How to Start Forging in Your Backyard | Beginners Blacksmithing and Bladesmithing
Vložit
- čas přidán 15. 07. 2024
- Thanks so much for 200 subscribers! Enjoy the shop tour at the end as a thank you!! Here's all the fancy links I promised:
----VIDEOS----
-Beginner Blacksmithing Tutorials: czcams.com/users/playlist?list...
--Mr. Volcano Setup/Review: • $80 Forge: Amazon Forg...
--How to Forge Rebar Tongs: • Forge Rebar Tongs and ...
--How to Forge Beginner Blacksmith Tools: • Forge Rebar Tongs and ...
----PRODUCTS----
--Cross Peen Hammer: www.harborfreight.com/3-lb-ha...
--Ball Peen Hammer: www.harborfreight.com/32-oz-b...
--1x30 Belt Sander: www.harborfreight.com/1-in-x-...
--1x30 Grinding Belts: www.combatabrasives.com/colle...
--Angle Grinder: www.harborfreight.com/power-t...
--Mr.Volcano Forge: mrvolcano.com/collections/the...
--Bernzomatic TS4000 Torch: www.walmart.com/ip/BernzOmati...
--Small 15lb Anvil: www.harborfreight.com/15-lb-r...
--Bigger 66lb Anvil: www.vevor.com/cast-steel-anvi...
As always, thanks for watching! It was fun to give some advice on garage shops and how to start blacksmithing. Let me know if you want to see any certain reviews on these tools, or be sure to ask me questions in the comments! If you enjoyed, please subscribe and like, it helps me out a lot! Happy Forging! - Jak na to + styl
Great video, just subbed
Thanks, I appreciate the support!
Same here, would love to get into blacksmithing
😂 I'm 62 years old and the very first video I watch, about something I've always wanted to learn, is done by a bright young man that is 17! Great video young man! Thank you for sharing and for the introduction. Wish me luck! I'll continue to watch and learn (I learn the way you do). 👍
"I know it looks like a mess, but it makes sense in my mind", every man ever on planet earth lmao. Great video man, I'm 21 and looking to start myself.
Haha too true! Good luck with it man it’s a good time 👊
Wish all the kids your age were learning such valuable skills. Keep it up!
Thanks!
I am a kid
I am 15 going on 16 already have done woodworking for a solid 5 years and want to move onto something else so blacksmithing looks pretty interesting
@spritercramberrydotnet4990 having a background in woodworking will be very helpful for blacksmithing since you already have a good understanding of tools, shops, and fabrication! Especially if you want to get into knife making/tool making, woodworking skills will be valuable.
I’m 12 been doing it for 2 years
I’m turning fourteen in less than a month and living on a farm, and I’ve noticed my dad has to order a lot of supplies and metal and such, so I’ve decided that I should start blacksmithing to help him out, and when I saw this vid, this was the confirmation that I needed to start. You have a list of supplies, your opinion and tips and multiple options, you even told us that we didn’t need that big of a place! Seeing someone else who started around my age (17-3=14), I know that I can do that. I’m for sure subscribing, and thank you.
Get on it lad! Starting young is a great idea!
Thank you! I'm 58 and just started forging. Mr Volcano!
Subscribed. If you can do that from the age of fourteen, I can make a start too. I'm only 61 so why the hell not?
This video is an inspiration.
Glad to hear it! At the end of the day it’s an awesome hobby and everyone who wants to should try it out!!
You’re awesome, dude! I’m 41, retired from the Army, and looking for new hobbies. This is the exact type of intro video I was looking for.
Subscribed, and keep up the good work!
Ha I'm in the same boat, head is melted since I left and really need a hobby to ground myself and blacksmithing seems to tick the boxes
@@joeofnotrades Awesome, dude. Thanks for your service!
Very informative and to the point. Well done!
Glad to hear it!
Dude I love your videos! Awesome job! I’ve been wanting to get into blacksmithing, but I get so caught up in having all the “right tools” before I do something. You are showing that all you need is ambition and a couple of basic tools to get into this thing!
And you are doing it in a freakin lifetime plastic shed… UNBELIEVABLE
all you really need to get started is something to heat metal, something to hold it, something to pound on and hit with and just go do it. I started with a piece of rail road rail, long handle pliers from Harbor Freight and a bucket forge made out of a metal bucket and plaster of Paris and a home made burner. You can get started and get better stuff as you learn.
I appreciate the kind words! And like Jim said, a basic forge isn’t too hard to make to get started!! Be safe, adapt, and make it happen! I hope you get to explore this awesome art!
Bro, I'm 17, wanting to get into Blacksmith and Weapon Making. I love this video! Thank you!
Anytime man! Can’t wait to see what you make!
Subscribed, young man. You're cooler than a lot of "pro's".
Getting my own place soon and definitely wanna get into smithing. Doesn’t have a garage but it has a decent sized shed. Once I’m all settled im definitely gonna look into building a shop in there
You have been so informative. Thanks so much for sharing!
