Installing a Twin Disk Clutch into my Camaro SS!!
Vložit
- čas přidán 27. 11. 2022
- After my OEM stock clutch went out, it is time to Install this Twin Disk so I won't have any more problems with the new added power! From Dropping the Transmission, Installing a new Slave Cylinder to Installing the clutch with proper torque specs- this video shows it all! She'll be safe up to 925 ft-lbs. of power!
CenterForce Clutch Used: www.centerforce.com/i-3049972...
Slave Cylinder Billet Sleeve: gwatneyperformance.com/produc...
OEM Slave Cylinder Replacement: gwatneyperformance.com/produc...
Gwatney Performance Innovation: gwatneyperformance.com/ref/11/
Kayla's Instagram: / kaylarundle
Business Inquiries: KaylaRundleDesign@gmail.com
#TwinDiskClutch #KaylaRundle #Centerforce
*Notice Monetized, Affiliated & Sponsored Content may be included in the video or description. If you make a purchase on items shown in the video, I may get a small commission. Thank You for your continued support on my Channel. Featured driving clips may be exaggerated for entertainment purposes. Drive Safely & Modify under state laws. - Auta a dopravní prostředky
Awesome job Kayla a great selection of clutches. You have done so many up grades by yourself and knowledge is priceless 👍💯 Aussie Fan 💪🇦🇺🤘🆒
You are absolutely correct about all the folks at GPI, Mrs Kayla. A good group of well rounded Americans that like to make things go fast. Honored to have met you and saw your car up close. You are always welcome back here in Arkansas.
I am so honored to have met you! And thank you so much for saving my life in Kentucky and helping me get back home. The GPI team is so amazing and helpful! Very grateful to have met all of you!
What I really liked about the GPI crew is that throughout the whole engine build, tuning, and clutch installment process they were all very informative and took the time to help you as well as allow you to always be in the shop letting you be involved as much as you could. Awesome crew. Idk if they would make there own CZcams channel just to show the different types of builds. Glad you and the camaro made it home safely.
They were so absolutely amazing. Very patient, answered all my questions and weren’t too afraid of the camera. I couldn’t ask for anything more! Thanks for watching the series!!
Damn you have such a nice build😮💨👌🏽
Kayla: Only concern I had for your build (OEM worn clutch)..FIXED. Have fun on track and the road 👍.
Awesome video Kayla keep rocking it
Amazing build, you should be so proud
Thank you so much! I could never get rid of this car
That's awesome ! I love it when new parts get installed reminds me of when I Installed a rebuilt T56 in my Camaro Z28 for the first time ! then broke it on my first drive Lol I was devastated because When I had It rebuilt a second time I didn't have any money to rebuild the engine with a different Cam to continue the build for more power ! However the engine still ran Good and I had fun with my 1st project Camaro Is what counts! but I sold the Car to start something newer not LS unfortunately or even Chevy for that matter :( I did do a LS swap in my Dads 1994 Chevy truck which is pretty cool It started first crank so I guess I do still play with LS stuff Haahaaa
Learned something on this for my c6 Vette
Really awesome that you're learning everything possible!! After the 23 season Tucson will be the only 1/4 mile game in the state, I work there, we make sure that the track hooks.😁 As far as road courses, you do have some options, might I steer you towards The Podium Club in Casa Grande, run by my Brother-in-law, brand new track, it does have memberships, but is also host to many events where membership isn't required.
Maybe I'll see you one day at Anthem Cars&Coffee, it's hitting the road at the crack of ass that is the obstacle for me, but I've done many 24+ hr, red eye cruises, so who knows.😁 Stay awesome!!
Ooo so you’re the one with the connections!! I’m in Scottsdale so I’m not TOO far away from you. I’ll for sure have to bring the Camaro down your way. I really want to race at Podium or Apex one day. Finding road course tracks are super difficult!
Awesome video! ...so what's next!
that's a pretty looking clutch! Would be super cool to see a tour of centreforce if you're able to.
That’s my goal one day! I’ll make the drive soon enough!
@@KaylaRundle Awesome!
the opening scene was the money shot
Darn it Kayla! Now I want a twin disk!
Go treat yourself!!
Max seems like a cool, genuine person. I like Max. Thank you So much for your vids, You seem cool and genuine too . Remeber If ya aint first Your last. lol
Thanks for the input. Max is awesome- and even better on camera. He’s a trooper 😂
Which road course tracks do you plan to visit?
...thanks for the video !...
Maybe I missed it. Did you have to shim the slave cylinder?
You did great job building that motor. Girl power. How soon are you taking it to the track
I took it to the Good Guys auto cross event in Scottsdale, but she need more room! Road course event coming soon! Thanks for the support!
Vers Nice works 😍
I love it tu fundillote
OH And I've learned ALOT from your vids. And love your style and taste . I mainly learned FUK doin a headliner HAha
I’m sure all that work done didn’t help the mpg, but it does help the smiles per gallon
Mpg wasn’t the goal here! Car runs so good now
Lovely🙂
one of the first to comment. regards kayla 😀🤗👍🏻
Thanks for the support!!
