Ultimate Beginners Guide to Using Electric Motors for Makers and DIY Projects;

Sdílet
Vložit
  • čas přidán 2. 06. 2024
  • An introduction to motor types, power, and references to how to wire, speed control, and use all the common types of motors with a focus on reusing motors salvaged from appliances and other sources. Steppers, BLDC, PMDC, single and three phase, universal motors, and more
    If you want to chip in a few bucks to support these projects and teaching videos, please visit my Patreon page or Buy Me a Coffee.
    / jeremyfieldingsr
    www.buymeacoffee.com/jeremyfi...
    Social media
    Instagram jeremy_fiel...
    Twitter / jeremy_fielding
    My websites www.jeremyfielding.com
    www.fatherhoodengineered.com
    My other channel - Fatherhood engineered
    / @fatherhoodengineered
    ************************************
    Notes:
    One Playlist with all the videos.
    • Beginners Guide to Usi...
    R#1 Introduction to Gears (Beginning of Video) • How I Design And Cut M...
    R#2 Using Pulleys • 7 Tips For Best V belt...
    R#3 How Single phase motors Work • How Motors Work For Be...
    R#4 Wiring Single phase motors • How To Wire Most Motor...
    R#5a Single phase Speed control problems part 1 • Will A Dimmer Switch o...
    R#5b Speed control problems part 2 • Speed Control for Shad...
    R#6 How 3 phase motors work • How Motors Work for Be...
    R#7 Run 3 phase on Single phase • Three Ways To Run A Th...
    R#8 How Universal motors work • How Motors Work for Be...
    R#9 How to wire Universal or DC motors • How To Wire A Large DC...
    R#10 How DC motors work • How Motors Work For Be...
    R#11 The treadmill speed controller • Building A Variable DC...
    R#12 How Steppers work, and Using them with Arduino • Stepper Motors with Ar...
    R#13 Intro to Motors and BLDC motors • Brushless DC Motors an...
    Bonus 1: How to reverse your motors direction • How To Reverse the Dir...
    Bonus 2: Motor video library project. • How I Plan To Create T...
    FAQ from the comments
    1. What do you do with all the motors?
    You might be new here, but nearly every project on my channel has an electric motor in it. I love making things that move. Also I create teaching videos (like the one you just watched), so I am looking to collect as many different motor types as I can find, then create videos about how they work and how to use them. Check out bonus 2 from the references above.
    2. Can you make a generator/windmill/ etc with these motors?
    Check out my series on the generator project. You will learn a great deal there.
    • How To Make A Generator
    3. Which motors can you use in a go kart?
    I have a series of videos about my electric go kart.
    • Converting A Go Kart t...
    Technical corrections
    Nothing yet.
    Final Note:
    PLEASE UNDERSTAND...I receive hundreds of messages on all platforms (email, Facebook, comments etc) asking for advice, and help with projects. At this volume, I simply can't do one on one advice.
  • Jak na to + styl

Komentáře • 3,8K

  • @2049bits
    @2049bits Před 5 lety +3279

    Smart man, well spoken, info per minute rate ( IPM) is great! THIS is a CZcams, Best Use: shared Experience. Thank You. Subscribed!

    • @LaneLarson
      @LaneLarson Před 5 lety +45

      I second this. Excellent all around!

    • @jakeschrag
      @jakeschrag Před 5 lety +25

      I was about to leave this same comment befor I saw yours. Thumbs up

    • @MisterKaen
      @MisterKaen Před 5 lety +19

      I agree with you 100%

    • @2049bits
      @2049bits Před 5 lety +7

      @@jakeschrag thanks for your support of making YT great!!

    • @slowburntm3584
      @slowburntm3584 Před 5 lety +20

      I don't subscribe after one video very often, great video, thanks!

  • @markproulx1472
    @markproulx1472 Před 4 lety +2008

    This can't be CZcams. There's no stupid music. The presenter gets right to the point and provides supremely useful information. I'm confused.

    • @coguard3798
      @coguard3798 Před 4 lety +15

      your not alone

    • @firuzpulatov7750
      @firuzpulatov7750 Před 4 lety +9

      I was planning to fast-forward/skip the video, but continued to watch it because of your comment. Thank you!

