Vauxhall Mokka TPMS Warning Light Reset. How to reset the TPMS Light
Vložit
- čas přidán 6. 09. 2024
- How to reset the TPMS warning light on your Vauxhall Mokka, this is a 2015 model. This is the full process including telling the computer the pressures that you’ve set them to. There are 3 settings. Watch to the end for info on wheel location issues.
That`s just cleared that headache up - My Mokka X was telling me my rear passenger side was was low but the tyre pressure was correct when checked, it never even registered with me that the tyre`s might be on the wrong wheels ---- twice i have checked that back tyre with 2 different pumps thinking the pressure gauge was wrong hahaha
Thanks...you've answered why I can't get my light out. I had swapped my tyres back to front so have been pumping up the wrong one.
You’re welcome thanks
I've got a 2017 Moka S, just had alloys refurbished, didn't occur to me about original left right, front or rear placement of wheels/sensors, anyway they came back and I fitted them to car, car drove ok for one day approximately 10 miles and showed tyre presure values for each of the 4 tyres, < no warning messages at all.
2nd day warning message came up says > SERVICE TYRE MONITOR SYSTEM-with spanner icon to the left, SO now ! when I scroll to tyre presure it shows 3 tyres at 35 psi but N/S rear although inflated shows symbol only - and nothing else,
Also I have seen video of a guy resetting each individual tyre sensor by walking around the car with a small hand held unit=tpms reset tool ?????
Any help is greatly appreciated 👍
If there’s one not registering it may be a fault with the wheel sensor. It may reset, it may need replacement.
So helpful! Thank you.
You’re welcome thanks
Thank you sir!
You’re welcome thanks
helped a treat, thanks.
Glad it helped!
Accessing the "Learning Tyre Pressure" feature, I have found another way to do it, without having to inflate the tyres more than is needed. By teaching the computer a new PSI. With the vehicle standing still, you can set a new or an existing tyre pressure. Fresh start the engine with the hand brake engaged and navigate to the "Tyre Pressure PSI" menu screen. Keep pressed for 3 seconds the Set/Clear button from the head of the left stick and it will get you into the "Tyre Pressure Learning" menu screen with 2 options "Yes/No". Choose "Yes" twisting the little arrow bit from the left stick and press the Set/Clear button to activate it. If you heard the horn honking twice, that means you have correctly set the computer to learn the new tyre pressure. Don't stop the engine and drive for a few miles. The TPMS warning light should disappear from your dashboard. Cheers✌️
Opel tyre pressure sensors pair
Have you got airbags warning lights video version on VAXHUALL MOKKA X 2017
Not at the moment. Try unplugging and plugging back in a few times the passenger side contact plug under the seat. Key out of the ignition when you do it.
@@redram52 , thanks for your response, I checked the both driver and passenger side. even I watch so many videos on you tube but I can't find the yellow plug wire under the seats. There's no 2017 plates video on you tube
Where is the fuse box?
Next one that comes in I'll have a look