Mini Tiller Won't Start? Here's Why
Vložit
- čas přidán 12. 12. 2020
- In "Double Play II", Uncle Andy returns from prison to re-open another sports collectibles shop in Taryl's shop. After the intro and before the ending, Taryl goes over what it takes to get this Echo mini rototiller running again. This is a small 2-stroke tiller with a Zama carburetor. So sit back, laugh and learn a thing or 2 with the master himself, Mr. Taryl Dactal. And as always, There's Your Dinner!!
Subscribe Today! (Click the 'Subscribe' button on this channel!)
Be sure to 'Like' Taryl on Facebook!
/ tarylfixesall
And Follow him on Instagram! @tarylfixesall
/ tarylfixesall
Pick up YOUR Taryl Apparel Here! (Shipping Worldwide Daily)
www.TARYLFIXESALL.BIGCARTEL.com
Get Your Parts From www.ProPartsDirect.net and Tell 'em "Taryl Sent Me!"
Grass Rats Garage Theme Music Available!!
Pick up a physical copy on CD from the Taryl Online Store:
tarylfixesall.bigcartel.com/p...
#echo #minitiller #tarylfixesall #grassratsgarage #2stroke #2cycle #echominitiller #tiller #plow #smallenginerepair #funnyhowtovideos #uncleandy #doubleplay #repair #diy - Jak na to + styl
Support the channel! Grab yourself a Taryl T-Shirt, Coffee Mug, Tools & More! Shipping Worldwide Daily from the Taryl Apparel online store!
www.TARYLFIXESALL.com
how about the podunk professor
There was a store in my town back in the late 90s called double play it sold the same stuff and rented movies and had a pool table lol I played there every Friday night for a whole summer memories thanks guys I needed that
Woo Hoo another video. This Sunday just got better!!!
Can't beat taryl on a Sunday afternoon keep up the great work merry Christmas. 🎄
"If you own a shop you shouldn't be watching this, you should be fixing equipment" 🤣 well said! Thank you brother!
For all the help!
It’s good to laugh and I enjoy it
Work is AllWAYS work
I love this channel, always great information, and procedures.
I get a few easy cases, but more than my fair share of bigger problems. A gentleman gave me a power washer, he said he thought it had bad gas. When I checked it out, it had no compression, I checked the valve adjustment, fine. Pulled the head (OHV) needed a valve job.
I see guys get mowers, chain saws, weed eaters, and just need a few adjustments and they work fine. I get the stuff that needs coils, and carburetor work. I enjoy working on them though, and when I get done they run great.
However, I have a good many that just needed minor adjustments. So I'm good.
If I yelled like you do after a repair job I would get so light headed I'd pass clean out. Good video as always.
WOW.Taryal Stens gives love notes on their parts.
Great vid Taryl. I fly large RC Gas engine warbirds and learning everything you can about carbs is very valuable info
Excellent job on the carbatratior rebuild. Those Echo tillers are great lil machines. Lifetime warranty on the tines, too.
Perfect Sunday, Mustie1 & Taryl
Pour that gas into a musty coffee cup 🤣
@@buddyg1408 Hah that would be great!
I been on my knees 40 years doing concrete work I am good can still walk a mile every day lol.God bless y'all real good.
Good for you man! God Bless, and keep up your walking.
I dont need to learn anything about lawn equipment I just watch these videos because there hilarious keep up the good work bud
Thanks Taryl! Very informative. Merry Christmas to you and the crew!
Unfortunately for me , or fortunately I guess I have only just discovered your channel. Love your work sir and I’m learning a lot and the comedy skits are amazing too. Thank you 🙏
Thank you so much for posting this video! Because of you I was able to fix the broken fuel line on my tiller 🤗
Love the informative videos Taryl. Gotta get some more of these.
Thank you for your videos and explaining things properly.. much thanks
Love it! Keep up the great work!
👍Good stuff T! I bought a 4 cycle MANTIS like this one. Didn't want the gas and oil mixing BS! I slit seeded my yard. Enjoy using it too. Talk about a workhorse!!! Worked great and results were so much better than just throwing seed and covering w/ soil. I guess it aerated the ground too. If you're on the fence w/ buying one of these cultivators.... pull the trigger!! You'll be glad ya did. ✌️👍
Thx Taryl. Good info.
That was an excellent video on how to repair a Zama carb. Thanks for learning me something. Merry Christmas.
THANK YOU! Recently picked up a hedge trimmer with a zama carb, wont run hot, needs a good go through. Having troubles finding a kit though because my carb model is listed as discontinued. 😢
thanks for your vids and hope all you folks are well
You guys are great!!
I agree. I watch you for the entertainment but I have picked up some great tips on how to do fix small engines. Thanks. Happy Holidays
Great video guys. Keep up the good work.
We have a carpet business in our town ( won't mention the name ) but their motto is BLANK CARPET " THE BEST LAY AROUND ". GREAT VID. AS ALWAYS TARYL, VERY EDUCATIONAL FOR US HOME GUYS, T.Y. SO MUCH, Henry from PA.