    • @firuzpulatov7750
      @firuzpulatov7750 Před 4 lety +2

      @Zane Zuccaro obviously youtube trends ;)

    • @fritzwilhelm8258
      @fritzwilhelm8258 Před 3 lety +3

      I also am struck relatively silent. Except for now...

    • @seanbaldeschwiler1891
      @seanbaldeschwiler1891 Před 3 lety +3

      Indeed it is Mark. How are things on the farm?

  • @williambarnes7948
    @williambarnes7948 Před 4 lety +634

    "Fat kid on a see saw" this man speaks simple truths!

    • @cameron-wy4wd
      @cameron-wy4wd Před 4 lety

      Haha

    • @fredprater5012
      @fredprater5012 Před 4 lety +25

      when you're the fat kid there are no see saws only catapults

    • @1414141x
      @1414141x Před 4 lety +3

      Cruel, but a great analogy !

    • @omni574
      @omni574 Před 3 lety +3

      @@fredprater5012 I was the fat kid, can confirm.

    • @JareBareXP
      @JareBareXP Před 3 lety +4

      I'm a fat kid and my see saw felt this

  • @stevelasher422
    @stevelasher422 Před 3 lety +342

    This guy is like the Bob Ross of Electric Motors. Stays in his lane, and gives TONS of great info. I could listen all day and I'm not even an electrician. Just awesome.

  • @padler5106
    @padler5106 Před 3 lety +146

    I've spent 40 years in the electrical end of industrial machinery and I know a lot about motors and controls. Jeremey taught me a few things watching this video. Well done. Smart man and he knows what he's talking about.

    • @flyback_driver
      @flyback_driver Před 8 měsíci +3

      I agree. When I started really tinkering and designing projects I've wanted to for years this is where I started. I think what I really like about his content is the layers. It probably took me (from zero) three years to completely grasp the information in this video and actually apply it. I'd watch it and then learn basics about electrical circuits. Come back apply the electrical design knowledge and get more from videos like this. It wasn't until I was designing my own vfd for my lathe to run a three phase motor that everything sank in and there's probably so much more I still don't know. "There are known knowns..." Haha Donald Rumsfeld always comes to mind when I think about the fact there's information I don't even know I'm missing but yeah man it's been two years. Come back and see if there's even more you might learn.

  • @vimalakirti3908
    @vimalakirti3908 Před 4 lety +251

    I respect any man who drags a wood-chipper home to pull the motor.

    • @vimalakirti3908
      @vimalakirti3908 Před 3 lety +6

      @CW NunyaDamnBiznez I drag home anything with a wire

    • @baburaospeaks2429
      @baburaospeaks2429 Před 3 lety

      @@vimalakirti3908 😅good one

    • @ruinunes8251
      @ruinunes8251 Před 3 lety +1

      Vimala Kirti
      You just made me laugh lol

    • @ruinunes8251
      @ruinunes8251 Před 3 lety +6

      Now imagine him dragging the chipper home just to find out that the neighbour already took the motor out😂😂

    • @philldavis5778
      @philldavis5778 Před 3 lety +3

      @@ruinunes8251 I imagine he would check that before dragging it home lol, he seems a little to intelligent to make that sort of mistake. I on the other hand have made that mistake 😂🤣 I'm so glad I have come across this channel as I've been dragging all sorts of appliances home and taking the motors out of them with the intention to learn how to reuse the motors, I've got milk crates full of motors now and finally I've found someone that explains things in a way I can understand. This is the first of his videos I have seen and I subscribed in the first 2 mins.🙌🙌😁😁

  • @matthewwilson4592
    @matthewwilson4592 Před 4 lety +192

    This is CZcams at its finest. No BS, no gate keeping, no talking down. Just good info with a nice defined scope and purpose.

  • @kyleloudon
    @kyleloudon Před 2 lety +55

    I’m a mechanical engineer and just wanted to say that you are a great teacher and I really appreciate your videos. Please keep doing what you’re doing!

  • @Poljski
    @Poljski Před 3 lety +129

    I have been through high school and collage for Electrical Engineering but none of the teachers could explain these principles in such an easy to understand manner, I am truly in awe. Thank you very much for sharing this knowledge!

    • @davidsawyer1599
      @davidsawyer1599 Před 3 lety +6

      Hello
      My brother in-law is a software engineer. In other words he's bad cholesterol. Of no use. Makes every day things insanely over complicated.

