've had my GU TD42t for 30 years and it's my treasure.
I've set my 99 gu turbo up with a couple of cheap intercooling options via fleabay. Barrel 10x4 or in my case a bigger cubed one rated to 600hp 😂 It's fed by a heat exchanger up front with a 12 inch fan, plus water pump. Pumping cool water up into intercooler. It's a cheap option all up for under 500 bucks I run 14.5lbs boost. As you know..the factory airbox is restricts air flow from the snorkel. Fuel Economy is always great. Mine is primarily used for touring. At 100kph average EGTs 250. Pushing hard up hills it rarely reaches 400 plus in normal conditions.
At 90kph to 125+ it pulls like a train and just keeps running on. Its never been flogged past 3000 revs in its life either. All the best
🙏🍀
Sounds great, but you might want to put a heat shield of some sort between the exhaust and the tray so you don’t melt or cook what ever you have in the tray.
Nah bro nah bro, heated water for showers 😉😂
Virgin fuel pump screw is a rare thing nowadays !😁
All your youtube content are exciting to watch. Hasn't missed one of your episodes. Keep up the good work.
Awesome guys! Love the build!!
Just upgraded the Ht18 on mine and also did a whole heap of supporting mods. It goes to mechanic next week for a tune and new injectors, after 310000 kms my car has never skipped a beat and now is running better than ever I have done a lot of the work my self too so I have really enjoyed watching games you guys do this project. Hope to see you out in the high country soon
Have become absolutely hooked on this channel bloody ell. Massive respect from another uni student, balancing your CZcams and keeping up with work and study is mental. Keep trucking boys
Sounds sweet as!! All that turbo whistle and way smoother. Like you noticed, you'll really find the difference is when it's under pressure like a hill or if you had a huge load or trailer bla bla bla. Might notice $10 in your pocket after a 2 tanks of juice?
Love these vids boys. Love watching yaz go through the experimental and diy stuff. Aussie arvos is the only sticker on my ute haha 🤙
Mate turn the fuel and boost up a bit more, will actually help get your egts down with more boost and won't be getting as hot with the extra power with the fuel aswell, can't kill a td with a stock pump and turbo maxed anyway. 3/4 turn of fuel and around 15 pound boost will be alot better to drive
You need to watch your boost gauge give her a quarter turn more fuel and watch your boost gauge and look at the black smoke boost gauges are so important in telling you how she is going it won’t do any damage it’s how we new how our race truck was performing cheers and good luck Dan
A few comments down Zach mentioned injectors, this I would do when playing with fuel. A weak injector will Crack early with a poor pattern, meaning one hot cylinder not being reflected by egts. Cheap insurance! I'm enjoying watching you build up the old bus! Needs a coat of raptor now....hint...
Lovely video boys keep the great content up
Thanks Austin!!
Up the boost to 12psi and turn the fuel 1\6 more of a turn. Not going to get hot if you have the boost to burn the fuel. Awesome vid as always.
Solid work boys!
Be really interested to see what difference an intercooler would make. All positive I think, it's why they're fitted. It'll give you denser, cooler air into the engine so your boost makes more oomph. That's not to detract from your great efforts and presentation here. Superb and thanks for sharing!!
Could put a zd30 intercooler on for a cheaper option!
Before touching the fuel screw, set the pump timing to suit the turbo. Cheap tool and simple to do. I have always worked off .76mm btdc, seems to be the sweet spot.
those 4.2s sometimes have a filter in the injector pump under the main banjo bolt feed that never get cleaned and can hold them back heaps could be worth to check it
love it keep it up guys
Great result👍
Sick exit point on the exhaust
Just letting you know, that circle thing on the intake elbow is a pressure relief valve, I believe it opens up at 14psi. You can block it off with a brass bung from bunnings cost like 5$
Actually wanted to know this awesome video mate
Yeah that’s sick just did my dads Ute. When he was on holiday. Neck mod spring over diff
Sounds great 👍
yeah boys love the patrol
A touch more fuel and advance the timing a scotch with a eBay intercooler she will be happening.
Those ht18s are happy up to 14-15psi
a small top mount will be 150 bucks on ebay, as long as its welded youll be sweet. itll give you way more power and let u wind some boost through it
Dont be afraid to put more boost in, more boost will keep the egts down, try and create the least restriction points leading to intake
I got my td professionally tuned and made soooo much difference in egts and power would highly recommend mate. Payed around 350. Money well spent. Mines a wagon!👍🏻. Awesome stuff dude. Would love to see the difference now that you have records of where you are at now. Great vid
If there’s only one fuel screw, what did the professionals do differently? Just curious
Sick!!👌
Wishing the pub was open great food there!