Another great video! Funny and informative as usual. I’ve learned a lot from you!
I can't get enough of taryl fixes all
All round great video, enjoyed that thanks 👍
41:58 Nothing says "aim for the middle" like giving your kid a Hot Wheels of a Honda Odyssey.
Nissan Leaf
COOL! spent a lot of time running a tiller just like that one ...
It’s about time Terryldactor put another video out. You wouldn’t believe all the different carb kits zama sells for these small 2 stroke engines(oops I meant motors). Nice thorough job there Terryl
Thank you for the baseball card Uncle Andy! I learn something every video Taryl! Good work Cameraman!
Loved it.... Thanks. Appreciate ya.
I like anything funny and this is one of the funniest channels on CZcams. The How To knowledge is just added bonus. Always great videos! Big time entertainment. Lots of laughs. Keep em coming.
I really enjoy your videos. Thank you for making them. Best to all. :)
Great video Taryl!
Wishing you and the guys a very Merry Christmas 🎅 🎄
I learn alot by watching ur video's keep the videos coming
Love it all , Merry Christmas Taryl
I beg to differ, I own my own shop, and I still come here, but I come here for haircare and teef tips..... You all crack me up, keep the videos coming, and uncle Andy is up to no good for sure.
Similar story here,been doing this stuff for decades but I love the entertainment...and iv learned a few things along the way,it never hurts to watch how someone else skins a cat😉
@@wolfmanrebel874 exactly.
I agree. I have my own shop but I come for the entertainment
Just inherited a mantis/echo tiller. Gonna have to do much the same to it,plus a throttle cable. It hasn't ran in ten years. Thanks for sharing your knowledge and skills. Happy Easter!🙏
Guys, your videos are great. Tarryl should be nominated for an Oscar :-)
Oscar Madison, from the 'odd couple ? "" or Oscar, manager at i Power in California ? (generator makers) ?
Like watching your very informative videos...keep them going...
Best part of the day..... thanks!!!!
I love the little background soundtrack on these videos
When he talks about his fingers, "tentacle like" they have a great sound effect , I was surprised they didn't play it.
More cowbell
Thank you!!!
Thanks Taryl this is super helpful you have a great way of teaching unlike most the people I have watched on CZcams that act like your a brain dead preschooler and explain things that anyone that is going to work on their own or someone else's stuff is clearly gona know you cut to the real detective work and show and explain what needs to be done and in a very entertaining way so Thank You😁😁
thanks taryl great video
Mate! I love your videos so much. Soo funny and insightful. You’re de man!
Thanks for the videos 👍
Thank you
I had a herd of Volkswagens in the 1990s. Yeah, had a lot of fun. Learned everything about them. Hey, they were all junk when I got them... Already half buried in the grave. But i resurrected all of them. I learned how to keep them alive, road worthy, and even stepped to building a few "race" motors: custom casted pro-modified heads, Engel Cams, 4-Tuned exhaust, Weber 48IDAs, high performance Demello cranks, yadda-yadda... It didn't happen in two steps. More like a 3 years journey. Because I started from scratch: I just returned from 4 years of hut-two-three--four...US Army. So i got good at tuning(stock) engines... Pretty much mastered the Solex, Weber, Dellorto, and Kadron induction systems. Well, I learned that them 25-30 year old engines and carbs(especially) get old and wore out. But they still run! And after you have the cases remachined, rebuilt and even replace a bunch of stuff with NEW parts, you have a great vehicle. Nothing else like dumping the throttle on two 48IDAs! DaaaaWooosh! You could hear them toilet bowls flush. Then i purchased a '89 IROC-Z, with the L98(350-V8, Bosch TPI Fuel Injection...). Gobbs of torque! ...But now I had to learn fuel injection...! "Just because ." Well, after 3 years of owning the IROC...I only had to have the injectors flushed ONE TIME! IT NEVER BROKE DOWN! So I have a small stable of Stihls now. Learning about them Zama carbs... an entirely different mode of carburetion. It's all about setting the "base idle": rpm,idle mixture and timing. And cleaning that dang spark arrestor screen. Them yard machines work in a dusty dirty environment!
Uncle Andy....he is the man.
taryl your the best! i had 2 strokes myself and still learrning!
One of your best men. I know you read some of these so... Thanks.
I like the fire it fire it up.......cracks me up.I enjoy your channel.
I think I have blown out that check valve on a couple of Carburetors! Glad to learn about that now. I have cleaned and/or rebuilt them and then they siphon the fuel out of the tank when not running.
It is so easy and cheap to find a knock off carb on Amazon these days, but I really prefer to rebuild the originals when possible. Just look at the casting marks and machining on the ZAMA carbs, it is far an above the ones I have gotten from Amazon. Thanks for all the tips Taryl!
I have got a few from ebay, and had good luck. On one chain saw the replacement carburetor the throttle was slightly different, but a simple bend in the linkage rod, and it worked fine.