    • @bnb7094
      @bnb7094 Před 2 lety +1

      There's No use for an education that doesn't teach you how to figure things out yourself. If there was, you'd be taught the basics so you can build upon them and actually learn the subject matter.
      Memorization is not knowledge.
      Information/data is not knowledge.
      A book on a shelf or an internet search engine is not knowledge.
      Applying information to your daily life is knowledge.
      If you can't make it work then you do not know it.

    • @Mr.8r1c3-8usch
      @Mr.8r1c3-8usch Před rokem

      Im hoping you wrote 'collăge' instead of 'college' on purpose. 🙂

    • @Mr.8r1c3-8usch
      @Mr.8r1c3-8usch Před rokem

      @@AJNoon I Fukin' knew it!!!!!!! Lol

    • @nxbeh9975
      @nxbeh9975 Před rokem

      Hey do you know any other channels that are as good as this guy

  • @jorgedante007
    @jorgedante007 Před 5 lety +457

    Perfect!! No background music !!! No distractions,easy to understand.😊

  • @christopherdahle9985
    @christopherdahle9985 Před 4 lety +55

    This is what I want to see on CZcams, real information from someone who knows what he's talking about.

  • @SEThatered
    @SEThatered Před 2 lety +1

    I am glad your channel got recommended to me. Once in a while algorithm works.

  • @H0mework
    @H0mework Před rokem +5

    Your ability to speak to the layman and teach complex subjects without resorting to jargon is incredible. I'm subbed!

  • @user-sc5ob5ek9h
    @user-sc5ob5ek9h Před 3 lety +244

    Learnt more from this guy in 10 min than my 3 years in technical school.

    • @TheBinklemNetwork
      @TheBinklemNetwork Před 3 lety +3

      sounds like its time for *puts sunglasses on* you to cut your losses. YEEEEEEAAAAAAAHHHHHHH

    • @chrisrose774
      @chrisrose774 Před 2 lety

      M

    • @chrisrose774
      @chrisrose774 Před 2 lety

      Frin k. Mrinov

    • @KatoOnTheTrack1
      @KatoOnTheTrack1 Před 2 lety

      That’s not good. We’re you listening in class? This is strange forward stuff with respect to motors.

    • @dubmob151
      @dubmob151 Před 2 lety

      @@KatoOnTheTrack1 did you really mean straight? That's strange otherwise.

  • @RealEngineering
    @RealEngineering Před 5 lety +1285

    This was great.

    • @natedunn51
      @natedunn51 Před 5 lety +69

      well if real engineering says it's great, must be worth watching.

    • @Zlugs
      @Zlugs Před 5 lety +6

      What are u doing here buddy *insert lenny face*

    • @elguapo1690
      @elguapo1690 Před 5 lety +7

      I wonder if I'm here because of Real Engineering...

    • @bureaucratbayonet
      @bureaucratbayonet Před 4 lety +2

      I saw the title and thought it was a real engineering video

    • @mr.waffentrager4400
      @mr.waffentrager4400 Před 4 lety

      OOOOOOOOOHHHHHHH....

  • @thisoldminewithlars5324
    @thisoldminewithlars5324 Před 8 měsíci

    Any time I have a question about motors, I simply refer to Jeremy’s videos. He has something about everything.

  • @kennymiller4428
    @kennymiller4428 Před 3 lety

    how could anyone, NOT, like this video

  • @01blackhat
    @01blackhat Před 5 lety +289

    I'm watching you for the first time, and what first struck me is, if you are not a teacher or instructor in your professional life, you are keeping a gift from the world. You got that.

    • @CortMarshal
      @CortMarshal Před 5 lety +18

      This video ALONE has reached 180,000 people so far. I'd say he's not worried about keeping things from the world...

    • @sixtycats8652
      @sixtycats8652 Před 5 lety +5

      @@CortMarshal hey come on dont be like that. no need to be needlessly confrontational.

    • @greekkidshows9373
      @greekkidshows9373 Před 5 lety +15

      @@sixtycats8652 I don't think he is
      He is having a hard time saying thank you & that he is good at what he is doing. That he should be a teacher because all his students will learn! Unlike most teacher's that can only teach those who already know some. Those teacher's usually need to be corrected at least on a few occasions

    • @AndyNav1
      @AndyNav1 Před 5 lety

      Agreed 100%!

