The Rubber Company supply wet pour safety surfacing materials. We also provide a professional installation service. Here is a video of a wet pour installation to show you the main steps! www.therubbercompany.com
Would this kind of product be suitable as a floor liner in a crawlspace that houses mechanical equipment? I would install it on top of a 12mil poly vapor barrier. Is the product sufficiently fire resistant for that application? I'd need to cover 1400 square feet.
They were very responsive with their reply message below, but I did not give the specifics and did not seek the quote. My client decided to go another route.
Nicholas H aah ok. I was just checking out youtue on the product. A contractor here in Connecticut left a flyer in my mailbox. I never heard of a rubber driveway before. Thanks for answering.
Hi Nicholas, In order to provide you with a materials only quotation we would require: 1) Colour 2) Thickness (is there any play equipment that requires a certain CFH/thickness) 3) What is the sub-base you will be installing on to? 4) Delivery location If you could email us this information to sales@therubbercompany.com We would then be happy to quote.
Would this kind of product be suitable as a floor liner in a crawlspace that houses mechanical equipment? I would install it on top of a 12mil poly vapor barrier. Is the product sufficiently fire resistant for that application? I'd need to cover 1400 square feet.
is the ratio measured by weight or by volume?
Volume will be the most accurate. It is recommended to use a measuring jug or bucket for the granules and binder.
Is this a better alternative to regular asphalt?
what kind of primer we can use over the concrete ?
How much would it cost me to do a 25x 22 ft area if I do it myself?
+Nicholas H did you get a reply, how much was the quote?
They were very responsive with their reply message below, but I did not give the specifics and did not seek the quote. My client decided to go another route.
Nicholas H aah ok. I was just checking out youtue on the product. A contractor here in Connecticut left a flyer in my mailbox. I never heard of a rubber driveway before. Thanks for answering.
And what weight is the roller you using if I may ask
What size crumb do you guys use ?
Is there a Rubber Company near tampa Fl. ?
Hi Nicholas,
In order to provide you with a materials only quotation we would require:
1) Colour
2) Thickness (is there any play equipment that requires a certain CFH/thickness)
3) What is the sub-base you will be installing on to?
4) Delivery location
If you could email us this information to sales@therubbercompany.com
We would then be happy to quote.