Review of Carbon Fiber Demon Hood Andersons Composite On Vicrez Challenger 392 Hellcat Scatpack
Vložit
- čas přidán 17. 07. 2021
- here is my 100% honest review of my experience with andersons composites and the quality of their hood. this is only based on my personal experience.
let me know want you think in the comments ⤵️
SUBSCRIBE
LIKE
COMMENT
SHARE
Subscribe/Like/Comment for future videos on the Challenger and future upgrades with products and reviews.
.
IG @rome_lowlife
FB @rome lowlife
TikTok rome_lowlife
.
Official sponsors⤵️
•AERO Detailing Products
•AADesigns
•Voxx Wheels
•Glassskinz
•BRAUM Racing
•Mobile Weld Specialist (Half cage)
Carismo Domestics
DISCOUNTS⤵️
💵 **% AERO Code. (DM ME)
💵 10% Autoledtech Code (lowlife10)
💵 10% AADesigns Code (lowlife10)
💵 10% Glassskinz Code (lowlife)
💵15% Mobile Weld Specialst Code (romes deal
#dodge #challenger #vicrez
What do ya'll think? Am I over reacting? What would you do?
Definitely not over reacting.
@@bennydrives 🙏🙏
I want one looks excellent bro
I’m with you 100% on every point you made. Quality is so hard to come by nowadays. Btw, your car is dope.
Facts man. Appreciate it 🙏
Yo I definitely understand how you feel I went through a similar situation with my hood from a different brand/distributor I wanted a certain style oem look there wasn’t a lot of info or anyone I could find that had the same hood I wanted but the body shop did there thing and made it the best it could possibly be when I installed it the body lines where just a little bigger than before but I love it and would do the same again maybe different brand I used Amerihood after I purchased it I did more research and a lot of people was bashing them but my overall experience was good
Really like the hood!.
Love the car and your style! Did you say you got the hood through BMC Extreme? And another question on the center console. Did you say you got that from Destroy customs?? Great channel, love all the content and reviews you do 🤘🤘🤘
Yes bmc extreme. And the consol is from destroyed kustoms on ig. I made a video on it a little while back. Thanks man. 🙏🙏
Hey man so I got the same hood and it’s amazing looking and they had that lil plate on. However does yours smell like flowers? Hard to explain but the damn thing has my garage smelling like I have a ton of flowers in there and wondering if you had the same and if so did it go away?
Looks badass though, but totally understandable on your frustration, I would be too. Paying that much for quality hood, need some reassurance for sure.
Do only Anderson Composite demon hoods have the functional air that connects to the airbox? I want to upgrade to a demon hood, so my T/A has the airbox with the hood connection also.
I guess it doesn't matter as long as the air lands onto the airbox without a seal? I'm still trying to figure this out, so I can buy me one.
Wondering how long it took from the time you ordered it til you received it bro? timelines I've gotten are literally all over from 4 weeks to 12 weeks.
Yeah they half assed this frfr, I would have been pissed! I'll be looking else where when I'm shopping around. Thanks for the review!
What’s up bro. When you pay for things, you expect the full service point blank. Stupid question, can the haze be buffed out by just completely ceramic the hood to bring the shine without destroying it? Other than that, the car looks good bro👍🏾👍🏾💪💪
Thanks man. 🙏. A thorough buff and polish should eliminate the haze...hopefully. And then a ceramic after that to seal in the shine. But I won't really know until I take the time to work on it
It's amazing how a company charges so much and it looks like that....your not being picky....you should get what you pay for....I've heard alot about there customer service that it sucks....they also don't give any discounts like other companies....great video
This company doesn’t seem serious like I’m glad the fitment is good but this is the second video I’ve seen with imperfections on the hood
Yeah, pretty disappointed in the finish on it. I've seen a few videos on it, but no one was showing close up detail videos. So I figured I would do one and be 100% honest
What can you tell me about the weight compared to the factory one?