This is gonna help out a lot. Great video.
Bonus segment : filming setup 😂😂( you’re genuine)
Great job!
Comprehensive and mature approach to the info youre preventing thank you 👍
life saver. It's always been a dream of mine to learn blacksmithing/bladesmithing. this is the perfect introduction video. thank you so much. Subscribed.
Thank you Todd. I am impressed. I am 52 right now, thinking about getting into this.
Go for it man! It’s so much fun and a great thing to learn!
Thanks Todd, its good to be reminded that keeping it simple and getting it done is what is important; otherwise you’re just a tool collector! Keep up the great work 👍
What a great video. Thank you.
GG Todd that's awesome wish all the other kids were that cool
Keep them comin young man!
Thank you so much, I really needed this! I really wanted to start blacksmithing but I had no idea what to do. Thanks so much for the information.
Good video young man!
I appreciate it!!
Love the energy...2 of my boys forge with me..8x12..anthracite coal forge.
Actually really concise, clear and most importantly has the good energy!
Might try and set something up 👀
This guy rocks
Sick video man!!
Yo thanks dude I use a firebrick forge works pretty good thanks for the tutorials
Awesome video. I have subscribed and begun watching your other videos. I am very interested in getting into it and your videos are the final push for it.
Go for it man! Just keep learning and you’ll see some great things! This is a bit of a late response I know, but I hope you’ve been able to try some things out!
great tips, thanks! 🙂 Just subbed!
thanks for this. I'm a veteran trying to fill my time with more hand on trades. I appreciate this a lot, keep it up brother.
For sure! Glad to hear that this helped I and I wish you best of luck with everything!
Dude you are an inspiration! Best most to the point easiest digestible video on the topic I've been able to find and your a quarter of the age of the rest of these forgers. Keep it up dude
I appreciate the feedback! I just wanted to make something that people could understand lol
Very nice job explaining and information about it. Thanks so much. Keep up the great craftsmanship and hard work my friend. Forge On. God bless.
It’s my pleasure! Thanks for all your support!
Just found your channel. Love it. Great job.
Thanks!
Awesome video.
Thanks!
Really good and encouraging video! I've been thinking of starting making knives and stuff as a hobby, thanks man!
Glad to hear it helped out! Hope you can get started!
Solid video dude, thanks for the info
Anytime!
Couple ideas for your shop, don't get rid of your water quench... add a bucket with oil, doesn't have to be fresh oil, I've seen blacksmiths use old engine oil for quench! Heck I've even done it! 2, if you know of a local Blacksmith close to you... go talk to him, he may just take you in to learn the trade,! Alot of blacksmiths are just proud you are interested and would be happy to teach you! Keep smithing!
Impressive.
This is awesome im thinking about getting into this
Go for it man! I’ll never regret time spent in the shop, it’s such a good outlet!
Good Man!
Great video man, earned a sub
I appreciate it!
Great tips!🙂 I just subbbed!!
Well done bud, very good video, hoping to kick off my blacksmithing/youtuber career myself soon, definitely subscribing to you
I’m excited to see what you do!
Good job tablin
Thanks tablin
@@ToddKoch huh?
Idk
Thanks tablin
Dopeness
its the noise for me that's the problem I have! only reason i havnt started yet because ppl would go crazy at me lol
I live in Indiana and iIndianapolis and i am a Mosaic Artist and i would love to learn blacksmith
Awesome thank for the tips brother
Yeah for sure! I’m glad it could help!
@@ToddKoch I'm studying, learning, and watching everything. I want to give it a shot be it will be a slow process until I get everything and started to forge
That’s the most important thing! Keeping that interest is essential and learning all you can is the best thing you can do! That’s what’s helped me a ton!
Terrific video, very informative. Trying to work on reducing camera shake would be my only feedback, looking forward to checking out your other videos
My new plan A
Good luck haha!
210 Subscribers... congratulations man!!!
Did you upgrade from your 20psi regulator to a higher one?
Thanks! I haven’t upgraded my regulator yet but it’s definitely on my radar.
Yeah sick as! You're doing awesome but one day you'll still look back and say 'man I didn't know s":7. Me.... I was pumping petrol in the middle of nowhere after year 10.
True, learning takes time and I’m ready to learn lessons 😂
I loved your video! One question, is there a decent way to add handle scales without a drill press? They seem so pricey but it feels like a required tool. Thoughts?
Hey man, sorry for the late response! I’ve done a number of handle scales without a drill press, and they’ve turned out fine. Using a hand drill and good measuring methods can yield great results! However, using a drill press does make it way easier to be accurate. But we all gotta start somewhere!
I'm a welder getting into blacksmithing so I want to warn yall as a welder where safty glasses any hot metal makes flaks and they suck when they get in your eye
Yup saftey gear is a must!