    • @sixtycats8652
      @sixtycats8652 Před 5 lety +3

      @@greekkidshows9373 true.

  • @MahmoudSuhail
    @MahmoudSuhail Před 2 lety

    This man should be well supported. And it’s the second time I say such a thing since started using the internet.

  • @SamieMac1
    @SamieMac1 Před 2 lety +1

    I think it's pretty cool that the smartest guy on CZcams is humble enough to tell you up front he could make a mistake..

  • @leebrewer1190
    @leebrewer1190 Před 5 lety +412

    You, sir, are a GREAT teacher. You are logical, organized, and easy to follow. The quality of your content is something that would take forever to piece together into a coherent source from other bits and pieces of info scattered through books and the internet. This from a researcher and professional teacher.

    • @reaDm4earl
      @reaDm4earl Před 5 lety +9

      Agreed

    • @DavidTangye
      @DavidTangye Před 5 lety +6

      @@REL602 I can't believe you didn't learn a single thing. no you won't learn everything all at once and you may need to replay it perhaps two or three times or more. however I can assure you that many beginners should be able to get a heck of a lot out of this sort of video if they set their mind to it. You also need to take notes off anything that you don't understand and go look elsewhere to explain those specific things. Don't be lazy. Learn how to learn. Hopefully they tried to teach you that at school..

    • @JeremyFieldingSr
      @JeremyFieldingSr  Před 5 lety +19

      @@REL602 This particular video is focused on how to apply the various motors for beginners. You would really enjoy the "how motors work" playlist. There is one on three phase as well as all the types. My personal favorite is "how motors work; DC motors". It is the very beginning of understanding motors. They are linked in the description as I described in the video. It was just too much detail for one video, so I pointed you to other videos where I explain those kinds of things. I promise it will explain at the most basic level what three phase is, and any other motor question you might have in that series.

    • @ayporos
      @ayporos Před 5 lety +1

      Really? I wouldn't rate him a 'GREAT' teacher.
      He is constantly mixing his words (for instance saying power where he meant torque) which is quite confusing if you don't already understand the concept.
      I'll concede that he does know what he's talking about and his intentions are good, but such blatant mixing and mashing of wrong words I cannot appreciate.

    • @fidelismutya1876
      @fidelismutya1876 Před 5 lety +2

      Awesome thanks

  • @MucaroBoricua
    @MucaroBoricua Před 5 lety +83

    I wish all CZcams videos were concise and informative like this one.

  • @rrmusicman1
    @rrmusicman1 Před 2 lety

    Jeremy, just to let you know this old eight plus year old loves your videos don't stop making them. Thanks

  • @bryanfarrow914
    @bryanfarrow914 Před 2 lety +1

    As a qualified, tradesman armature winder for over 40 years, I can assure viewers that this bloke knows what he's talking about.

  • @futureshock382
    @futureshock382 Před 4 lety +253

    CZcams reccomending something that DOESNT kill my braincells? Did I shift realities again?
    Great video, very clear and dense with info

  • @beckwil0852
    @beckwil0852 Před 4 lety +3

    I am a 67 year old grandmother who wants to learn more. Your video is one of the best I have ever watched on CZcams. I actually learned something rather than listening to someone who just likes to hear themself talk. Thank you and keep making these videos.

  • @SeeSaw72
    @SeeSaw72 Před 3 lety +1

    Excellent description on various motors available to us home engineers.

  • @Good-Enuff-Garage
    @Good-Enuff-Garage Před 2 lety +1

    The best video on motors on CZcams ! so we can not use a potentiometer on a motor, I am a total newb, trying to learn this stuff

  • @timlucas143
    @timlucas143 Před 4 lety +27

    Jeremy is a legend at explaining things accurately and concisely.

  • @harlanbaker7476
    @harlanbaker7476 Před 5 lety +156

    I've been called a hoarder because i save perfectly good motors out of things. at work we replaced an 800 dollar pump, i took it home and removed the pump and swapped the squeaky bearing and it works great. I wish more people would realize that its not trash and things can be fixed.

    • @RickTrajan
      @RickTrajan Před 5 lety +8

      Components with smaller components can only need a small component but is the time for diagnosing, looking for those specific parts, chances of wrecking more things and down time of the equipment worth it? I personally think that learning to breakdown and understanding components to it's smallest component have some utility but the industry for the most part doesn't - except for people who work on machinery I'd say.

