ASUS ROG Z690 Hero Quick Setup - DDR5 6400 Fix and CPU OC
Vložit
- čas přidán 11. 09. 2024
- Quick setup guide for the ASUS ROG Z690 Hero to do CPU OC and fix an issue running DDR5 kits at 6400 or above
_____________________________________________
If you need help to push the maximum performance out of your system join my Discord server here:
/ discord
If you want to support my channel you can shop in Amazon using the link below:
www.amazon.com...
Or be a Patreon supporter:
/ hardware_numb3rs
____________________________________________
Follow me on Facebook
/ hardwarenumb3rs
Follow me on Twitter
/ hardwarenumb3rs
Follow me on Instagram
/ hardware_numb3rs
My Twitch Channel: / hardware_numb3rs
My HWBot Profile: hwbot.org/user/...
You are a life saver man. i was getting so stressed with my pc. Thanks you man!
I recently got G-skill 32Gx2 30-40-40-96
with 12900K using XMPII setting even can’t normally booting. You really save my life thank you so much.😁
What did you do?. I have: i9 12900K + Asus ROG STRIX Z690-F + Kingston Fury Renegade DDR5 6400MT CL32 and from time to time my PC totally freezes and PC is not with overload.
@@danim1631 I did lots of check, removed ram and reinstalled it over and over again, Using MemTest86 check memoy condition. Asus ROG STRIX Z690-F memory support Kingston Fury Renegade DDR5 6400MT CL32 in Asus offical website list? and did u using XMPI or II setting in BIOS but still crash?if so you should watch this video learning how to modifiy mem parameters in BIOS.
@@zoo0602 Yeah I tested with XMP I and II and also XMP Tweaker (I have several options) but I didn't touch voltages. I will test with this video and see if it works, thx
@@danim1631 great! hope u can solve it.👍
Yeah I'm having this same issue same ram model the g Skill trident Z5 DDR5. No matter what I do this does not want to use both sticks
Telling people to set those numbers is irresponsible. Not everyone is using the same hardware friendo
Thanks for this video, looking forward your next one ;)
Thanks for the content Max, always good stuff :D
You have saved man!!! Thank you so much! I was able to boot my Pc at 5600MHz
So to update you, i bought a 14900k cpu as i had heard and read that the IMC (internal memory controller) on the 12th gen is often crap and that is why they wont run an XMP profile. But the 14th gen has now been polished and they are a lot better. As soon as i plugged it in it ran the XMP flawlessly, gaming, benchmmarks , you name it. Its the 12th Gen IMC - its crap and if your unlucky you get a crap one that wont run XMP. Ive tried four memory kits on the 14900k, they all run as they should XMP, none did on two 12th gen cpus i had , that ive now gotten rid of. This is all on my z690 Extreme board btw, i have two 32GB sticks running at 6400mhz no problem, gaming , benchmarking , all perfect and stable with the 14900k on XMP, i guess they have finally perfected the 10nm process now on 14th gen, at least this is what it points to for me and im using the 3101 bios on my extreme board.
Youll see for yourself. I was reluctant to buy a new CPU as its onyl about 15% faster than my old 12900k, but the big jump in memory speed and being able to run an XMP profile swung it for me and i took the plunge - it is the IMC on the 12th gen, they are poor and i was told this by an intel engineer before i pulled the trigger and bought one.
You have to tweak the voltages BECAUSE the 12th gen IMC is crap. You dont need to on 14th gen
Yes, I noticed that, this socket CPUs is luck based regarding IMC, pity, because the cpu itself rocks!
Im in this boat, trying to run my 4x32 6400 without luck. Currently trying again but im stuck in a look so itll end up booting in safe mode and i guess ill have to either use only 2 dimms or just turn off xmp. Its a bummer
@@jeffrockr Enable XMP II and lower the target MHZ by 200mhz. Unfortunately, you wont be able to get 4 dimms stable especially at that density at 6400mhz. I seldom can get my 4x16gb Corsair Dominators 6600mhz to game for about a day before encountering blue screens. I finally was able to get stable at 6000mhz. This is with a 13900k on the Asus Z690 extreme.
