Making perfect PCB at home

Finished products • Video
I rarely use multi-purpose PCB. I usually make PCB from copper plate. It is beautiful, and works stably. Many team members often ask me how to make perfect PCB at home, so Today's video I will show you how to create perfect PCB from copper plate.
It consists of 8 basic steps.
Step 1: Cut the Copper Plate
Step 2: Clean the Copper Plate
Step 3: Transfer the PCB Print onto the Copper Plate
Step 4: Etch the Plate with FeCl3
Step 5: Remove ink with gasoline.
Step 6: Protect the PCB with turpentine solution
Step 7: Drill the PCB.
Step 8: Print the value of components (layer TOP)
All my projects are free, I design them on EAGLE 6.0. I uploaded it to Google drive. You need to use a web browser to download the file and open the file with winrar software (extract) on the PC. Open schematic file (.SCH) and PCB file (.BRD) with EAGLE software.
Hope you enjoy my videos and projects. Like, share and don't forget to subscribe to my channel. one more thing, thanks to everyone
Facebook group : bit.ly/CreativeElectronic
#Inverter
#12Vto220V
#PCB

[@PhdHung]

Make PCB 2 layer perfect at home
czcams.com/video/4TQP8G41Yow/video.html

[@kevindavidchamorrovega5959]

What is the model of your printer?

[@trankhacquyet23]

Are you Vietnamese?

[@seasun9940]

@@trankhacquyet23: Homemade "102" => có 1 không 2 => chỉ có người VN mới chơi chữ kiểu số này :D

[@lurkingcorsa10]

Deleted... Bro

[@behnamazizi9470]

Your tools and stuff make me feel like I'm watching an apocalyptic movie.

[@PhdHung]

:D

[@Elfnetdesigns]

Well in some places that would not be to far off..

[@koppo5657]

[@Adam-tk4fm]

Very clever drill press design!

[@PhdHung]

thanks

[@PhdHung]

Finished products czcams.com/video/ksk0an3RUfQ/video.html
I rarely use multi-purpose PCB. I usually make PCB from copper plate. It is beautiful, and works stably. Many team members often ask me how to make perfect PCB at home, so Today's video I will show you how to create perfect PCB from copper plate.
Facebook group : bit.ly/CreativeElectronic
#Inverter
#12Vto220V
#PCB

[@shoumikahmed6373]

Thank you very much.....

[@PhdHung]

thanks

[@anandkachale5187]

I have always used the glossy paper (not the same as you) but everytime failed to transfer the toner ink fully on the copper plate. Any suggestions? Does it have to do with the paper or the time and amount of heat applied during pressing it with iron. Please help

[@evergriven7402]

@@PhdHung I liked the video what was the rock you shaved off and mixed with the gasoline to make the terpentine ? Thanks

[@batticha462]

Great, the PCB, the drill, the simplicity, every things :)

[@PhdHung]

thanks bro

[@engineerkohat]

Wonderful creation. Great lesson on pcb manufacturing.

[@PhdHung]

[@princeedhwardhezmi6469]

Everybody is gangsta till this guy shows up with his drill press

[@diyexplorer8728]

Thanks for the step by step PCB making. Your designs were great!

[@PhdHung]

thanks bro

[@BootstrapParadoxd]

He made this in a cave, with a box of scraps!

[@jackstephens7222]

Iron man references on point

[@yusukeukikawa]

It make me smiles

[@gregupton6351]

Get rid of the constant bell rings ... once is enough ... esp. when there is not much other audio

[@PhdHung]

Yes, I will lower the volume

[@CRISCOL64]

you are by far the most talented man doing this PCB, I'm amazed with the final result, and your tools are from another world, I never would imagine to use a old PC fan to do a vibrator. 👏👏👏👏

[@PhdHung]

[@maninder1984]

Very detailed and well captured. Thanks mate and well done!

[@oscill8ocelot]

Man, I am impressed with the work you can do with the tools you've made :3 Really leaves me with no excuse to start doing cool stuff too - if I don't have the tools, I should just make them. =) Great work!