Billet flywheel or light weight flywheel?
Hey Kayla what's up I was wondering do you plan on getting a one-piece drive shaft because with the two piece like the original one that is in the car you do lose a little reaction time a one-piece drive shaft will give it a quicker reaction time and feel like more horsepower at least that's what I've been reading online I'm looking into getting one for my 2011 rebuild
Yes I for sure need a one piece Driveshaft coming soon! Haven’t found which one exactly I want yet but I’m sure you’ll be seeing that install video sometime soon!
I've been checking out the drive shaft shop they have some really nice carbon fiber drive shafts that capable of handling well over 900 horsepower they also have aluminum you might want to check them out online okay can't wait to see what your decision will be on the drive shaft I'm going to check out that place where you got your clutch to see if they have anything for my automatic okay Kayla talk to you soon
@@josephsolomon8623 carbon fibre tail shaft is the way to go you don't have to worry about it coming up though the car. Carbon fibre goes to dust. 👍💯
Someone gots a crush on max 😄
So is it super easy to shift then??
I drove the stock 3.91 gears in the SS 1LE and it was super hard to shift for comparison.
It’s smoother to shift since my power level in high rpm’s is consistent. So it’s not jumping to different power levels when I shift
💗
I am very curious what you get for mpg now
On E I get 90 miles to a full tank
Crush ❤️💯👍👏👏
The prettiest gold clutch you'll never get to see on the car 😂
I know I loved how it looked for a minute until we covered it up with the trans again :(
Sorry to hijack your video. Been trying to get ahold of you on State48 Camaros and your carbon fiber roof video.
What body shop did you use to get the roof installed. Install was amazing and want that same shop to do mine.
I used a shop in Scottsdale behind the scenes/ after hours work! It’s super difficult to get any shop to do it because of reliability during crash & possibility of leaking.
Email me at kaylarundledesign@gmail.com and I’ll send you the info
Ok Thank you
i think the plastic bearing gave out because you tried to teach mia how to a manual lol !
Haha that was quite some time ago. Every time I pushed in the clutch it got worst and worst after the motor was done. It was ought to happen… glad I was the one driving when it happened
sorry if i missed it anywhere, but what year is your Camaro. thanks.
2013
@@KaylaRundle thanks, im doing a new clutch install in my 2010 SS, soon. so this is a great help.. thanks. lot of work involved indeed. definately replace that plastic bearing.
Rhett
3:58
I'm vary curious how this works with the insurance company like if she totals the car does the insurance only cover a stock camero or has she raise the overall amount the car is insured for? Probably playing devil's advocate with this question !
You have to contact the insurance company and give them the added details. My car is covered up to $150k on my plan (not including liability). So if my car got wrecked I’d get a huge pay out lol
Such underrated CZcamsr....
Thank you so much!!
@@KaylaRundle you're awesome,big fan.....
You and beautiful!
Is everyone that gets there car worked on at this shop get to watch and work on there own car? Bet I wouldn't be able to do that if my car was in for service....
Not everyone can be a part of the process. However if there is opportunity to offer trade work like how I did- then no one is stopping you! They do give tours and are super helpful and will show you everything if you get your car worked on there!
Hola Güera hermosa.😊
GLAD U HAVE/CHOSE A CAMARO OVER A MUSTANG
Chevy baby
@Kayla Rundle u were definitely brought up/raised right!!! U turn ur own wrenches, and love chevy/GM
Kala, you need to ditch E-85 fuel, it's full of corn alcohol. It will gas wash your rings and cylinder walls, it's like running your engine low on oil.
I suggest using Shell or Sunoco premium 93 octane, you can run some Lucas REAL octane booster, it will make 20 gallons of 93 octane into 96 octane.
You can always use more Lucas, if you want higher octane. I was hoping you'd start your engine with open headers.
Stop telling fake information. E85 wont cause any issues to engines long as its not sitting in fuel system month. Its also important that fuel trim is correct and engine wont run too lean. When using E85 it needs fully synthetic oil with API SN or API SP because these are designed to be compatible with high content ethanol fuel. Your bad advice increases risk for the Kayla Rundle to have future leukemia because gasolines with below 15% ethanol contain more confirmed carginogens benzene, toluene, xylene. These are stuff harm rubbers, plastics, brass more effectively than ethanol.
@@jakedcrane8019 Good on you Kayla some people have bad knowledge of what they can and can't do. There the sitting on the side of the strip watching Your Car going down. 🤣😂👍💯 Aussie Fan 💪🇦🇺🤘
Block you plates ... Stalkers can find you from registration.. etc. Home address
47K subs is a travesty. Hit the like button people, its FREE. Far better content than the 100s of channels showing the same idiots doing burnouts and rev battles over and over
Awh thank you so much! I work really hard to push good content on this channel that you can learn from, laugh, and get fun ideas!
@@KaylaRundle How is it holding up?
That’s nice eye candy in the shop for the boys lol
They were all super respectful and helpful
@mustangmark Hit That