@@Chris-zf2xkhey man is there a way to contact you? I have the exact same set up and need to know if I can run games with 4 sticks of Ram (2x16) DDR5
Hello Sir, I have two questions for you: I would like to know whether to put in a mobo that has a DDR5 6000mhz RAM limit, inserting a pair of 7200mhz RAM and setting it for example to 5800 with the XMP profile from the BIOS; this Motherboard is about to start. I definitely have to set the Timings different from the default ones. Or would you boot the operating system in SPD and that's it? Second question: in an Asus B660M motherboard prepared with DDR5 RAM and with Intel 12th gen. I5 12500 CPU, Can it work with a pair of Cas type RAMs with 30cl latency? Or the Timing must be reset if bios doesn't detect them? Not all brands should work, even Non-QVL. Those who can try various types of kits know this. I hope you answer me. Advice? Thanks and have a good day
I have my XMP not enabled, I want to. But changing the voltage (playing with it) seems tricky to do and you have to remember what you changed in case it doesn't work....
Why is it not easier? Turn it on.... ready!!
having had an Asus Hero with a 12900k and gskill 6000 memory and also an Asus Extreme with 12900ks and corsair 6200 memory i can tell you that the 12th gen with ddr5 has been nothing but a pain in the ass, we are 6 months in now and the ddr5 has been a real load of aggro
I have z690 formula with gskill 6000 64 gb, game crash. Reduced speed to 5600 still some big game such as COD warzone crash. What speed should I reduce to? the voltage ram is 1.345. Thank you.
@@jinnakururu9466 id drop it to 4800 and try it.
you’ll find you can run it at 6000 if you only run two sticks sadly.
the whole ddr5 release has been a total f*ck up and i would never ever again trust an asus QVL
@@JohnOLooney I can run 6000 64gb but I think all games would crash to hell. I ran valorant in 6000mhz crash, reduced to 5600 is fine but a AAA game is crash to floor. Can I ask some question if I enable xmp 1 but reduced the speed but not the voltage is it fine? 🤔
Da hell? I entered bios setup and freeze in bios setting lmao. Is this with rams or wat.
@@jinnakururu9466 You cannot run 6000 mzh if you want to have 64 GB ram (four sticks) It isn't built for that or in that way.
32gb (two 16gb ram) is the maximum you can have if you want to run at 6000 mhz.
You need to know how it works technically. What you are doing is wrong and goes against the physics.
i heard a lot of ppl complaining about 6400 mhz not running stably on the z690 chipset and I am planning on building a new pc soon, so this video definitely helps.
Cpu IMC silicon quality is the main factor when it comes to Memory OC.
@@connor040606 also yes, but so far the biggest challenge is the motherboard, DDR5 is still new
@@HardwareNumb3rs Yea, on my Hero z690 bios 1403, I had to manually input the CL32 6400 settings. Xmp would not work.
Team Group DDR5 6400 40-40-40-84 runs flawlessly on the Asus Maximus Hero, on the current 1505 and last 3 bios XMPII. My rig has been running perfect no crashes or boot up issues for a year.
Because they run 64gb instead of 32gb (two single sticks) which is the maximum you can have to run at full speed.
It's not designed to run 6400 mhz with four 16 GB sticks. Remove two of them and run dual channel and it will run at full speed.
People has no clue how the memories works technically, thinking it can run at full speed at any number of sticks, but that's not how it works.
Thanks for this video.
I’m scared of messing with all that stuff in the BIOS
I have a 12900k, G.Skill Trident Z5 RGB 64GB DDR5 6400CL32 and I haven’t been able to get it to run stably. I can get it to boot, but it inevitably blue screens soon after boot. Anyone else have any luck with those parts?
I have the extreme mobo, x2 16gb same ram and for the life of me they don't boot on anything but stock bios settings. @4000mhz. Paired with. 12700k. Just put it together tonight and I'm hugely disappointed and saddened by this crap. I'm so frustrated.
@@TheIcePhoenixxyoull most likely be able to go to 4800 with xmp off. Just so you know. It defaults at 4000 but 4800 works and is stable with 4 ddr5 dims.
Still considering going back to 2 x 32 dimms instead of 4 and try to have them work with xmp
The delete button mash is back!
Wanted to thank you, as I just bought some 6400mhz CL32 DDR5 ram and my Asus z690-i, wasn't booting with just XMP II settings
Hey hey,
I have an asus b660-a ddr5 capeable motherboard with a new i5 13600kf cpu, also have 2 sticks of ddr5 6000mhz 16gb so its 32gb…
My system as you mentioned in the video only work and see 4800mhz.
I went through the process what you just showed in the video. Waited around 15 minutes but nothing happens after the restart, seems like no boot at all. I put the voltage from 1.35000 to 1.40000 V as my voltage was already 1.35000.
Any advice anyone?
Its just sad to spend more money on rams which not working as it should be.