[@PhdHung]

Thank you, this is mini PCB drilling machine czcams.com/video/-jVms_y1N7I/video.html

[@PhdHung]

Finished products czcams.com/video/ksk0an3RUfQ/video.html
1500W inverter

[@tommyttk24]

So wonderful, in my company has many claim PCB to supplier. Your PCB very beautiful. Thank you for share.

[@PhdHung]

thanks

[@tubeforinsomniacs6157]

You ae the champ buddy, great job👍🏻👍🏻👍🏻👍🏻👍🏻👏🏻

[@therandomknowledgeenthusia8590]

That's really cool

[@liaskliask]

That's perfect!!!

[@PhdHung]

Thank you very much

[@impulserr]

Amazing job, great quality

[@scamper_van8470]

well thanks for sharing!!!
really appreciated!!!

[@PhdHung]

:D

[@daviherculano704]

Incredible!

[@PhdHung]

thanks

[@adityamahajan2289]

This is really best, awesome...!!

[@PhdHung]

thanks bro

[@gumnahs]

Awesome 👏

[@lesterpicar9815]

im a CNC engineer yeah its amazing that you can make holes manually but i wonder what will you do if this is a double sided PCB

[@user-vq8fn5zv1n]

Hi,What kind of paper is used for printing, and what is the name of the application used to draw the electrical circuit? Thank you

[@tamashamas6193]

Everyone agrees that your work is incredible! I'm at a similar place with my diy work in terms of tool availability, inspired by your ingenuity in making your own tools.

[@ayoubabdolahi8047]

thanks for your guide

[@PhdHung]

[@UnimaxTechnology]

All Good ...Thanks For Everything

[@allexandruprroca6713]

lovin it , one new subscriber

[@PhdHung]

thanks

[@jashimuddin6610]

i love you brother and your al of work. you are really king.

[@PhdHung]

Thanks, hope you enjoy it

[@stephenwarren6539]

In your opinion can you obtain finer smaller tracks from photo sensitive or just the ink style ? or do both style of etching give the same result ?

[@Juha-th3go]

amazing!!!!!

[@PhdHung]

thanks bro

[@narsingraokumbala6048]

Excellent workmanship

[@PhdHung]

[@CarthagoMike]

great pcb! :)

[@jbalanjorge]

Nice job !

[@PhdHung]

thanks bro

[@electronresonator8882]

others : "upload your gerber files"
Homemade 102 : "print your gerber files"

[@PhdHung]

I uploaded it to the group

[@DaSlotho]

wow...im impressed man...good job

[@PhdHung]

Thanks

[@OmeedNOuhadi]

Awesome, interesting technique! That drill press is just amazing. It is so sad to see people who cry that they need to buy all these tools to be productive, when I should have been thinking of ingenious was to improvise my whole life.
#ono

[@rockyrunner3102]

I do the same tricks for pcbs awesome awesome

[@OmeedNOuhadi]

rocky runner great. It’s nice to keep making your own tools if you don’t have any. keep up good work.

[@RAndrewNeal]

Yeah. Do you know what it costs to buy a little drill press for this purpose? It's unjustified. So I got a ~$20 drill press stand (for hand drills) and a ~$10 hobby motor that came with a chuck and bits, and I was rolling with a $30 PCB drill press, give or take a bit. The things that I already had though were pieces of rubber to make a spacer because the clamp on the drill press stand was too big, and a 12V DC power supply to power it.

[@freedomisfood6966]

good job.

[@manuelarias5049]

EXCELLENT VIDEO THANKS

[@PhdHung]

Thanks for watching

[@aravindadas567]

thank you very much.

[@PhdHung]

[@averagejoe845]

Page from Borland C++ 3.x manual ... brings back old memories.

[@PhdHung]

Yes, about 20 years ago :)

[@user-qp6gu3dn2h]

This is art

[@PhdHung]

thanks bro

[@alfihry]

Very impressed by the Drill press 😍⁠

[@blackEngineerr]

this fan was thougt so wisely, nice vibration mahine.

[@PhdHung]

Thanks

[@user-lg7if8zb2q]

Which cartridge are you using, new or refilled? What print settings do you set for your printer?

