Thank you for sharing! I almost bought a pair of these for my Clodbuster, but found out that the ESC can't reverse the rotation of the motor, which is required for one of the motors in the Clod. I'll be looking for an alternative then. 😊
Tested myself today, the control is impeccable, since is sensored and of decent quality minimal foreward and backward are super controllable and very sensible and responsive after some remote setting, i definitively suggest to get the program card for some more adjustment but for the rest is absolutely ok. A little loudbut fast!
Hello! I have a newbie question but after the calibration process, which I assume it is just as you said ( can you confirm it for me?), Domwe need to calibrate it after every power-on?
Hi no you only calibrate an ESC when you 1st bind a transmitter to an RC as you need to tell the esc how far the transmitter will travel in both forward/backwards and where the neutral point is :)
This is a race motor/esc so they all spin the same direction and can not be reversed as they are brushless and sensored, are you sure it's spinning the wrong way or do you just need to reverse the channel on you transmitter?
I just got this brushless combo, 3625 kv motor plus 60A esc. How is it? I couldn't find any rocket rc V2 review online in witch the product looked like the one i ordered from package and detail except yours. Are the dafault setting decent? What do u think?
@@WTFRCCars i have a tt01e and i use it for carpet racing , i hope the base punch is decently set and i need something that will give a good powerful acceleration and gradual and precise deceleration in corners. Does it have some delays (u press the gas and it takes a few second for the car to move) or some cogging (virtual impossible with the sensored motor)?
No cog as you say it's sensored and I run it in a carbon touring car so if it's good enough for that you should have no issues in anything else there basically a bl120
So the just stock is just that it's a stock esc and not able to change the timing and other setting also cost around the same price as this whole ESC and motor set up so it's not really a good companion as both are very different use cases :) this is a cracking set up if you need like I do a 17.5t motor but you can adjust the timing and other setting and it allows this at a much lower price, now is the a replacement for an xr10 pro elite no definitely not but it's a good option for a whole lot less if you don't need the features or amps of the xr10 pro :)
@@WTFRCCars agreed! However having a blinky option would allow it to do Sortof "double duty" and allow both blinky and mod users use it. Just my opinion,
my hsp 94111 is not working, the motor turns to the wrong side even reversing the radio, I need to know if I can use a 3.5mm banana connector on this motor and esc, the seller does not answer my questions, help me thanks
Tem um vídeo calibrando ele de verdade na prática? Estou com dificuldade, o meu o motor gira para o lado errado , não consigo acertar , nem no reverso do rádio da certo
Mate, i'm currently facing the following: I connect the battery, turn on the ESC ( a red light beeps with the pressing) but no beeping ever occurs. When i keep the button pressed it turns into a Blue light (for the calibration procedure) but again no beep at all neither any light.. When i plug the programming card it starts showing zeros and nothing happens.. What could it be?
@@WTFRCCars hey so i got it recalibrated by some1 and its working pretty good but for some reason the esc is still blinking blue even after i recalibrate it do you think this is normal? And also can you make a video of the esc after the calibration does it still blink and maybe can you give me a video of it already calibrated and running does it stays blinking blue like mine? 😁😅 thank you
Thank you for sharing! I almost bought a pair of these for my Clodbuster, but found out that the ESC can't reverse the rotation of the motor, which is required for one of the motors in the Clod. I'll be looking for an alternative then. 😊
Yeh there for race rc's and all drive the same direction :)
Tested myself today, the control is impeccable, since is sensored and of decent quality minimal foreward and backward are super controllable and very sensible and responsive after some remote setting, i definitively suggest to get the program card for some more adjustment but for the rest is absolutely ok. A little loudbut fast!
Great to hear!
Which program card is compatible
The one in the video
@@WTFRCCars ok, and do you think it's necessary, because I don't wanna spent 15$ if it's not
It makes.life so much easier to set up the esc
Always nice to see your videos......❤
Glad ya like em :)
Hello! I have a newbie question but after the calibration process, which I assume it is just as you said ( can you confirm it for me?), Domwe need to calibrate it after every power-on?
Hi no you only calibrate an ESC when you 1st bind a transmitter to an RC as you need to tell the esc how far the transmitter will travel in both forward/backwards and where the neutral point is :)
Your videos have helped me a lot! Thank you.
Glad ya like em :)
Hi wondered if you can help .I have installed the motor n esc correctly but motor is turning the wrong way how can I correct this thanks
This is a race motor/esc so they all spin the same direction and can not be reversed as they are brushless and sensored, are you sure it's spinning the wrong way or do you just need to reverse the channel on you transmitter?