Needs a front mount. You will be shocked how good it goes. Good video 😎👍
I would have gone for boost lower down the Rev range to improve power off road, but a great vid none the less😎👍👍
Remember James's ute also has more fuel, an intercooler, free-flowing snorkel and more boost. You should try and find a cheap intercooler and a bonnet scoop somewhere.
God job mate done well 🤙🇦🇺🙏
With that hill climb, your definitely doing well considering you have a big steel canopy on the back now!?! Big improvements
Change cross over pipe to round & lift the lid on your intake manifold makes massive difference
Get a cheap ex GU top mount youll drop 150c off those EGT's.. Sounds good too mate! HT18's sound excellent even if they arent the most efficient blower
Hey guys love the build, would make much difference if had the stock intercooler n scoop?? Don't now much about turbo set-up
You need more boost and fuel dude! It will bring your egts down and it won't hurt your engine.
15-18psi is the ticket
Front mount would be a big advantage as well but can't get away with not having one.
As well get your injectors checked/reconditioned
Love the videos 🤙🏻
Trust me mate a FMIC off eBay will make so much difference. Much cooler egts, bit more power and acts as a catcher too incase your turbo shits itself. Your car would love it, it’s not the amount of boost that kills td42 it’s generally people over fueling the shit outta them but anything below 14psi for your na blacktop and it’ll last forever bro, good job.
Like you said , they're not for racing , i've just put an intercooler on my GQ TD42T and gone from a bigger Safari turbo ( needs a rebuild ) to a smaller factory GU turbo with only 10 pound boost but haven't had a real chance to test it because my brakes need doing .
Wind the idle screw right out then wind the fuel screw in until it idles good
It would sound mint if you kept that same exhaust spot except ran duals get a y pipe put in and run dual 3”s.
You will feel the difference uphill on a load. Remember it's a commercial vehicle. It's designed for carrying loads not zippy acceleration. You will tinker to electronic and intercooler as its addictive over time.
@@jasper287 Efi
@@jasper287 mate he means swap over to efi ya gronk
@@jasper287 what are you going on about mate, do even know what EFI stands for
@@jasper287 you can do anything with enough money. Id keep it mechanical but it can definitely be done. If you can do it to 60s petrol v8s you can do it to a td. Now before you go ape shit, I'm aware diesel and petrol are completely different. However efi on a diesel exists via electro pumps (might even go by another name) especially when it comes to ecu mapping etc
@@jasper287 have it your way champ
YEE YEE
490 egt are pre high, Defs add a intercooler and some more fuel and boost.
Hey mate the reason it idles high no soot is there is a threaded rod on other side of pump that needs to come out That drops ur revs as u wind in the pump (I’m terrible at explained that aha but can show u a vid if u meed
Is it heavier now with the new box? Might be interesting to put the exact same gear on the tray?
“440 EGT’s are pretty high”
😐Me sending the 12mm & 18g up hill at 540”
540 and no mercy keep going i know the feeling 😂👌
Add a front mount intercooler will drop egt and make a little more power
Liams face when he goes past the pub now
idea for the next one: is a staino snorkel better/more efficient than plastic? (like the one's running now)
Good vid. Sell few more shirts and treat yourself to a dardy ufi crank snap kit heeps fun 😂👌
Intercooler and 11mm pump. Not worth it without it. All good work with what you got
you should get a fairline fibreglass bonet scoop
I just did a +t ar50 fuel screw to the max and it pulls hard af
It'd pay to put a tad more boost into it when I had my old terrano td27t with the ht12 I gave it a quarter turn and upped the boost to 15 it went much better used less diesel too.
My td42ti Gu with the factory tiny top mount egt daily driving freeway hill whatever temps would hit 450 and keep climbing I put a front mount on it my egt never even see 300 on the same tune and that’s towing everything wish I done it sooner
where is the rest of the AA crew ?? and also when. are you all able to finally hit the tracks together again for a massive track weekend ??
Give it more boost boys, that will help egt
Hey guys, this is the 3rd time I've asked. Maybe you're too busy filming but can you please let me know if you can get mech sizes 5xl or larger even if its a special order? I've got mates that will buy them.
Thanks
Sounds like every other turbo td 😂
You should raptor the car and tray. Make it look nice and perform nice
Get a stainless 4 inch snorkel and high flow filter makes a world of difference
I’d like to do the same to my GQ 96 we’re is this best place to buy the turbo kit great Chanel lads keep it up 👍
I’ve got a factory turbo intercooled GU 2004 and I’ve left the factory inter cooler alone. It’s runnings 21psi Max, sounds like a lot but most of the time I don’t put my foot in it that deep to let the boost get that high, it will only really get that high on boost on the freeway.