[@saisasank4560]

What is the material used on the table like some graphs may I know what is it and it's importance?

[@darmendelektro8652]

wow very nice..thank you so much...for tutorial

[@PhdHung]

thanks

[@ubtech2938]

What programs do you use for make the circuits and turned in to pcb ??

[@charlesworton4020]

Very nice work... excellent result. You might consider spraying the component side with a coat of white paint just before you transfer the component layout (step 8). This would allow the print to show up more clearly. But the result is excellent regardless. >Charlie

[@user-mc9rs5hg4r]

Verry good
thanks

[@PhdHung]

Thank you very much

[@user-ne7xk9ek4n]

👍👍👍 MOLODEC! SPASIBO!

[@learnfromideas5258]

Nice work buddy keep it up

[@PhdHung]

[@susantabandyopadhyay2758]

Very good show.

[@sylvainrossi731]

I wonder about the turpentine solution, is it really effective like a varnish ? No issues with soldering after ? Is it not flamable ?

[@rohit.nimkar]

Great work man. Can you please add the links for the drill bits and the dc motor chuck?

[@mohamadaldarwish6678]

Excellent work ... You're smart boy 👌👌🌹🌹🌹👍 thanks...✅

[@arduino2914]

Thanks, I'll try it with atmega🤖

[@PhdHung]

good luck

[@shoumikahmed6373]

Thank you very much....♥

[@PhdHung]

[@evandesliwijaya8572]

@@PhdHung gnjhffffyggghggggggggggg

[@MuhammadYaseen-vx5hw]

very nice..... your work approved that you are a real master.

[@PhdHung]

Thanks, hope you enjoy it

[@MuhammadYaseen-vx5hw]

@@PhdHung yes, of course.....

[@Pat-Van-Canada]

very creative, if someone gave you $1000 you could turn it into a million

[@PhdHung]

lol

[@fasihzafar7423]

wow... best tutorial ever watch....!!!

[@PhdHung]

Thanks

[@andrewmcfarland57]

Finally, a use for all my old, broken computer fans! - McGyver would be proud :-)

[@how787]

I can’t understand nothing here but I still found this very satisfying

[@PhdHung]

[@stephenwarren6539]

hello i have found 3 types of copper clad board - 1 standard - 2 photo sensitive - 3 pre-sensitized photo sensitive and im asking which do i need to get the same results as u did in your video?

[@PhdHung]

Just need copper clad board :D

[@Atetus94]

You are so cool, keep doing ;)

[@PhdHung]

thanks

[@cristibaciu40]

Best regards from România !!!

[@PhdHung]

thanks

[@divierteknia]

good work. i did some of them in the past, sun insolation, transparent printed sheet... and of course with permanent ink pen.
i use cheap sulfuric acid (salfumant) + h2O2 mix... 👍👌👍

[@valentinshakhin4265]

Мега-чувак!
эклектика эпох и технологий.

[@hepto100]

ЛУТ)

[@Elfnetdesigns]

Dialog would be nice.. For DIY homemade though it looks better than most I have seen on here which look like PCBs from the 1960's

[@PhdHung]

:D

[@esentertain6643]

You’re the best

[@PhdHung]

Thanks

[@justinwerstadt8916]

Nice Video, that fan though. 7:53

[@-a6833]

Any ideas on adding solder mask and then clearing out the soldering areas? Is difficult to find tutorials on that

[@PhdHung]

It's not difficult, I will make video tutorial

[@-a6833]

@@PhdHung That would be very awesome man, I'm looking forward to it!

[@versonolicia5373]

Nice work. Is it ink from the printer like the wet ones in the photo paper you had ironed to the pcb or is it laser printed/carbon copied. Thanks for the reply!

[@PhdHung]

I use the LBP2900 printer. It is a laser printer

[@adeshinaajibola5114]

Pls can you upload a tutorial on how to print component values on pcb (top layer)

[@wesiyadimaurisza]

Nice work

[@PhdHung]

Thanks bro.

[@zhengliang7761]

In China, we always prototype the two layers PCB with less than 1$ to manufacturer, after 24 hours PCB will be ready for delivery from manufacturer, about total 36 hours later we can get the PCBs in hand.