I just got this brushless combo, 3625 kv motor plus 60A esc. How is it? I couldn't find any rocket rc V2 review online in witch the product looked like the one i ordered from package and detail except yours. Are the dafault setting decent? What do u think?
Well this one works well for what it's designed to do haven't had any issues so far, as for the settings really depends on how you want it to work
@@WTFRCCars i have a tt01e and i use it for carpet racing , i hope the base punch is decently set and i need something that will give a good powerful acceleration and gradual and precise deceleration in corners. Does it have some delays (u press the gas and it takes a few second for the car to move) or some cogging (virtual impossible with the sensored motor)?
No cog as you say it's sensored and I run it in a carbon touring car so if it's good enough for that you should have no issues in anything else there basically a bl120
Does it have a blinky mode? If not, the hobbywing justock is still a better option at a similar price point... Especially for racers
So the just stock is just that it's a stock esc and not able to change the timing and other setting also cost around the same price as this whole ESC and motor set up so it's not really a good companion as both are very different use cases :) this is a cracking set up if you need like I do a 17.5t motor but you can adjust the timing and other setting and it allows this at a much lower price, now is the a replacement for an xr10 pro elite no definitely not but it's a good option for a whole lot less if you don't need the features or amps of the xr10 pro :)
@@WTFRCCars agreed! However having a blinky option would allow it to do Sortof "double duty" and allow both blinky and mod users use it. Just my opinion,
Yeh definitely agree with what ya saying and I'll have a look into it and see if it has the mode cos I know many tracks that have the class :)
So i have had chance to set it up in an RC and yes it does have blinky mode when boost and turbo are off :)
@@WTFRCCars thank you for doing this! Going to grab a set of these for a few builds for friends that are on a budget,
my hsp 94111 is not working, the motor turns to the wrong side even reversing the radio, I need to know if I can use a 3.5mm banana connector on this motor and esc, the seller does not answer my questions, help me thanks
The wires are soldered directly to the esc and motor, and it's sensored so you can't just reverse the wires
soldei certo , defeito no motor
Oi é bom esse combo ? Você recomenda para um snrc r3g 1/10 ?
Yeh would work well in that RC :)
Tem um vídeo calibrando ele de verdade na prática? Estou com dificuldade, o meu o motor gira para o lado errado , não consigo acertar , nem no reverso do rádio da certo
You have to use the program card to reverse motor direction but some brushless sensors esc's can't reverse
I am not able to revert on the radio or on the programming card
@joealbuquerque5557 It may be same as the hobbywing 10bl120 where they only work in one direction as all the race rc's seem to only need one way
Mate, i'm currently facing the following: I connect the battery, turn on the ESC ( a red light beeps with the pressing) but no beeping ever occurs. When i keep the button pressed it turns into a Blue light (for the calibration procedure) but again no beep at all neither any light.. When i plug the programming card it starts showing zeros and nothing happens.. What could it be?
Sounds like a fault esc
Hi i have the same problem have you found the solution?
It's a hard one to find what the issue is as I can't make mine do it mine just works fine all the time :(
@@WTFRCCars i did a mistake when i was calibraring i did read the manual so i long pressed and it beeped while the car act like elevtrocuted
@@WTFRCCars hey so i got it recalibrated by some1 and its working pretty good but for some reason the esc is still blinking blue even after i recalibrate it do you think this is normal? And also can you make a video of the esc after the calibration does it still blink and maybe can you give me a video of it already calibrated and running does it stays blinking blue like mine? 😁😅 thank you
Can you turn on the boost and turbo without a program card?
From what i can see only with the programming card
Tested on-road or off-road? I need a FWD rc rally engine.
The motor and esc will work fine for any on or off road just depends on what class your racing in as to what motor limit you have
I only want to drive a hobby using a 17.5T engine.I want to use it on a carten m210r rally chassis
Yeh will be fine for it
Oi amigo tem video como ligar com radio primeira vez ?
I think I show the set up in this one czcams.com/video/scxrxbbpfBY/video.html
Eu consegui ligar , mas os comandos ficaram invertidos , não sei o que fazer
Boost turbo ?
Yeh it has settings for both
@@WTFRCCars program card ?
If you watch the vid I show it all
How fo you solder that? Theres almost no room.
No harder than any other race esc to be honest
So it can't do a 3.5t motir
Nope 5.5t is the lowest it will run
@@WTFRCCars dang I have a 3.5t motor just laying to be used
@chrismagallanes8858 yeh your going to need a strong esc to run that, the tekin rx8 has no motor limit on 2s but not cheap esc
@@WTFRCCars ok I tried it with my hobby wing xr8 plus but when I full throttle it cuts off
@chrismagallanes8858 yeh too high amp draw and too high kv
Its any 60a variant for esc bro?
Not sure what ya asking ?