Hi Oleg, here it is - DEWALT Angle Grinder, 7-Inch, 13-Amp - amzn.to/46RhYvn Also, you can watch this video - Which Grinder Blade Need To Use For Wood Floor Grinding - czcams.com/video/09CkAe-j59k/video.html Thanks!
Очень хорошие видео. Купили квартиру, тоже хочу снять ковролин и сделать деревянные ступеньки. Буду делать по вашему видео. Есть вопрос , где вы покупаете ламинат для ступенек уже с готовым порожком ?
Привет, все магазины, которые продают половые покрытия, имеют ноузинг или могут заказать. Квадратные носы для ступенек иногда делаем сами но в основном заказываем из мастерских которые на этом специализируются. Просто отдаем им материал а они нарезают и склеивают.
At 9:42 you show you cutting one side of the board but how did you make the cuts on the other? What tools to make so straight and angle?? Your video is so helpful but I am stuck here!😢
Hi, that’s why I am cutting only one side from the wall for making tight. Another, from open site, I am not cutting. Because I need square for nosing. Easy!
I hope this video will help you in your future project!
Tools I used for installing hardwood floors on stairs:
- Stair Tread Gauge - amzn.to/3BW38FN
- Construction Glue - amzn.to/3I0Yt9q
- Pin Nailer 23-Gauge - amzn.to/3WDBYeY
- Miter Saw - amzn.to/3vfB8JH
- Dewalt Table Saw - amzn.to/3hOJKDV
- Ridgid Vacuum - amzn.to/3OcpMy8
- Rubber Mallet - amzn.to/3WlH2Vu
- Cyclone Separator - amzn.to/3YZc5Z8
- Wood Glue - amzn.to/3VsYndL
Thank you!!!!!!! You are the only one showing the right way
Happy to help!
Thank you very much for your video, It has helped me out big time.
I am happy to see yours positive comment!
Очень сложная работа, но рассказано подробно и понятно. Спасибо
Thanks!
great video man, thank you!
You’re welcome!
Замечательно! Спасибо😘🎉
Благодарю!
Thanks
You’re welcome!
Очень хорошо!
Благодарю!
Why do you put your riser butted up instead of sitting on top of flooring is there a reason or do both methods work?
Hi, this is my method.
Nice job as usual .
I appreciate that!
What kind of wheel is used on the grinder for subfloor preparation?
Hi Oleg, here it is - DEWALT Angle Grinder, 7-Inch, 13-Amp - amzn.to/46RhYvn
Also, you can watch this video - Which Grinder Blade Need To Use For Wood Floor Grinding - czcams.com/video/09CkAe-j59k/video.html
Thanks!
@@MrYoucandoityourself Thank you! That looks like a very reasonably priced tool.
Очень хорошие видео.
Купили квартиру, тоже хочу снять ковролин и сделать деревянные ступеньки. Буду делать по вашему видео.
Есть вопрос , где вы покупаете ламинат для ступенек уже с готовым порожком ?
Привет, все магазины, которые продают половые покрытия, имеют ноузинг или могут заказать. Квадратные носы для ступенек иногда делаем сами но в основном заказываем из мастерских которые на этом специализируются. Просто отдаем им материал а они нарезают и склеивают.
At 9:42 you show you cutting one side of the board but how did you make the cuts on the other? What tools to make so straight and angle?? Your video is so helpful but I am stuck here!😢
Hi, that’s why I am cutting only one side from the wall for making tight. Another, from open site, I am not cutting. Because I need square for nosing. Easy!
What was the tape for on the riser? Also thank you for the help.
There is a masking tape for keeping boards together.
Thank you 👍 How many steps you make per day, bro?
One flight, sometimes less.
@@MrYoucandoityourself great thank you
@@MrYoucandoityourself my client also asks me to do the same job 🙂🤝
Great video👍 just wanna to ask you what model is your meter saw with laser??? Because mine one has only shadow line. Thanks
Hi Sarunas, I am using DeWalt 10”sliding miter saw, and I bought laser on eBay, around $70.
Many thanks for reply but is it possible to get a link what kind of laser and how did you attached it to the saw
www.ebay.ca/itm/222401722189?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=E3LyqA2uSfG&sssrc=2349624&ssuid=G9Rg5wgcQM6&var=&widget_ver=artemis&media=COPY
I am in your area, can you come do my stairs?
Yes, I can
How can you order your markers for spike markers?
I don’t understand you question, sorry. Did you mean how I filed holes from the nailer? I don’t filed, because it’s too small, if you asked about it.
Your tripod for levelling concrete where can I order them? Send me a link
@@dimitriosiliefski1974 - Leveling Tripods - bit.ly/2uVCPfX
- 4D Laser Level - bit.ly/2uVCPfX
Keep shining as brightly as you do!! Boost your online stats = "promo sm"!!!
Thanks for watching!