[@PhdHung]

yes, i usually hire factory to do pcb in bulk, but when doing pcb test. I usually do it myself.

[@mauriciozavaleta1223]

You could make pcbs for free but one thing that maintain people to still making pcbs at home is the shipping time and cost of the shipping is not the pcb price is the shipping. If you live out of china there is always a significant amount of time to wait until the pcb arrives , those times can be at least 1 month for america or one week but with a shipping cost of 30-50usd. If you can send me pcb's with one week $10usd shipping I'm yours.

[@deafkite638]

Also pcbs larger than 100×100mm can get pricey

[@petrsuchopar8136]

Hello, where are you from? Could I make a printed circuit board for the Sony mhc 3800 CD drive?

[@karthikdhanapal3144]

Awesome work!! , will this board require solder mask layer ... Please let us know..

[@mkkn3240]

Very nice PCB

[@PhdHung]

Thanks

[@arvindh13]

good work

[@PhdHung]

thanks

[@satd2024]

Very nice. I have also taken inspiration from you (you have very good skill to make PCBs only single side which is very difficult) and designing single side PCB and will make in home. Thanks for video which is very timely for me. By the way what is your job? You always busy in making projects one after another without gap. Very inspiring. Thanks.

[@cleitonakaspyda]

"wear your gloves" you should listen .... feels like your are leveling up your tech tree in a survival game but it's also so nice congrats!

[@shadyamy1670]

Nicely done....but would you pls let us know what is that brown colored rock like thing u r scraping and mixing with gasoline to protect the pcb

[@PhdHung]

resin of the pine tree.

[@dhruvsharma8315]

What value solder paste can be used for this?

[@aravindadas567]

which type of drill bit are you using?

[@azgardvine7898]

respect

[@rocamontana]

Until today, I thought that the circuits were filaments carefully printed into the plaque, now I know they print everything but the circuits, thank you

[@MrGoddly]

I'm more impressed by your tools than the PCB.

[@PhdHung]

Yes, thank you very much

[@harishkumar4150]

Sir ac line 220v se 6 run chaser ki gerber file mil jyegi kya . jisme 14 pin ki ic lagi hoti hai wo walior output pr 6 transistor pcr406 lage hote hai. Us circuit me ic ka no. Nhi mil raha hai kahi pr bhi

[@PauloSergioDiasCarmo]

The Best! Like from Brazil

[@PhdHung]

[@pedrofonseca6216]

já q vc é brasileiro, oq vc usou no lugar de turpentine solution, n sei qq é isso

[@PauloSergioDiasCarmo]

Eu quis dizer que este foi o melhor vídeo de PCB que já vi no CZcams e que eu sou do Brasil

[@PauloSergioDiasCarmo]

Mas tu pertinentes significa terebintina se não me engano e isso se encontra aqui no Brasil, deve vender em alguma casa de produtos químicos

[@pedrofonseca6216]

@@PauloSergioDiasCarmo Ah, não tinha entedido kkk, mas muito obrigado eu joguei no tradutor e vi q existe no Brasil em farmácia mesmo, e n é caro, só a gasolina que é ksjsksj

[@jumbo999614]

How do you cut the pcb? box cutter?

[@gershona.7268]

Pls help with the tutorial to make the drilling machine. Thanks

[@_paschka_king]

Beautifully

[@PhdHung]

thanks

[@emmaopoku7390]

Please which ink should I use for the printing

[@Harshfeudal]

Hay đấy! Rất rất hay!

[@PhdHung]

thanks

[@nanacinho]

I really like your drill press table, which motor did u use ?

[@PhdHung]

here czcams.com/video/-jVms_y1N7I/video.html

[@ucphu5377]

kỹ năng làm PCB của bạn rất tuyêt. 1 like

[@PhdHung]

[@kadianwilson8005]

Which software is used to generate the pcb?

[@elliesera2948]

I don't say this very often but the use of all of your tools borders on the creepy and I can't put my finger on why.. altogether, this was a very informative and intersting watch.