What are your side skirts and front spitter brand
Whated to buy, but not anymore
Thank you for the rewue
What are your plans with the current wheels you have? 👀
They are going to be my daily wheels. My 3 piece ld97s will only be on for shows
Does you vent actually have holes through and through? I just got mine and the vents arent even functinal
Yes, this hood is functional
I never understood the appeal of spending a lot of money on carbon fiber parts, but man it does look good
Man, I just watched this video, and I'm not sure how I missed it, but my hood doesn't have the name tag on it either, wtf. Is the trunk supposed to have it to ?
🤦♂️, damm, sorry to hear man. Yeah the trunk has it. You can clearly see it in my vids. Trust me, I definitely checked
How much was that hood
Do you not need hood pins?
I’ve been trying to figure that out too I don’t want to drill my hood but also don’t want to damage my car or hood I got a charger hellcat one and it says I need pins but if it bolts on like a factory one, it shouldn’t need them, right?
@@maxbrooks-hoenig4701 I bought the hood for my charger scat on for about 4 months went over 120 mph no problem at all. By the way if you don’t know the frot scoop Isn’t active so you just need to cut a hole on the back plastic to get air in/out of the engine bay
@@hydr2170 thanks for the response! I unfortunately got it damaged from American muscle bc of pilot shipping, so I’m awaiting my replacement hood. My aluminum one I have now is bolted down only by the latch so the latch must be good enough, no? That’s what I can’t wrap my head around. yes it may weigh less possibility it’s own weight could also be holding it down. but if it has less surface area (new one, bc of the holes) it should have less chance for lift. Just so scared to f the pins up or damage the hood myself doing so. & I’m scared to really ‘test’ if it’ll hold without them. Will most likely drill pins however.
@@maxbrooks-hoenig4701 no problem and the weight of the carbon hood is almost the same as stock you will have to remove the latch on your stock hood and place it on the carbon hood. And I assure you that it is safe to run it without hood pins there is no need for them. And the (holes) the hood scoop only works if you have a open box air intake even if you do I 100% recommend using a cut off saw or circular saw and cut a hole into the plastic on the back side of the scoop for air flow into the engine bay. Lmk if you have other questions
@@hydr2170 really appreciate the feedback, has gotten rid of anxiety as I couldn’t find a review from anyone that has tested it. Figured the warnings for pins was just Anderson covering themselves. I’ve got a rt/392 charger with a K&N so this helps a lot, so I think I will send it.
Do NOT use the trunk struts on the Anderson trunk lid bro. It causes the trunk to bow in the center. Found out the hard way.
Really!? 🤯. Is that the one you currently have? Or you get a new one?
@@LowLifeMods same one I currently have. No way to fix it. I even went down to lower compressions struts when I got it and it still bowed.
@@carbonrt 😯😢. Crazy. I thought carbon fiber was suppose to be strong. Lol. Thanks for the info man, I'll keep that in mind
@@LowLifeMods the autoclave carbon stuff is really strong. The "laid up" or carbon covered stuff that most of the aftermarket stuff made for our cars isn't nearly as strong.
You most likely caused the hazing from improper washing techniques.
Nope. Besides my car is garage kept. It hardly ever gets washed. I mostly detail spray. So at the most I would probably cause micro scratches from that. But it wasn't scratches. It was haze in the finish work from not being polished out. I polished it out after this vid. I've done plenty of detail work and seen many finishes. There was no way I caused that. Literally went from the box, to my car, and i seen that haze later that night
@LowLife Mods You 1000% can cause haze on a Carbon Fiber or Fiberglass body panel from improper washing.. You said in the video you detailed it a couple times. Not here to bash you or anything.. I'm a IDA Certified Detailer.. I've seen it more times than I can count . ESPECIALLY WITH carbon fiber.
@Beyond THE Details you trying to say I caused it is pretty lame. You don't know my experience. Ive owned many cars and many parts. I've never seen that before. Never seen it in any other aftermarket part. Respectfully you don't know me or my cleaning process to come out and say it's something I caused.
@@LowLifeMods Man saying YOU COULD HAVE. Get out of your feelings WOW.
@@beyondthedetails "could of". Such great insite. Your so wise