Milling (porting) intake manifold ports with a wood router
Vložit
- čas přidán 6. 09. 2024
- After using the wood router to mill the center divider in my dual plane intake manifold I decided to try and use it to open the ports up a bit more. I switched to Edelbrock intake manifold gaskets and the gaskets were larger than my previous ones. I had a slight port match before now I'm enlarging them even more.
I was really surprised how much control I had using the router to rough it in and then use my electric grinder and a bit to do finish work.
In the future I'll be posting on Instagram: Shop_Dog_Fabrication
I hope you enjoy the video.
Links for the similar tools I used, I wish I would have purchased the mill bits vs router bits
Cartridge rolls and mandrel Here are some examples:
amzn.to/3OgGuxy
amzn.to/3QlEmqI
1/4" Milling bits
amzn.to/3KnHvCM
amzn.to/3OES86z
Variable speed controller:
amzn.to/43PAPUL
Warning
This video is made for entertainment purposes and not necessarily educational. it doesn’t mean to hurt any…and don’t take it seriously. I enjoy doing this, do what I do as your own risk.
Disclaimer
As an Amazon Associate I earn from qualifying purchases, I purchase all the products on my own or provide a link to a similar product I use. I do not get any freebies, I purchase everything just like you do.
The information on this CZcams Channel is not intended or implied to be a substitute for Professional advice. All content including text, graphics, images, and information contained on or available through this channel is for general information purposes only.
This channel makes no representation and assumes no liability for the accuracy of information on or available through this channel, and such information is subject to change without notice.
You are encouraged to confirm any information obtained from or through this channel with other sources and review all information regarding anything shared in the videos.
I will follow suit on my 396 manifold..I used to work in building construction as ayoung man.We used carbide saws to cut and work aluminum control joints.I never dreamed of porting with a router...Wow! Never to old to learn..Thank you...
Glad you found the video useful.
Distracting mouse in the corner at 1:30
Yea, it was funny as I was filming I saw it out of the corner of my eye.
That's a good idea
Nice but the ports curve
That’s why they are mainly for port match then the manual work of blending kicks in.
It's quicker and faster I'm going to do the Same thing