Thank you❤❤
I have a ASUS rog strix z790 e. I did everything he said for the ram part and didn’t work. But! I got them to boot at XMP 6400mhz, what works for me was, instead of installing my ram on the 1-3 slots I change them to 2-4 slots. Motherboard book shows to install them that way so I did. Problem fix. Now am able to boot on XMP II with no problem. Please make sure your ram are install correctly when you do so, meaning they are tight down properly on the ram slot. Best of luck everyone
The recent versions of BIOS do not allow a return to previous versions How do we solve this problem?
Thanks for the video! Ik have the Z690 Hero with Dominator 6200mhz 32mb (2x 16). It won't go faster the 3200mhz. So I'm very happy with you video. I hope that a can use the memory at 6200mhz after following your tips. I let you know. First I have to downgrade te Bios. Thanks 😊 a lot.
hi, i have a i9-13900k ddr5 6400mhz 16x2 kit dominator platinum. v 3401 bios . do you have settings for this set-up? if not, what would u recommend
Worked great first try . Gskill z5 6400 12700k z690 hero
Your Voltage Solution worked perfect on my Z690-F Thanks. Maybe you have a solution for the 6600 MHz Profile ? Have the Corsair 6600 and I’m not able to stabilize them…
Asus ROG Strix z690f with 64Gb Corsair vengance 5200 memory (2 x 32Gb) running without issue. XMP1 enabled. Planning on doubling up on the ram, but scarred to spend the money now after reading about all the 4 slot issues.
Did you buy the 128gb? :) I want to do that but I am not sure
I have the same thing. How were you able to get it to work? Did you folloe his instructions? I have been trying to resolve this issue for the past two days. Thanks
@@sleick20i have 4x32 and cant go past 4800 xmp off. Anything else either wont boot or will bsod
hello, under € 350 what is the motherboard that barricades / limits less the (high) frequencies of the DDR5 RAM? With the highest maximum frequency limit of the RAM, which supports the highest possible frequency in OC pushed DDR5 (with top-of-the-range CPU and RAM working at higher frequencies than those generally supported by the Z690 mobos, which therefore in this case could represent a limit and block / run RAM and CPU at a lower frequency than the max they could reach, unless we are talking about Asus Apex or very expensive mobos), then mobo that does not impose a frequency limit on CPU and RAM and letting them work at their high frequencies. I foresee in the future to probably put an i7-13900K (keeping the same mobo) so the only thing I need is that it is a model of mobo that lets CPU and RAM work at very high frequencies without barricading and not limiting CPU and RAM to the limit frequency of the mobo. With high max frequency limit (the one indicated by the manufacturers in the data sheets), but above all true in a real scenario, because I see that in the data sheets some models have indicated 5333MHz, others 6000MHz, but some say that all mobos with 4 DIMM / slot RAM barricade / limit all to 6400MHz (frequency of ddr5, even if these and the CPU could theoretically work in OC even at a little more than 6400MHz), hoping that this is not true, I am looking for a mobo suitable for OC pushed RAM, the goal is to try to bring even more mature ddr5 banks that I will buy in the future (with 13900k having better IMC and SA) at the highest achievable frequency, perhaps between 6500 and 7000MHz.
After upgrading MB/CPU to z690p-d4 and 12600k, I got vrm coil whine issue. Is it ok for 12 gen MB and CPUs, or I got defective sample? All other PC parts are same and I got no coil whine before upgrade
Top max❤️💪
will this work on AM5? I can't get my gskill 6400 to work ( Asus tuf x670e)
can you do the same thing again but for raptor lake? right off the start it's able to run 6400
I have a Asus rog 650e-e , how to setup this RAM in the BIOS ?
Hello i have actually 2X 16gb 6400mhz Gskill that works great and i would like to go with 4X16 go but i m not sure it will work at 6400 for 4X 16Gb ?
I heard that Asus z690 hero motherboard have some problems.Is it okay to buy this board?
With the bios I show here up to 6600 this board can run stable if is the affected 2021, if a 2022 it can go even more, so I see no issue, is it a great board, go for it 😀
Exactly what model are these RAM on 00:30 ?
Hey, great video. QQ. I have a Z690 Extreme and all of a sudden with 4 sticks of 16 GB DDR5 6400 ram the unit does not boot and i get a "detect memory" issue on the board. Take one stick out of any bank and the unit boots. Trying to avoid having to go through an RMA, but wanted to see if you could help? Thanks!