    • @soarer282
      @soarer282 Před 5 lety +11

      I am guessing you don't work in China, Russia or India.

    • @RickTrajan
      @RickTrajan Před 5 lety +1

      @@soarer282 if you're talking about me you are right.

    • @peetre
      @peetre Před 5 lety +1

      Sorry, I see a divorce in your future!

    • @destroyer4416
      @destroyer4416 Před 5 lety +3

      If i ask to take a broken motor home i can't so yeah there are more people that wanne fix "trash" but most are not allowed

  • @bernardwind1633
    @bernardwind1633 Před 2 lety +1

    Eloquent explaination, love your candid delivery style

  • @sailingheretic
    @sailingheretic Před rokem

    BTW, you are obviously the type of super-smart dude I admire…the type whose knowledge is based on real world experience!

  • @dead_warrior_wae
    @dead_warrior_wae Před 4 lety +6

    one of the last remaining 'straight to the point' channels. what a gem

  • @Kieran0
    @Kieran0 Před 5 lety +366

    "you put a fat kid on a see-saw" SUBSCRIBED

    • @SteveJobzz
      @SteveJobzz Před 5 lety +20

      Engineers can't be bothered with this PC crap..

    • @zlotvorx
      @zlotvorx Před 5 lety +10

      @@SteveJobzz In my mental image there was you and Kenny on a see-saw :)

    • @freggo6604
      @freggo6604 Před 5 lety +9

      Can't wait to find the first negative comment about this 'insensitive' way of telling it as it is.
      As for me, I liked it :-)
      Way too much political correctnes out there.

    • @jaykyu1
      @jaykyu1 Před 5 lety +4

      If the fat kid just had lunch, he has to sit closer to the FULL-CRUM while the skinny kid farther from the the fulcrum or the see-saw will be tilted to one end and the skinny kid could fly over the fence. :/ that's torque in PCics.

    • @bobinthewest8559
      @bobinthewest8559 Před 5 lety

      PC police, watch out... lol

  • @MikeRobinson-ur8tv
    @MikeRobinson-ur8tv Před 2 lety

    Ya this guy is the first person that's been able to break this down so that I get it lol.

  • @nelsontheseagull
    @nelsontheseagull Před rokem

    3 years later and I am coming back to watch because I have a specific project. This is free school for me. Thank you

  • @zapatatapaz
    @zapatatapaz Před 5 lety +182

    Clear, with abundant information, and the consciousness of countries other than the USA existing, thank you.

    • @JP-xd6fm
      @JP-xd6fm Před 5 lety +20

      True, so hard to find such a nice american just not thinking USA is the entire world. And also, very nice accent, I'm not english speaker and I understood all of it... well I had to google what a treadmill was lol

    • @tomyy666
      @tomyy666 Před 5 lety +2

      Great way to put it.

    • @iian_
      @iian_ Před 5 lety +4

      ​@@JP-xd6fm You realize that this is how most middle class people speak in the U.S., right? Also you are on a platform based out of our country. So who is the one being rude saying you should be included?

    • @JP-xd6fm
      @JP-xd6fm Před 5 lety +2

      @@iian_ Sorry, movies, music ant tv gave me a bad idea of how the afro-american people speaks, for example for me is hard to follow Dave Chappelle's stand up or Chris Rock, maybe also because they speak so fast, lol.
      What do you mean I'm in a platform based out of your country? , I don't get that.

    • @Styno91
      @Styno91 Před 5 lety +5

      @@iian_ What is that supposed to mean? "CZcams is American, so everyone outside the US should either stand in line or fuck off" ?? Im guessing that kind of thinking is the exact thing Francisco, backed by J P meant.

  • @kaden56
    @kaden56 Před 5 lety +54

    This guys channel is gold. He’s on my top 10 recommended for engineering friends.

    • @JeremyFieldingSr
      @JeremyFieldingSr  Před 5 lety

      Thank you! A Recommendation is the greatest compliment

    • @Yonatan24
      @Yonatan24 Před 5 lety

      And Matthias Wandel
      Marius Hornberger
      Jer's woodshop (did he change the name?)

    • @erict964
      @erict964 Před 5 lety

      @@Yonatan24 Jeremy Schmidt

    • @rid359
      @rid359 Před 5 lety +2

      Top 10!!??? Top 1 I’d say!

