Oil Pan Gasket Installation -Fel-Pro Technologies, SnapUps and Proper Use of RTV | Fel-Pro Gaskets
Vložit
- čas přidán 6. 09. 2024
- Fel-Pro Oil Pan Gaskets are designed for the repair environment, to help seal imperfect surfaces and help with the installation process. To learn more about Fel-Pro technologies, SnapUps® installation aid and the proper use of RTV, check out this video featuring Technical Product Specialist Mike Hinderer and ASE Master Certified Technician John Gurnig of the Fel-Pro Field Test Garage.
John starts by discussing the Fel-Pro PermaDry® and PermaDryPlus® oil pan gasket application-specific technologies. Then, Mike and John demonstrate how Fel-Pro’s SnapUps installation aids save time when installing an oil pan gasket and wraps up by showing how to properly use RTV during the installation process. Experience the Fel-Pro Difference and see why we are The Gaskets Professionals Trust™.
Feel free to share this video: xxxxxxx
Like us on Facebook: / felprogaskets
Follow us on Instagram: / felprogaskets
For informational purposes only. We are not liable for any damages resulting from your reliance on this content.
Tags: Fel-Pro, Fel-Pro Gaskets, Fel-Pro Difference, The Gaskets Professionals Trust, Designed for the Repair Environment, Fel-Pro Oil Pan Gaskets, Fel-Pro Oil Pan Gaskets with SnapUps, Fel-Pro PermaDryPlus Oil Pan Gaskets, Fel-Pro PermaDry Oil Pan Gaskets, Oil Pan Gasket Installation, How to Install Oil Pan Gasket, Gasket Repair, Proper Use of RTV, Oil Pan Gasket Installation Tips, SnapUps, Gasket Leak Repair
Snap up's are a life saver!!
These SnapUps are really, really...REALLY nice. Especially if you are crawling under your car on wheel ramps laying on your back trying to line up the gasket and put bolts in also trying not to smear the spots of RTV on those areas they were talking about everywhere. It's better than an extra set of helping hands because it lines it right up and holds things perfectly in place on all 4 corners.
John Gurnig is the best. Real-life experience in vehicle service industry, now applying his expertise to the validation of Fel-Pro technologies so everyone can be sure they'll do the job the first time.
I got 439,906 miles on my sbc 350 using your gaskets, their my go to for any build
FelPro is good stuff. On the BMW n54 their valve cover gasket "the blue one" has 5 ridges compared to the others which only have 1 or 2. My buddy and I replaced ours at the same time. I went with the felpro which was slightly bit more in cost and he went with another brand. 3 years later his is leaking again. LOL
You have to be old to know the phrase " A little dab will do ya." Helpful video thanks.
Yes, I caught that too. Age here is 76.
Brilcream
@@user-ds9zd8eq6u Brilcream, butch wax and baseball cards
Really wish you guys made the one piece neoprene blue pan gasket for a 2.2 s10, cavalier, Sunfire etc. Cork is terrible
I currently got that second gasket plus on my 302 rebuild. Nice gasket.
Sold! Thanks for the assist.
Always 👍👍
Please make a permadry plus gasket for the ford 4.2l V6
@ Fel-Pro - guys I just bought your transmission pan gasket for my Sequoia. Going to do the work tomorrow. The surface of the pan is completely flat, so no RTV at all then, right?
Thank you ............ good job
Key points..step..90deg joint
Do you make this type of oil pan gasket for the continental F-162 and F-163 used in Lincoln welding SA200 machine.
what is the best rtv to use with these gaskets on the corners
Hello my dipstick is broken in the motor I would like to know if I can remove the rest of the tube by the oil pan?
That’s awesome v
Why doesn't Fel-Pro make an oil pan gasket for a 7.3 powerstroke?
Hi John and crew, thanks for the video. Do you put a dab of RTV on the PAN SIDE OF THE GASKET as well where the 90 degree joint comes in? I tried the method of using RTV just against the block with the Fel-Pro rubber gasket and it failed in that area. Tried tightening to no avail (in fact made leak worse). Have a new gasket with a new pan and would like to get it right. Thank you!
Typically just block side
Before Id consider using RTV which is reactive to mineral oil Id use Hylomar.....
Can I purchase these snap-ups for specific vehicle models?
They go by thread diameter it seems like
How do I remove a freeze plug made of rubber
Fel Pro gaskets yes. RTV no. Permatex No 2 all the way. Remove old gasket then use chlorinated brake cleaner on gasket surfaces until clean. No 2 is forgiving where RTV is not. Like putting in a silicone booger that will leak over time if there is any residue on the gasket or surface. Just my experience.
& the way the other dude says, “conversation”. I just hear Bobby’s World… “Now, don’t-cha-know-Baaahbbi…”
Replacing my 99 CRV Oil Pan gasket. The previous mechanic globbed RTV on everything & it leaked everywhere.
Did you get yours fixed? I had the same thing happen to me.
Whats the link for a small block chevy oil pan gasket??
I would like to know that also haven’t had a reply to my email ? I also found out there’s a thick and thin front seal
I would like to know as well , please
It depends on whether your dipstick is on the drivers or passenger side of the car
They do make a universal one though. Just search felpro sbc oil pan gasket and look for the “rubber with steel core” one
Do u put rtv on both side are just 1side
The gasket comes with instructions. The instructions say only on the block side
just a dab ba dab doooooo!!!!
To bad fel pro don't make a 1969 oldsmobile 442 400 ci oil pan gasket one piece
Should have installed upside down motor
Are these gaskets reusable?
Broke ass
It would be as easy as that if the engine could flip it over like that. But you can't.
Less is more. Ask me how I know. ⭐⭐⭐⭐⭐
Can I reuse my gasket ?
what do you think
How poor can you be
How about designing a $50 oil pan gasket that does not require that lousy RTV??
He explains why you need rtv pretty well in this video.
@@Shoorit I'm well aware of why RTV is needed, I've built engines for 30 years. If you still have to use it with a gasket that costs more than an entire set does the expensive gasket is pointless. The cork and rubber 4 piece gasket works fine if you slobber RTV all over it.
@@michaeljamison8254 I’m not sure why the cost is so high, but did you see the special clip things that hold it in place?
Well there is always going to be slight variation in machining surfaces. Hard to make a gasket that can be perfect when the item they go on can vary in imperfection.
Note: if the pan is flat (with no step ups) RTV is not needed. Only on mating surfaces that are not a flat plane
Buy the moroso, felpro always leaks
I really hate the way you say gasket, lol.