How to change the oil on a 2011 - 2020 Toyota Sienna

It's been awhile since I've change the oil in my 2014 Toyota Sienna and the maintenance required warning message came up reminding me that it's time to replace the oil. In this video I created a step by step guide that any novice can follow to quickly and cheaply change their oil. Below is a list of the tools you will need as well as the torque specs you will need to tight everything properly.
K&N Oil filter - amzn.to/3g6YdKh
Penzoil Ultra Premium 0W-20 Oil - amzn.to/3CYX40n
Jack Stands - amzn.to/3T8fJwb
Floor jack - amzn.to/3Vx0f6x
Oil drain pan - amzn.to/3yKCs9r
Breaker bar - amzn.to/3geEb0j
Torque wrench - amzn.to/3D4iZn2
9/16 socket - amzn.to/3SbjCPD
Socket wrench
Torque Specs:
Oil pan drain plug - 30ft/lbs
Oil filter cap assembly - 18ft/lbs
Oil filter drain plug - 10ft/lbs

[@drgdawson1]

Don’t forget to replace the oil plug gasket. 😅

[@stevensevek6151]

⁹/16"... 14 mm to be exact.
I recommend the Motive MX2320 oil filter cap wrench.
Ultra Platinum is a bit overkill unless your vehicle has a GDI engine; then you need a low volatility oil.
Anyway... Good video. Better than I could do.

[@Moretimethanmoney]

Had to Google GDI. :). Isn't the 2GR-FE engine in the Sienna a direct injection engine? You're right though, Ultra Platinum is overkill. I figured I'm saving money by doing it myself so I'll spend a little more on the oil and filter. Thanks for the feedback though! Would love to hear anyone else's opinion on oil, filter, anything else.

[@njsongwriter]

@@Moretimethanmoney
I'm not sure what year the engine became a GDI...
I was thinking a little like you. But I decided that since I'm changing my own oil instead of buying more expensive oil, I would buy the economy brand that still meant the Toyota specs and simply change it every 5K instead of 10K. So I use SuperTech full synthetic 0W-20.

[@boomsuga]

What Jack capacity do you need 3 ton Jack?

[@ddk80]

Thanks for the video and the torque specs. I use rhino ramps for my oil changes, and that gives me enough clearance.

[@bozanimal5576]

4:12 "There's a special tool..." Darn it, Toyota. I don't have a giant wrench thing like that, so ugh.
And you don't have that tool, either, so you didn't torque it to spec at 6:56, which is fine. Most people don't torque to spec in their oil changes.
Good video, though! Showed me all the steps. Good commentary.