Great job
Thank you for the video
New Taryl! Yay!
Good Job of Explaining That ECHO 👍👍👍
Great video Taryl I also use carb spray to check an engine no problems at all
I am sending Taryl coffee cups for Christmas.
There is no way you got that grommet into the fuel tank that easily. You're the man Taryl!
Vaseline is what I use and ky in house Lololo 😅
Awesome job
Is it bad if I don’t have any of the equipment he works on but I still watch every one!!! Wooo hooo!!!!
I learned the hard way on a lawn mower carburetor sprayed right back in my eye I was definitely awake after that lol.
I've pulled those check valves out before with a wood screw, and the bigger main jet check valve can be driven straight through into the carb throat and removed... but it's still usually better off to replace the carb by the time you figure in shop rate, especially if the carb still doesn't work right and end up being replaced anyway.
Good instructional video
Awesome vlog 👍👍
Actually I was thinking you should put the tiller on a bench and save your back.
I have an old Mantis that looks exactly like the Echo you just serviced that is having issues. I wonder if they are twins!
Yep those are made by echo for mantis
LOL, I love the dramatic music.
yep carb spray does hurt when it gets in your eyes but not half as much as a spark from a grinder thanks for the video guys
Agreed.
I spent a life time of working on various Industrial/Commercial machinery with half that time having to work on my knees, sometimes on my stomach. What doesn't Kill you makes you Stronger. From your friendly Neighbor in Louisville (an area we call Kentuckiana).
Man, I bet I've ruined every carb I've tried to rebuild. I don't think I've ever seen a video where someone say anything about the check valve. I thoroughly clean out every hole. Thanks for the lesson.
Hey uncle andy is back in town! If it wasnt for taryl and his lawnmower and small engine repair of all kinds, there would be no good repair advice,dont forget taryl to charge uncle andy 20% of his sales.
great video seen you on Micks live today. ill be watching
21:45 RIGHT ON. ! Some of us, REAL PEOPLE, have to, and MUST call a 'spade' a spade. Twitter, sh**book, and others, make young people, devoid of history knowledge, geographical knowledge, and other 'real world '' wisdom, and analytical skills. Anyway, enuff - stuff. Thanks, Taryl for education to ALL VIEWERS, for 2-cycle carb knowledge. Same atmospheric pressure, gravity logic as 4 cycle engine carbs, but a bit different methodology of using them. We all need this, folks, as the world is full on sitting, non-working small motor 'stuff'. I redo generators, all aspects. BE safe, folks !.
Dang it Teryl! I got exited when you were going to change your pad but then you started playing with your diaphram!
Thank you.
I had to rebuild the carburetor on my Mom's Mantis tiller with the Zama carb and had the check valve in the main jet leaking and you have to pull the main jet out to replace the check valve. The guy at the lawn mower shop didn't carry it and I had to order it from Zama. The guy said the carb would never be right if I replaced the check valve but I managed to change it and the tiller ran smooth when I finished. If the check valve in the main jet is leaking you won't be able to get the tiller to idle properly. Zama had a good description on their web page on how the carb works and how to check things.
Very very well done. Thank You Sir. Merry Christmas to the entire gang. Wear your mask. Save your knees for old age. 'Warsh your socks'!
Hi I hear your going to be joining micks mowers on a live stream, I know mick well it will be nice to see you on his panel. Lately I’ve upped my content on my small engine channel. Love your vids🙂👍
Dead on about lift tables being clutter collectors. Have three of them and it seems like every time I want to use one of them, I have to un load it first, but it sure does make the work a little bit easier on this 72 year old back.
You preach and I'll turn the pages bud.
Like a pool table 😂
Yes Sir I know the 72 old diesel mechanic back but it’s really not much harder working on small engines as qsk50 or isx
Working on mini tillers is a pain sometimes. Very finicky with adjustments.
A little late to the party. I was busy fishing the pacific. Wanna say I got my order of HV-350 and tube gripper. Extra thanks for the Uncle Andy signed Kevin Mitchell rookie card! And for the complimentary tidy-tube winder! I’ll be using that for my toothpaste tubes.
I can't believe anybody would give you a thumbs down with the education you give for FREEEE . I fix all my chainsaw weed eaters and lawn mowers after watching Grass Rats
Sadly there’s a lot of A holes out there
Good video!!!! That echo is way better than that craftsman with pee poo .. err.. I mean P2 'technology'!
Great!
Bubba Ho-Tep is great!
I’m going out to the garage right now to tear up my Echo TC-210 tiller/cultivator.
I loved this episode (except for the part about stabbing the check valve... I may have done that before).
Most of us know we just love watching your videos lol
Teryl is the best!
The eyes attract brake parts cleaner too... ouch.
And lips,
Dr Taryl the well respected lawnmower Surgeon! Lol
I like this show
Nothings better than Taryl pronouncing carburetor as carbetrator😄
Nice video but maybe should have put the lines in before re-installing the carb!