Just got mine done today I went with the 2 1/2 inch spacers and like yours I have about an inch and a half difference from the front to the back,but it looks 100% better
I have a 2021 platinum F150. I just installed 3.5" ready lift kit with 35x12.5x20 on 20x9 +16 wheels. I only had to trim about a quarter inch of plastic. No rubbing, no cutting crash bars etc. 20x9 with Zero offset would require way more trimming. I know +16 wheel is MONEY and +18 should be no different. I'll upload a video about it.
Love your truck, it's beautiful. I'm biased as I have the same exact model (Antimatter Tremor)! Getting my leveling kit installed tomorrow and I can't wait. Thanks for the video!
Hi, I added a fox coil over leveling kit on my 2008 Ford f150 and I prematurely wore out my new tires unevenly. I didn’t realize that I needed to buy aftermarket, upper control arms because i changed the angle. I bought BDS UCA’s. I also had to get an alignment. Nice truck!
Omg south Texas.. I saw 361 cctx.. I live here too.. I love ur truck been looking into getting one and away from Chevy… we got to meet up show me the truck I saw one at the dealer shop on Ayers I’m iffy cause I’m used to Chevy.. hope to hear from You
Just got my 23 tremor , and would love to get it leveled, can you please tell the name / brand of this kit and how to get it , thanks mine is silver 402
A leveling kit I looked at for F-150 Limited said the kit won’t work with BlueCruise. That’s a show stopper for me. PS: am curious on your kit how much deflection angle did it introduce when lifted a bit?
love the truck! i just bought a 2023 Tremor. i am having the dealership put a leveling kit on also. do you know what size you used? 2.5"? also did you change your tires from factory? i am unsure what size i can go up to? 34's? 35's? i am hoping the leveling kit does not change the ride? any complaints?
To be honest, I knew I wanted spacers and the shop I used said he need to call his distributor to see what he can use for the Tremor because you can’t just put a normal leveling kit on. I’m not a lift or suspension expert but apparently with Tremors or TRX or any upgraded suspension set up you have to have preloaded spacer because of the programming between your back and front tires and how it communicates has to be set up correctly and pro comp preloaded spacers can handle it. Again I’m not the expert but that’s what I was told because at first he wasn’t sure about touching my truck because he didn’t want to mess up my setup. I’ll have to get back with you on more of the info
@@jaxxdoe6767 Thanks for the info! That's what my dealership told me as well. They need to use the pro-comp preloaded spacers or the more expensive fox 2.0 coilovers..
Not trying to stir any argument up or anything like that but you can in fact install any 2 inch or 2.5 inch spacer for 2015+ f150s onto a Tremor. Lots of websites are telling people that you require a “specific” but that’s false. I’ve installed several of these spacer lifts now
So eventually I plan on putting 35’s but I’m in trouble with all the ads ons I have already bought lol so I think I will be waiting til I pound these down and I have to buy new. Without a lift of the leveling kit I don’t think you put on 35’s… it would be tight. I’m am going to do a video on the ground clearance. And no I don’t think I am going to put a lift on her… she is tall already, like the bed of the truck is to my shoulder and I’m 6’ with my shoes on.
@@jaxxdoe6767 35s would fit, but you’d need to do 285/75r18s rather than traditional 35x12.5x18 size. Difference is simply the former is an inch narrower than the latter, and the clearance issues lies with the width not the height.
Looks great!! 1" lower in front is perfect, most leveled trucks have the appearance that the rear is lower which sucks IMHO, I have the same truck and I'm not leaving it, when you actually use the truck for it's intended purpose, like hauling max payload in the bed or towing a trailer, it sits pretty much level
I just ordered a 2023 f150 tremor myself! Can’t wait for it to come in. As far as a levelling kit I decided to go with Rough country 2.5inch!
Did your blues cruise stop working or does it still work?
Lol thank you me too!!! I’m very happy with my purchase
Keep the videos coming I’ll be doing some of the same things to my truck when it get here in a couple of weeks
I absolutely love that truck
Just got mine done today I went with the 2 1/2 inch spacers and like yours I have about an inch and a half difference from the front to the back,but it looks 100% better
I have a 2021 platinum F150. I just installed 3.5" ready lift kit with 35x12.5x20 on 20x9 +16 wheels. I only had to trim about a quarter inch of plastic. No rubbing, no cutting crash bars etc. 20x9 with Zero offset would require way more trimming. I know +16 wheel is MONEY and +18 should be no different. I'll upload a video about it.
That’s where I had my leveling kit done on my 2018 platinum
Love your truck, it's beautiful. I'm biased as I have the same exact model (Antimatter Tremor)! Getting my leveling kit installed tomorrow and I can't wait. Thanks for the video!
Looks awesome! Beautiful truck
Sweet! Got a ‘23 ordered, just a few months to go
Hi, I added a fox coil over leveling kit on my 2008 Ford f150 and I prematurely wore out my new tires unevenly.