  • @tonylawless5626
    @tonylawless5626 Před 2 lety

    In case nobody told you today I just wanted to say you're amazing my friend keep up the great work. You inspire me

  • @rubertdandsalceda3861

    WOW. THIS GUY SHOULD BE HIRED TO GIVE PEOPLE BAD NEWS IN A GOOD WAY. He's very engaging,well spoken,and educating!

  • @0MoTheG
    @0MoTheG Před 4 lety +223

    Now I look differently at treadmills. Now I think they are "useful".

  • @jonrok8576
    @jonrok8576 Před 5 lety +97

    Can't recall seeing anything on yt without at least a few loudmouth know-it-all/troll comments...I scrolled down a good 2-3 pages & only saw gratitude & respect... & I totally agree with them. Good work man. I wish my organize could mind function so & effectively!

    • @LBCAndrew
      @LBCAndrew Před 4 lety +1

      Agreed. Though it makes me wonder who those 432 people are giving the thumbs down.

    • @JordanBartholme
      @JordanBartholme Před 3 lety

      Did what you see there I do.

    • @JordanBartholme
      @JordanBartholme Před 3 lety

      @@LBCAndrew Haters.

    • @R3lay0
      @R3lay0 Před 3 lety

      @@LBCAndrew Most likely Austrialians.

  • @Silkroads733
    @Silkroads733 Před 2 lety

    this is why its said that we all have are gifts, this man was born to teach and be excellent at it.

  • @Wbjpen
    @Wbjpen Před 3 lety +30

    I don't know where to begin. I appreciate these videos so much. I just found this channel from reddit and can hardly believe the quantity and quality of these engineering videos.
    Mr. Fielding has enthusiasm, clarity, and technical prowess in abundance.
    Thank you!!

  • @eilertb1310
    @eilertb1310 Před 3 lety +49

    Jeremy, you are fantastic at getting your message and knowledge across to us. You have a great blend of taking technical specifications and merging it to real world applications. Keep up the great work, I can’t stop watching your videos and I’m excited to see more.

  • @Smershsh
    @Smershsh Před 3 lety +6

    I just found this channel, this is the 5th video i'm watching in a row. My weekend is shot now.

  • @abebaabeba484
    @abebaabeba484 Před 2 lety +1

    Hi, Jeremy Fielding
    1. You explain motors in concise
    2. Your voice and your English is excellent
    3. Deep knowledge
    4. Good you wrote some words
    Do it more !!!!!!!

  • @mackdaddy1891
    @mackdaddy1891 Před 3 lety

    Let me just say brother you are one hell of a teacher

  • @hgbugalou
    @hgbugalou Před 5 lety +39

    Great info. You have made it where I strip motors out of anything I throw away.

    • @Alkatross
      @Alkatross Před 5 lety +1

      Me too! I rip motors of all sizes out of my old junk. Even tiny motors. Cd drives to vacuums to garage doors

  • @surfinpsych
    @surfinpsych Před 3 lety +8

    How am I just now finding this? You are amazing, sir.

  • @hanlines
    @hanlines Před rokem

    Mr. Fielding is one of my favorite makers and teachers anywhere.

  • @walkingthruyourdata-6019
    @walkingthruyourdata-6019 Před 2 lety +1

    I swear, I don't know how I learned anything without You Tube. You have wonderful understandable explanations. The military training isn't as good. Thank You!

  • @tolkienfan1972
    @tolkienfan1972 Před 3 lety +4

    You know someone is good when many questions are answered with links to their other videos!

  • @The-KP
    @The-KP Před 5 lety +21

    One of the clearest explainations of motor and power facts I've seen yet. My college professor managed to unnecessarily overcomplicate this very same topic area, confusing a whole class! Only the strong survived, but Jeremy's style is very acquirable.

  • @willylo4090
    @willylo4090 Před 2 lety

    No question here.. just a big thank you. And praying you will bred more of the same minded people.

  • @MrMaikeul
    @MrMaikeul Před 7 měsíci

    Dude. If only CZcams was like this everywhere. Amazing video. Thank you for the time taken. :)

  • @CharlesCarabott
    @CharlesCarabott Před 5 lety +5

    Jeremy Fielding you are a one man electric motor engineering university. Thank you for sharing your knowledge

  • @snucc1000
    @snucc1000 Před 2 lety +11

    This presentation was flawless in so many ways, it doesn’t feel like CZcams. Thanks for sharing your immense knowledge man.

