Insta360 X4 & X3 kite line mount cut my lines in one session

Sdílet
Vložit
  • čas přidán 11. 09. 2024
  • I used the kite line mounts for the insta 360 x 3 and looks like it will be used for the X4 as well for one session kite surfing in light wind and the mount with very sharp edges cut through my safety lines which is very dangerous as it could have dropped me out of the sky during a jump this has been machine cuts and left sharp edges which seemingly are incompatible with kite Lines and needs to be redesigned unless for some reason this is a mistake on only my model and other model pipeline mounts are smooth down and not damaging kite lines.

Komentáře • 19

  • @hahn8552
    @hahn8552 Před 4 měsíci +2

    Hmm, yeah that does appear to be a design flaw. I wonder if it’s made worse because of Duotone’s high Y split. I would imagine that the line comes out the top at a sharper angle than on a low V setup.
    Nonetheless, Insta360 should absolutely be curving the edges of the holes. Actually, there shouldn’t be any sharp edges just in case there is a kitemare. Maybe you can smooth out the hole edge with a dremel with conical bit.

    • @DavidUrsell
      @DavidUrsell  Před 4 měsíci

      Yes they should be super smooth edges everywhere to go on kite lines being a kitesurf specific mount. I'm speaking with them now. Hopefully they'll get it sorted!

  • @cybsyl
    @cybsyl Před 4 měsíci +1

    Nice point of view, Pretty water color 🙂

    • @DavidUrsell
      @DavidUrsell  Před 4 měsíci

      Welcome to the cappuccino coast to my friend whenever it's his stormy in Essex the watercolour is always very very Sandy but it's relatively clean water it's just very Sandy and silty although in the summertime occasionally we get clear water when there is no wind

  • @crocodile172
    @crocodile172 Před měsícem

    Video title is wrong. There re no currently available line mount for X4. X3 and X4 have different sizes so the one on video will not work for X4. Please fix it

  • @timkay4696
    @timkay4696 Před 4 měsíci +1

    the x4 design footprint is bigger than the x3, and as the kite mount sits flush I dont envisage the x4 fitting in an x3 mount. Ive had the x3 kite mount in light use however and not faced issues, ill check if mine has smooth edges, instructions does say on 4 line kites incompatibility due to safety lines however

  • @passatonvoisin
    @passatonvoisin Před 4 měsíci +1

    Thanks for sharing. I was already a bid skeptical about this mount for all the parts sticking out.
    How far from the bar do you install the mount? It looks pretty close to you. Did you see any issue when doing rotations or looping the kite?

    • @crocodile172
      @crocodile172 Před měsícem

      They recommend it to be installed close to the release. I installed mine in different positions (from 5 inches from the splitter to up to the 5 ft). Lots of issues with loops/rotations. Every other loop one of the steering lines gets stuck over the sticking out parts. This mount is pretty dangerous to use. Hope they attend it when building one for X4

  • @bring_everything
    @bring_everything Před 4 měsíci

    Piano wire for the win.

  • @ridewithandrei
    @ridewithandrei Před 23 dny +1

    i ve got a 3d printed solution

    • @DavidUrsell
      @DavidUrsell  Před 23 dny

      @@ridewithandrei sounds good to me

    • @ridewithandrei
      @ridewithandrei Před 23 dny

      @@DavidUrsell doing some testing and will share details soon. had a working option for insta360 x3

  • @semomonkey
    @semomonkey Před 4 měsíci +1

    Oh you think bigger is better? You need a 15m kite to prove you're a man! You can't beat my 1.2 meter kite! Size don't matter buddy! I get all the girls!

    • @DavidUrsell
      @DavidUrsell  Před 4 měsíci +2

      Will I'm married so especially if my wife is reading this I am definitely not trying to get all the girls I will leave all the girls for you and stick on my 15 m 😄

    • @semomonkey
      @semomonkey Před 4 měsíci +1

      @@DavidUrsell I do have a legit question tho. I just have a peter lynn training kite for hobby flying. But considering how much a 1.2 meter can pull with a bit of wind, I'm actually scared ass hell to even try a 15m. That sounds crazy to me! I am planning on getting a 2.5m but 15? Dude that shit will send you to space! At what wind speeds can you fly a wing like that?

    • @DavidUrsell
      @DavidUrsell  Před 4 měsíci +1

      You definitely want to be very confident flying in chi and experience to fly a 15 m even in good winds a 2.5 m will pull you a lot also when you talk about your 2.5 m as it is a ram air kite and not an lei it will have more power for its size whereas the water kites are curved and have a smaller lifting area they are also heavier due to the inflated sections which means they produce less power of per size so when you are talking about a land kite a 2.5 m is a good size a 6 to 8 m is about the maximum fixed power foil you would want to go for when you go for lei kites however we can go up to 20 m without a problem and also these kites have a lot of d power on the control system so you can release a lot of the power which makes them very comfortable however you do need to make sure you have lessons if you wanted to use large deep power kites as there is a loss of power and you could break yourself very easily

    • @semomonkey
      @semomonkey Před 4 měsíci +2

      @@DavidUrsell That was a really really really really really long sentence. But I think I got what you mean. So what you're saying is that my kite is stronger then yours! Ha! No just kidding. Thanks i wasn't actually aware there was such a difference between the two types. I knew you had more control with 4 lines etc. You think you could kite on water with a 4 meter foil? Ram air as you call it.

    • @DavidUrsell
      @DavidUrsell  Před 4 měsíci +1

      @@semomonkey yes power I use Google dictate so no grammatical intervention unfortunately