I didn’t realize that I needed to buy aftermarket, upper control arms because i changed the angle. I bought BDS UCA’s.
I also had to get an alignment.
Nice truck!
Beautiful truck I would buy the exact same way. Good luck with it. Color is nice wheels nice perfect
Beautiful truck.
Great looking truck.
Looks real nice!
ordered mine this week.
Omg south Texas.. I saw 361 cctx.. I live here too.. I love ur truck been looking into getting one and away from Chevy… we got to meet up show me the truck I saw one at the dealer shop on Ayers I’m iffy cause I’m used to Chevy.. hope to hear from You
Right on we could totally meet up. Here is my email address(I don’t want to put my phone number up on here. Jacquethegreat@yahoo.com
@@jaxxdoe6767 I sure will I just did..
Just got my 23 tremor , and would love to get it leveled, can you please tell the name / brand of this kit and how to get it , thanks mine is silver 402
So would you say it takes a 3” level kit to have it perfectly level?
Looks great. I also don't like the factory rake.
can i ask with stock tires and rims. How' mpg after installing the levelling kit> Please
A leveling kit I looked at for F-150 Limited said the kit won’t work with BlueCruise. That’s a show stopper for me. PS: am curious on your kit how much deflection angle did it introduce when lifted a bit?
love the truck! i just bought a 2023 Tremor. i am having the dealership put a leveling kit on also. do you know what size you used? 2.5"? also did you change your tires from factory? i am unsure what size i can go up to? 34's? 35's? i am hoping the leveling kit does not change the ride? any complaints?
can you now fit 35x12.50r18
Ok. But it's not complete. You need 34" tires, long mirrors and a moose bumper with light bars in place of the factory one to complete the looks
love the wind lol , how did you adjust your headlights ?
Wish mine would have came ....but tired of waiting for more delays
What color and package did you get?
Gorgeous truck! How much?
Whats the benefit of the leveling kit? Just esthetic or is there any other?
i do it for 100 dollars for my tremor XD ... BTW i have tremor v6 2022
Can you leave the part number? There’s so many different ones on the pro comp website
Looks great should have at least a minimal rake or it will look like the older GM trucks of the passed, ewww
How many inches was the kit? Sorry if I missed it if you mentioned it.
2 1/2 “
Go 3 inches
How did you get the 5.0? I thought they only came with the 3.5
The 2023 model comes with the 5.0 stocked… now you have to ask for it to be a v-6
What made you decide to go with the ProComp spacers?
To be honest, I knew I wanted spacers and the shop I used said he need to call his distributor to see what he can use for the Tremor because you can’t just put a normal leveling kit on. I’m not a lift or suspension expert but apparently with Tremors or TRX or any upgraded suspension set up you have to have preloaded spacer because of the programming between your back and front tires and how it communicates has to be set up correctly and pro comp preloaded spacers can handle it. Again I’m not the expert but that’s what I was told because at first he wasn’t sure about touching my truck because he didn’t want to mess up my setup. I’ll have to get back with you on more of the info
@@jaxxdoe6767 Thanks for the info! That's what my dealership told me as well. They need to use the pro-comp preloaded spacers or the more expensive fox 2.0 coilovers..
Not trying to stir any argument up or anything like that but you can in fact install any 2 inch or 2.5 inch spacer for 2015+ f150s onto a Tremor. Lots of websites are telling people that you require a “specific” but that’s false. I’ve installed several of these spacer lifts now
What’s the tint percentage?
I went as legally dark as possible in Texas when h is 25% on my front windows and black out on the rear windows, limo tint which unbelievable was 5%.
👍
any thoughts on a lift or bigger tires?
So eventually I plan on putting 35’s but I’m in trouble with all the ads ons I have already bought lol so I think I will be waiting til I pound these down and I have to buy new. Without a lift of the leveling kit I don’t think you put on 35’s… it would be tight. I’m am going to do a video on the ground clearance. And no I don’t think I am going to put a lift on her… she is tall already, like the bed of the truck is to my shoulder and I’m 6’ with my shoes on.
@@jaxxdoe6767 great points. do you think 34's could fit then?
@@jaxxdoe6767 35s would fit, but you’d need to do 285/75r18s rather than traditional 35x12.5x18 size. Difference is simply the former is an inch narrower than the latter, and the clearance issues lies with the width not the height.
Looks great!! 1" lower in front is perfect, most leveled trucks have the appearance that the rear is lower which sucks IMHO, I have the same truck and I'm not leaving it, when you actually use the truck for it's intended purpose, like hauling max payload in the bed or towing a trailer, it sits pretty much level
@@archascents5157 I run 34s on a stock tremor, no issues
Great looking truck, but the running boards are backwards from the factory. Turned them around on mine looks way better.
The running boards are on correctly, some people turn them around