  • @algordon5843
    @algordon5843 Před 28 dny

    Just watched this video for a second time after seeing it a couple of years ago. It was just as entertaining a second time around but this time I was chasing information for an upcoming project and as I expected it had the stuff I wanted.
    Thanks.

  • @lucasdominichini3095
    @lucasdominichini3095 Před 8 měsíci

    Future engineer here, this video is as clear as it gets. Thank you sir.

  • @P_RO_
    @P_RO_ Před 5 lety +14

    An excellent presentation as always. Other guys have covered the differences but they are either too deeply technical or too shallow. You always strike the right balance and make the info understandable for the average tinkerer. One of the best YT channels ever!

  • @taterfpv
    @taterfpv Před 5 lety +69

    Just excellent. Its rare to find someone with such a complete understanding of a subject able to share it seemingly effortlessly. I don't know if you are a teacher in your paid profession but you sir have a gift. First visit. Subbed. Thank you.

  • @davidday866
    @davidday866 Před 2 lety

    This wins the internet today

  • @user-ev3dq5yi1q
    @user-ev3dq5yi1q Před 9 měsíci

    You clear but not over simplified presentation cleared up some confusion / questions I’ve had about motors. Thanks

  • @sheldonkirschbaum6213
    @sheldonkirschbaum6213 Před 5 lety +11

    Excellent practical professional teacher. Wish I had him teaching me 50 years ago.

  • @joerobinson4453
    @joerobinson4453 Před 5 lety +9

    A pleasure to listen to someone who understands their subject as well as this person.

  • @roha8993
    @roha8993 Před 2 lety

    Gotta love this guy, as if he's teaching his young children. Does presentation to make it so easy to understand. Gotta be a great parent.

  • @RandomShart
    @RandomShart Před rokem +1

    I love CZcams. Never get tired of accidentally stumbling across really great channels like this one! Subscribed, thanks!

  • @johnberumen1666
    @johnberumen1666 Před 2 lety +5

    Studying engineering right now and I’m very glad I found this channel, real life application conversations are the best! You’re doing gods work 🙏

  • @marlonlacert8133
    @marlonlacert8133 Před 4 lety +8

    Treadmill motors, should be the most unused motors around where I live.. lol Keep up the great work...

  • @notoriouselwood9253
    @notoriouselwood9253 Před rokem

    focused intent, Usable information, expert delivery, valid opinion posed from the "one of us" perspective. 10-10-10

  • @rishierish7720
    @rishierish7720 Před 9 měsíci

    Good stuff wish I had you as a teacher when I was younger.

  • @FL-gg4dq
    @FL-gg4dq Před 3 lety +27

    This was one of my biggest things confusing me when I started building stuff. Thanks for explaining !

  • @88cameras
    @88cameras Před 3 lety +4

    This is professional grade education material IMO..
    I often wonder if YT will ever try and find the best videos of every topic and start an actual university out of it?

  • @alitabattleangel9403
    @alitabattleangel9403 Před 2 lety

    Im not patient for long videos but that 19 mins felt like 2 minuites. Thank you for the lessons sifu

  • @theinsaneunknown
    @theinsaneunknown Před 2 lety

    This was the perfect amount of every ingredient.

  • @pacowang283
    @pacowang283 Před 5 lety +107

    That was an excellent video. Thank you for the education

  • @nathanbrungardt7885
    @nathanbrungardt7885 Před 4 lety +4

    Jeremy, you have no idea how happy I am to have found your channel, I recently was lucky enough to land an operator job in a power plant off the street where they are going to "train/school" me on the job, I was struggling with all the various motors that we use on different types of equipment and the way you teach and the knowledge you have is truly a blessing, thank you so much for your time in making videos and teaching others man, I greatly appreciate it!

  • @michaellocken2452
    @michaellocken2452 Před 2 lety

    Wish I could hit the like button more than once. This video deserves many moments of "Wow this is awesome!"

  • @ramgowda6834
    @ramgowda6834 Před 8 měsíci

    Awesome presentation by Mr. Fielding. No nonsense presentation. Mr. Fielding thanks for making this video. I’ll watch your other videos as well.

