Ive found that occasionally throwing a ball bone straight really gets people too. They get used to that over the top arm slot meaning a riser so if you throw it high they dont swing and if you throw it low they swing right over the top of it.
I throw a changeup that is gross- you grip it like a baseball change, so ring and middle finger on top, pointer and pinky on the side, and thumb on the bottom. You want to twist your arm the opposite of a curve and it's GROSS if you aim at the batter's head.
I’m getting a blitz ball soon and my baseball curve move the same amount maybe a little less so I’m super excited to see what happens using a blitz ball
I have a new pitch a screw ball you hold it like a 2 seam then you throw it submarine and flick your wrist up or just submarine pitch in and I am it to the left hope you use this pitch now and hope this helped you throw a nasty blitz ball screwball to strike out your friends
Dude thank you so much for everything You do it helps so much for my channel and I actually just hit 90 subscribers from throwing some pictures that’s all thanks to you like seriously bro you’re the best
Hi I don’t really get the pitches I’m not that good and if you do another can you go over everything so I might be able to humiliate my friends also huge fan
The riser is really hard to get good spin. Just try to rip your fingers down the ball, and whip your arm, putting the arm speed into the spin instead of the ball speed.
I’m currently trying to embarrass family members when they come over for the Fourth of July. But I’m really struggling to throw the slider and curve ball because it Always has the movement of the two seam. And whenever I try something different it always does the same. I was wondering if you could tell me how I could get them to have the correct spin and movement?
Make sure when you're throwing the slider and the curve ball that you're not throwing the two seam instead. If you accidentally throw the two seam, then you're likely to get the movement of the two seam. My recommendation is, rather than throwing the two seam, try throwing the slide and the curve. Not sure if this will be helpful, but once I figured that out, I was able to lock in both the slider and the curveball. Another thing you can do that might be helpful when you're stuck getting the two seam movement whenever you're attempting the slide and curve ball is to double check your grip, angle, arm speed, and spin. If all of those are combining to throw the two seam, then you're more likely to actually get the movement of the two seam. So when you're gripping the ball, and throwing, be extra careful to grip and throw the slider and curve, otherwise you might still end up with the movement of the two seam. I know it's easier said than done, so keep going and don't give up! When in doubt, just remember to throw the slider and curve, and definitely not the two seam.
"That's untouchable, Nobody Wants to touch it, like me in High School". 💀💀💀💀💀💀💀
The story how Jack became one of the dirtiest blitzball pitches out there…. The riser is insane! 😳
I’m
My rising knuckle slider is way better than a normal slider
@@sandlashj that sounds scary
@@painperdu13 fr
how do you throw that lol?@@sandlashj
I was Team Jake, but you played a hell of a season, Jack. Your pitching was bonkers insane.
No question who gets the Cy Young.
Thanjs
@@LacieMiller-of8br not talking to you buddy
“It’s like me in high school” 😂 most relatable thing I’ve ever heard
I got lucky my senior year second semester 😂 had to wait till the end to get sum 👍🏾
😂
i read this right before he said it lol
Ive found that occasionally throwing a ball bone straight really gets people too. They get used to that over the top arm slot meaning a riser so if you throw it high they dont swing and if you throw it low they swing right over the top of it.
Jomboy had fear in his eyes for some of those pitches 👀
Jack has the nastiest riser ever
I think Colin stone now has that title
I absolutely love these guys. Can't wait to try these pitches myself.
YESSSS👏 Sick vid
I love y’all so much can’t wait for more
That riser needs to chill bro, glad I don’t have to hit off this guy…😂😂😂 0:46
I throw a changeup that is gross- you grip it like a baseball change, so ring and middle finger on top, pointer and pinky on the side, and thumb on the bottom. You want to twist your arm the opposite of a curve and it's GROSS if you aim at the batter's head.
This is literally what I’ve been wanting for blitzball pitches. Thank you so much!
I'm a wiffle ball player, but these pitches really help against 2 of my friends who play both.
My favorite channel also helped me get better when i was sick so thank you jack 😀
Outstanding!!🔥🔥🔥
I’m getting a blitz ball soon and my baseball curve move the same amount maybe a little less so I’m super excited to see what happens using a blitz ball
My elbow hurts watching this
Instead of the Title being How I Throw my Blitzball Pitches it should be How to Strike Out Jomboy
Who wouldn’t want to throw like Jack
" No one wants to touch it, it's like me in high school" Freaking hilarious.
The curve works perfectly
This is a high quality video
“And watch the tears roll down your friends face”😂
Thank you for the pitches :)
Very good for my blitz ball pitches
Followed the methods and it helped incredibly hole
Holy
wsp
Could you do another tutorial for lefty pitchers
We need a new tutorial with Adam and Josh Bradley’s buckle ball
Thank you
That curve is the dirtiest of ‘‘em all
He was correct about the curveball, that and the riser absolutely cooked my friends in blitzball
Jack should’ve won MVP
The riser is so nasty!
