How To Test and Replace A Rear Vehicle Speed Sensor P1706

Sdílet
Vložit
  • čas přidán 29. 12. 2020
  • How to test and replace a rear vehicle speed sensor; trouble code P1706. Common symptoms of a failing speed sensor include the inability of the vehicle to shift from first gear in to second gear. Torque binding may also occur. (What is torque binding.... • What Is Torque Binding... ) This vehicle happens to be a 2010 Subaru Impreza. Cheers.
    P1706 - AT Vehicle Speed Sensor Circuit (Rear Wheel)
    ► Subscribe: / carsntoys
    ►► Tools:
    Digital Multi-meter: amzn.to/2KOdFZD
    Alligator clips: amzn.to/2AQot3H
    Wire brush set: amzn.to/2ZeEDzO
    Dremel accessory kit: amzn.to/39UBM3p
    10mm Offset Wrench: amzn.to/3rJfryP
    ►►► Our most helpful videos (One million + playlist): • 1 Million Views Playlist
    Note:
    Any attempt to repair automotive parts and/or systems carries risk of personal injury. Always adhere and follow safe practices when working on vehicles. Such as, safety glasses, jack stands, no loose clothing, etc. No guarantee or warranty is implied. Use the information in this video at your own risk. Carsntoys is a member of the Amazon Influencer Program.
    Publication, reproduction or distribution of this film is strictly prohibited.
    Carsntoys
    / carsntoys
    #p1706 #rearvehiclespeedsensor #speedsensor
  • Auta a dopravní prostředky

Komentáře • 29

  • @seanbrennan3824
    @seanbrennan3824 Před 2 lety +35

    So your video skips testing the actual sensor.

  • @r.bechai1660
    @r.bechai1660 Před 3 lety +21

    How you test the sensor

  • @Mr_Jack_Of_All_Trades_
    @Mr_Jack_Of_All_Trades_ Před rokem +10

    And the sensor test?

  • @elcontableserio
    @elcontableserio Před 3 lety

    Great vid. Thanks for posting!

  • @elliotmunguni5102
    @elliotmunguni5102 Před 2 lety

    TNX FOR DA VID

  • @armandocastro6379
    @armandocastro6379 Před rokem

    Amigo tengo un malibu maxx 2004. No avansa nada ni atrás no adelante está totalmente neutralizado,. Pero si me marca todo el velocímetro, cree que sea el sensor speed?

  • @tonyreyes3294
    @tonyreyes3294 Před 3 lety

    My signal voltage is a bit high 10.88 voltage and it should be around 5 volts

  • @MichaelWysocki-ks5xt
    @MichaelWysocki-ks5xt Před 3 měsíci

    Lucky man, the bolt turns right out and the sensor twists right out.

  • @arminsingca4817
    @arminsingca4817 Před 2 lety +1

    you didn't test the sensor itself only the voltage going to the sensor.....

  • @merlygramatica179
    @merlygramatica179 Před rokem

    Were i can buy rpm sensor of nissan preasage model 2007

    • @Hive_Hop_Farm
      @Hive_Hop_Farm Před rokem

      Google it. Any parts store anywhere 🤷🏻‍♂️

  • @nissanslut7870
    @nissanslut7870 Před 3 lety +1

    Looks like a nissan vq35 cam pos sensor

  • @guledmah5872
    @guledmah5872 Před rokem +1

    Sorry you didn't test the ground the signal and the sensor

  • @moneimhussein26
    @moneimhussein26 Před 3 lety +2

    U r amazin

  • @kellykeys6092
    @kellykeys6092 Před 3 lety +1

    Shouldn't you also check the ground wire with the meter via impedance?

  • @Cheke95
    @Cheke95 Před rokem +1

    Lol no need to test the sensor if it’s getting voltage and it isn’t working.that’s the whole point of checking to see if the sensor is getting any voltage.

  • @roberthodges1267
    @roberthodges1267 Před 2 lety +1

    Sorry but all you did was show how to test for signal voltage to the sensor.

  • @monsonlockandkey
    @monsonlockandkey Před 3 lety +1

    For anyone watching this never and I mean never front Grove a connector with a paper clip.

  • @johnsimmons8456
    @johnsimmons8456 Před 2 lety +1

    Maybe test the actual sensor out of the car lol?!

  • @erichhippe85
    @erichhippe85 Před rokem

    so you speaking to a child oh ya never tested the damn senor

  • @morgancael5500
    @morgancael5500 Před 3 lety

    2:32 I like that😍💋 💝💖❤️