  • @iansutherland4902
    @iansutherland4902 Před 4 lety +3

    I did not pay enough attention in back in school and this video made up for that shortcoming. Thanks

  • @jimh6780
    @jimh6780 Před 5 lety +5

    Jeremy, welcome to the hall of heroes ... this is an awesome video.. I'm restoring a band saw right now, and i have plans that include a need for your tutorials... I'm glad I ran across your site.. intelligent, eloquent, 'smart' (shows in your demeanor and presentation) and a very likable guy... may you prosper greatly.

  • @garrettmcfarlane1901
    @garrettmcfarlane1901 Před rokem

    No frills, no gimmicks. Only pertinent, and accurate information. Excellent presentation. Keep it going, my friend.

  • @glenndrew7917
    @glenndrew7917 Před 3 lety

    Stumbled on this and watched it all the way through. Clear explananations. Will look at discarded appliances very differently from now on.

  • @rp4b449
    @rp4b449 Před 5 lety +13

    As a fellow engineer, much appreciated.
    Have a go at permanent magnet multi-phase motors.

  • @andrewbezzina87
    @andrewbezzina87 Před 5 lety +24

    I am so glad CZcams brought me here. This channel will become really useful when i start doing my DIY projects

  • @dtvm7469
    @dtvm7469 Před 2 lety

    Answered my question in first 5 minutes. Thank You, Jeremy.

  • @rikityrik
    @rikityrik Před rokem

    Your channel is by far one of the best I’ve seen lately. You better get ready for the competition, I’m gonna to start hoarding motors!! 😆✌️

  • @sanches2
    @sanches2 Před 5 lety +42

    That's a really neat overview, you are doing here!

  • @themonkeydrunken
    @themonkeydrunken Před 5 lety +32

    Always a treat to see a video from you, Jeremy. Thanks for posting all of this useful info!

  • @youpattube1
    @youpattube1 Před 3 lety

    Motors. A very big subject. I think you have done a good job of providing an overview of them.

  • @TheMoppersmurf
    @TheMoppersmurf Před 2 lety

    Interesting from start to finish and so easy to understand, even for a 62 yr old Dutchie:)
    Your vid's have value!

  • @harrison298
    @harrison298 Před 5 lety +77

    "You won't need quite as large of a shaft"
    Well that's a relief

    • @davidpayne4315
      @davidpayne4315 Před 4 lety +8

      That's not what my ex wife says

    • @jamesmichaelcabrera9613
      @jamesmichaelcabrera9613 Před 4 lety

      David Payne same

    • @ahikernamedgq
      @ahikernamedgq Před 3 lety +1

      Well, now I know why I can apply a ton of torque. . .

    • @maxk5065
      @maxk5065 Před 3 lety

      @@ahikernamedgq now i know witch part of the horse is 1 horse power (cause he whole beast is more than 1 horse power and it always bothered me)

  • @NorthernKitty
    @NorthernKitty Před 4 lety +4

    Just want to thank you for putting this video together - even though this is an "introductory" video, you cover a lot of ground that left me feeling like I have a solid overview of the types of motors that are out there and why I may wish to use one versus another. You organized the information thoughtfully and efficiently, and communicated it clearly and concise. Great job!

  • @alhajisesay2188
    @alhajisesay2188 Před 2 lety

    u made me a proud black man . god bless u . u know your stuff

  • @prodigalson2670
    @prodigalson2670 Před 3 lety

    What a refreshing thing for a man to just start a video supplying dense information, no fluff no beating around the bush. Great stuff dude.

  • @andrewwronski1763
    @andrewwronski1763 Před 3 lety +13

    @Jeremy Fielding You rock! I stumbled onto your channel and I love how you explain what something is and how the everyday person can do something with it and how they can get it! You have quickly become one of my top 5 channels to watch and get information from. You don't have filler fluff, your information is on point, your easy to understand, and you update your videos with the links you do in future videos!! Love the channel, Keep up the superb content!!!

  • @CubicSpline7713
    @CubicSpline7713 Před 5 lety +105

    Fantastic presentation and very interesting to me. Good man!

  • @christophermclaughlin8568

    Wish I could give this man more credit/advertisement because he is intelligent and very good at explaining

  • @arvinclassics
    @arvinclassics Před 3 lety

    This is what the internet should be, and seldom is! Thanks for sharing!!