Did you make any progress? i installed 4 sticks of 6400 and can only get it to boot at 4000mhz, will try the settings in this video in a little while to test.
i tried your preset.I have the ASUS Z690-G with 12600k and HyperX beast 2x8 DDR5 6000mhz and finally my pc post.But i have an issue...im passing memtest from bios but im crashing on every games.I dont know why..My temps is perfect and my 12600k is completely stock.Also i disable C State from bios but nothing.Is any other setting that i need to change?Thank you in advance
@Cowboy63 first of all chagne the bios with 1304.Secondly let 12600k stock with MCE enabled,speed step enabled and speed shift enabled from bios.After try this settings..after choose XMP I 6000mhz and change the speed with 5800 mhz,change system agent voltage to 1,20 and VDDQ and VDD to 1,43. Run memory test pro 700% at least and lin pack extreme 40 passes. i cant use my XMP 6000mhz because my 12600k not have enough memory controller power but after hundred of hours i make it to run completely stable at 5800mhz cl 28-34-34 with sub timmings foul tight without any crashes and i passed also prime 95 large FFTs for 24 hours without error.Right now im faster than 6400 cl 32 ram on super pi and my latency is 58 on aida 64.Let me know and im gonna help you.Every setup is different but i know very well the ASUS z690 motherboards and i learned a lot the last few months about DDR5.
Your CPU max sopport aspeeds Up to DDR5 4800 MT/s, Up to DDR4 3200 MT/s
Hi i have problem not see bios with displayport only with hdmi please help! Thanks
i have problems of my kingston fury ddr5 kit 5200 4dimms i cannot boot if 4dimms
Any tip on how to make stable see to get error on memtest
my motherboard stops at orange light and turns off, i have 32 gb from teamforce ha 6400 . my motherboard is a z690-f gaming. It doesn't even open the bios. do you know what it would be? I set up this setup today and I'm discouraged. thanks if you answer.
Had the same Problem, just male a bios flash with the usb
It would Work on MSI pro z690?
please, I have ASUS z690 prime. c an it run 64gb corsair 6400 cl32?
Any idea how to tweak the settings for 4 x 32 6400 ddr5 dims, my pc couldnt boot with the infos on this video
change the dram frequency to 6000mhz that's the maximum it will work on
Hi, I have i9 12900K + Asus ROG STRIX Z690-F + Kingston Fury Renegade DDR5 6400MT CL32 and from time to time my PC totally freezes and PC is not with overload. Someone told me maybe it´s because 6400 is too high and that I should test first with lower speed values... what voltages or settings do you recommend for that RAM? (it has Hynix memory). Thanks!. EDIT: And again freezing with modules in 6000. WTF...
Your cpu support max Up to DDR5 4800 MT/s.
how about making a Raid 0 on a z690? make a video of that please!
It is pretty easy to do, but with the actual speed of Gen4 NVME why should you need a raid 0? I'm not a big fan of the 0, doubling the chance of failure isn't great
ddr5 6400 on the MSI z690 MEG Unify works perfect! @6600 G.SKILL Trident Z5 Series 32GB (2 x 16GB)
I’m not really following you, the current bios 1505 and the last bios for this Mobo ran xmp II and ddr5 6400 perfectly and with a memory controller voltage of 1.1v. I have TG DDR5 6400 and it has been running flawlessly, maybe it’s your ram. My ram is set to 1.35v. MY CPU is a 12900K. Regardless good video just FYI
I have to try the new bios, but the old revisions of the board plus old versions of bios have issues, with the same components on the Evga Z690 Kingpin I can run the ram at 7200 C32 stable, so the board have definitely some issues 😀
@@HardwareNumb3rs what mobo revision? I have revision CO per CPU Z, I have had no issue with bios 1505 and 1403
I dont have your ram but so far I cant boot anything higher than 6400 with my TG at stock XMP II settings. I would love to get 7200 but Ill take 6600 if I can get it stable.
What a shitty bios as you need so many RAM tweak to properly work! I cant understand if this is a Motherboard or cpu revision problem! Latest BIOS available 2004 remove fall back possibility due some ME tweak.... and this is true for ALL lga 1700 ASUS MB
vs 5800x3d LN2 please sir
5.3 tops 🤣 shits garbage
Unfortunately this one is locked! Only small OC via bclk 😔
Your i5 12600k as better SP rating my i7 12700k 😆
This guy doesn’t know what he is doing. I just spent so much time tryna figure out what is wrong with my pc and why I’m getting such trash fps. It’s cause I used these setting. As soon as I went back to auto everything back to normal.
Help! My ddr5 5400 not working in xmp, did all like in this video nothing works
Sorry 5600mhz
@@rusomuso Z690 Hero? What ram kit is it?
@@HardwareNumb3rs asus rog strix z690-f motherboard and kingston fury 32gb 5600xmp
cpu 12900k
but in 5200 xmp its stable but i want 5600
I've sent you an email.... no response yet
Going to check right now! Sorry!
1st
This guy doesn’t know what he is doing.