Most of the time She’ll do 5-10 psi, put my foot into it a bit more it’ll do 15psi. Can do 110 up pentland hills and won’t get hot either 👍 doesn’t go over 500
Yeah 11psi boost was the factory. Give the screw another 1/8 turn. Using your camera at the back of the car watching for black smoke is the best tuning tool you can use
Change the snorkel so it is facing forwards it will make a massive difference to the performance
Mate, there's no harm in more boost with those non-boost compensated pumped engines. in fact, you're probably doing for damage than good. Diesels run cooler when lean and the turbo will only produce as much boost as you feed the engine fuel through that screw. Disconnect the boost line going to the wastegate and you should get a few extra psi before the gate opens but you should also notice egts dropping a lot.
Yeah don’t just disconnect the waste gate, with a ht18 you’ll get over 20 psi roughly anything that high with that turbo is just insane amounts of heat.
He should get a boost adjuster in the waste gate line.
He should also get an inter cooler
@@toms_gupooe The exhaust pressure will still open the spring though lol. You'll only really get a couple extra psi over the spring rating. Also it'll only produce as much boost as you give it fuel.
Disconnecting the wastegate boost line is called "Pulling a James"
@@TasmanianHillBilly I guess on a non boost compensate pump yes,
@@erikv86 😳😳
Stock tb48 will still outrun it 🤣 no cooking or hurt feelings. Just servo stops hahaha
I recon do a respay👌🏻
In chinese we say, this boy is beli beli gud !
Think about putting in new injectors 👍
Not bad guys
I’m a bit behind on your specs for this, is the engine stock, as in original ks? I was thinking of doing something with my 93, td42, engine has about 260ks as it not original, gq is similar to yours with leaf springs all round and 450ks on the chassis, I’ve owned it for fifteen years so not eager to be rid of it anytime soon
Any recommendations for a similar turbo? I have seen a few on eBay and I’m keen to do something very similar to this Ute. Just need to go up hills
You need to raptor the hole truck next
Also add a top mount intercooler with the hood scoop
intercool it Egts will drop!
When the after market intercooler coming
I found the best way to get the fuel screw right is to send it with a rattle gun
Put a water to air intercooler on it you will notice a difference
Should have done twins out the back
Hectic
Advance the fuel timing will help
Nice work be careful tuning is the biggest to keep a good eye on it and dyno them after I blew it up when I bought it it came from the west strokes td4.2td so 4.5 litre it was already tuned to (275hp 750nm 34psi boost) but a bad tune it was way too lean down low and mid range then over fueling to buggery at boost lifted and cracked the head grabbed a liner split the block. ( I Didn know about needing head studs instead of bolts over 20pound boost) I learned quickly
So thanks to Brett and the team Southern Engines Kembla grange they did a full re build for me with a awesome tune 24psi now head studs in for protection needs over 20psi especially when towing . (261hp at the wheels) egts dropped by 100degrees carnt stress on the tunings it’s a cost saving if you get it wrong and blow something up crack a head etc it’s costly
Safe tune heaps of grunt and decent air/fuel ratios now thanks to southern engines.
Keep up the great work men love the videos
I ran 38psi daily on my td4.2 for ages on stock head studs, never lifted the head. It's all in the tune..
@@KillerRingNeckParrot
What power is it making at that?
I put mine down to bad build and tune by the performance company that originally did the build. Plus always towing and loaded tools plus caravan for work van is 2575kg loaded No water then the Ute is always on or just over 😐 what it’s allowed depending what jobs I’m doing. Then when hunting it pokes about at idle all night.
If not hard towing and heavy all the time or off road only occasionally to remote places I don’t think I would worry about studs and go normal bolts but now and then having to rebuild again or becomes expensive and a set of studs can stop that big cost and down time
@@karloz83 250hp 750nm torque atw
@@KillerRingNeckParrot
nice and a awesome tune makes then a pleasure to drive keep up the great work. The td can be a great engine when tuned properly and with the right turbo/ pump
Set up
Is it legal to turbo aftermarket on your p’s in vic?
Is the patrol ever going to get a fresh lick of paint?
Fuel Governer hat would correct the fueling correctly.
Try to get hold of a boost compensated/aneroided fuel pump. You can't ever get your fuel right with a turbo on an N/A pump. You'll also get more power, easier starting and lower EGT's with a timing advance, as they're set pretty retarded from factory. If you do that before you intercool it, you'll then be able to monkey tune it like you just did with your EGT's when you eventually get one.
👍🍺
Are u guys in the Yarra Valley?
Loved the video as always. Quality content here on the tube. Surprised you didn’t get a 3inch dump pipe? Usually people love them for extra power and lower egts
Turbo already came with a 3” dump
@@jonesy1130 oh nice! 👍
where has the black GQ ute gone? bring it back!
You lads live near my grandparents, do yous know the nickname MacRae
HT18 aren't lazy turbos boss. Their designed to be powered by a boost compensated 11mm pump. a NA 10mm isn't going to tickle any turbo in terms of response, not without alot more boost and intercooling
Soot gets the moot