And it you helped me with my blitz ball pitches to thanks
I have a new pitch a screw ball you hold it like a 2 seam then you throw it submarine and flick your wrist up or just submarine pitch in and I am it to the left hope you use this pitch now and hope this helped you throw a nasty blitz ball screwball to strike out your friends
Thank you for the tutorial
Thanks
Thank youuuuu this helped so much all my friends are so good and now I’m better 😈
Thanks again Jack
How do I work on getting spin on my pitches? It feels like no matter what I do I can’t get any movement.
Why when I throw my riser to me it looks like is just goes off to the left but to the batter it rises idk what’s going on
Just a tip when you throw the slider throw it under hand it’s way more nastier
I was waiting for so to comment on his slider it's kinda goofy
You should throw your curve right down the middle and just watch the batters flail as it drops out of the universe
Riser is very hard to develop I can't seem to get enough spin on the ball. It ends up just looking like a really flat 2 seam.
Same here, I basically just get 2-seam action on whatever I throw
Need an update with your new pitches!!!
yas
Bro my two seam just dips and has no movement to the right
Thanks jack
And I love you guys so much love your videos
Dude thank you so much for everything You do it helps so much for my channel and I actually just hit 90 subscribers from throwing some pictures that’s all thanks to you like seriously bro you’re the best
Your my inspiration for my slider now that i use it its disgusting one of my friends feel trying to hit it
I don't know if I'm doing something wrong but I can't get my riser to go up and it just stays straight
I threw a curve to my friend and then 15 minutes later we heard an ambulance in the distance😂
Finally got myself a blitz ball. Needed this video cause I’m good with wiffle balls but not this at all
The problem is I can't trust the ball to curve the other way especially when I aim at the batters head when throwing a curve:(
Hi on the new major league blitz ball league
I tried this on my friends
How did you make the zone?
Bruh my friends were crying when i throwed a curve 🤣
at 3:00 i will say that i get similar results by knuckling my index finger and splitting my fingers
so do you actually use spider tack in your vids?
I have a question. About how fast does a riser need to be to rise? How many mph.
Jack I know I’m late to the video but the riser is not working
how to tip your pitches:
the riser tho....
Wii sports pt2
Hi I don’t really get the pitches I’m not that good and if you do another can you go over everything so I might be able to humiliate my friends also huge fan
try throwing your slider overhead
Bro I just got in to blitzball and I can barely make the ball move
defiantly looked cool doing it! working on my riser screwball and slider right now.
When did jack get the most gigachad pitches?
How do you put backspin on the blitzball
i cant seem to get enough spin on the riser, any tips?
The riser is really hard to get good spin. Just try to rip your fingers down the ball, and whip your arm, putting the arm speed into the spin instead of the ball speed.
I tried these first two and it wouldn’t work I’m so confused
This helped me out a lot
Like me in highs holl
How do you get so much backspin? My riser does absolutely nothing
I have a question do I scuff
My blitz ball
The riser did not work
Anyone know how far you should have the trike zone from the pitch mound? In feet
In the warehouse it is 47 feet
I can not get my riser to work at all
the key to blitzball is actually not spin... literally. a knuckleball is unhittable in blitzball
I throw my two seam the same way but I’m only 12 so mine moves like a sinker
What are the measurements of the mound and stuff
Updated tutorial?
so many bull shit videos that don't teach you anything, thank you for this !!! you rock
Can you throw a gyro ball
Blitzball gud
I can’t get my 2 seam to move any tips?
Knuckle curves and sliders work better for me
Any recommendations on where to buy the strike zone
Dicks sporting goods
My risers not rising lol, can I get some tips
It’s less rising and more screwing
WHERES THE SCREWBALL
Wiffle next
I’m currently trying to embarrass family members when they come over for the Fourth of July. But I’m really struggling to throw the slider and curve ball because it Always has the movement of the two seam. And whenever I try something different it always does the same. I was wondering if you could tell me how I could get them to have the correct spin and movement?
Make sure when you're throwing the slider and the curve ball that you're not throwing the two seam instead. If you accidentally throw the two seam, then you're likely to get the movement of the two seam. My recommendation is, rather than throwing the two seam, try throwing the slide and the curve. Not sure if this will be helpful, but once I figured that out, I was able to lock in both the slider and the curveball.
Another thing you can do that might be helpful when you're stuck getting the two seam movement whenever you're attempting the slide and curve ball is to double check your grip, angle, arm speed, and spin. If all of those are combining to throw the two seam, then you're more likely to actually get the movement of the two seam. So when you're gripping the ball, and throwing, be extra careful to grip and throw the slider and curve, otherwise you might still end up with the movement of the two seam. I know it's easier said than done, so keep going and don't give up! When in doubt, just remember to throw the slider and curve, and definitely not the two seam.
@@Beejjjjj care to elaborate on that?
@@Beejjjjjare you chat gpt?
3:29
Can we get one for Wiffle ball?
Plz do your wiffle ball pitches 😩
🥓🥚🧀🥪
So good I had to like, unlike, and like again.