Hello! I am a recent sub and am getting into blacksmithing and I love the videos. I was wondering where you get the metal from?
I started with (and still use) rebar to learn how to forge. Scrap metal is a good option because then you're not losing money on practicing. I find most my rebar in construction sites, I just ask the workers if they're okay with me a taking scrap and normally they don't care. When it comes to buying actual metal, I like onlinemetals.com because they have a lot of varieties in metal type and thickness and are just a good streamline service overall. Metal really isn't expensive for the quantity you get per order, and you can even buy rebar for real cheap at home depot or most other hardware stores.
I enjoy your video's. I am glad to see someone who I consider a "youngster" interested in this, I'm in my 60's and have been smithing for a while now. Keep up the good work and I think I noticed a spoke shave hanging on the wall? Care to show us how you made it?
Thanks, I am really glad I started so early and it’s great to know that people enjoy the videos! Not quite sure which tool you’re talking about, probably my drawknife? If so, I did make a video on that, I just posted it on a channel I used to do with my friend, here’s the video link: czcams.com/video/cJ__XHdOT-A/video.html
@@ToddKoch You are correct, it is called a draw knife. I have just always called them "spoke shaves" since they were used many years ago to shape the spokes on wagon wheels, not that I am that old. Thanks for the link, I will check it out.
I figure it was something along those lines, I just hadn’t heard someone call it that before! That’s cool though, I never knew that’s what they used to be used for. I just use it to shape up tool handles normally.
@@ToddKoch Haven't seen you post anything in a while. Is all good with you?
All is well with me, thanks for checking! I just started up my senior year of high school and I am a student body officer so I have been a bit busy lately. I do have a few videos I’m working on though, I’m hoping to get a video out sooner then later!
Can't I get an ol' fashioned sharpening stone? Like those where you use your foot to make it spin
My only criticism is that you need to work on putting out mor content more offten. Even if it's only once a month. Love your work keep it up!!!
Congrats Todd. Great to see someone so passionate at your age when most are playing the Tik toks lol
Great video! Where can I find the hand sanding stick you have?
I just used an old piece of wood that I had laying around! It’s about 1/4 inch thick, and 6-7 inches long
I live in an apartment and as such its hard to get a big burly anvil and start hammering.i also checked for internships but they are very few in number and the internships are frowned upon in KSA and im an expat.any suggestions?
Keep on beatin Todd!
Thanks!!
So, how do you overcome the fear that other's in the neighborhood might get annoyed with the banging? :)
Is there a certain video you would recommend for the coffee can forge?
Most any of the top ones should work well. I know this is a late response, my bad! I’m also thinking about making a tutorial on a coffe can forge sometime.
i only have one question i have no idea what to put my anvil on that’s sturdy it’s 88lbs. i live in a place where i don’t have access to a tree stump just need an idea thanks
Sorry I know this is way late but I built my stand out of 2x4s! You can also weld together stands if you have the means. But you commented this almost a year ago so probably figured it out haha!
Where do i get the metal from, a problem im having rn
I like to get my metal from construction sites and stuff like that… just be sure to ask the workers first, in my area they’ve been fine with me taking scrap rebar. You can also order online, I like to use onlinemetals.com, and they have good alloys and knife making steel. If you are just looking for metal to practice with though, I’ve found decent steel rods/rebar at Home Depot and similar places! Just remember to check if it’s mild steel or not- mild steel can’t be hardened so you can’t use it for tools or knives.
👍👍👍👍🇵🇭
🙏🙏
can you put were you get your 1by30 belts
For sure, it's now in the video description under the link for the 1x30 grinder. Here's the link for convenience sake too: www.combatabrasives.com/collections/belts/1-x-30
thanks bro
Yep, anytime!
seems like this is impossible for me because i live in a apartment building
Do you sell knives I collect them
I’ve sold a few every once in a while! It’s hard for me to consistently sell/make them though while I’m at college
Ｐｒⓞм𝕠𝕤𝐌 😍
Ok
To get better at any trade is to learn from experienced people in the trade. Not kids making content with very little experience.
Great idea! Get out and do that instead of wasting your time here buddy!
I learn more of the kid mate
A 17 year old forging in his backyard? I've seen stranger things...
lol this is the internet, I’m definitely not the weirdest one out there!!
I noticed that at around 1:15 you said “Or if you’re a miner and get to mooch off your parents like I do” but I thought this video was supposed to be about blacksmithing and not mining?
We’ll you have to mine to get the metal
Im 40, been collecting knives for years and now wanting to get into making my own. That said.. Can’t wait for the day I tell people I learned from a 17 yr old kid off CZcams! 🫡💯
Good luck, man!
Haha this is such a great compliment!! Keep it up and hope you can get going soon!!
Great video, just subbed
I appreciate the support!
@@ToddKoch you deserve it, I stumbled across you after doing a search for cheap blacksmith set up and I was watching on TV so not signed it but I was so impressed I got my phone out and subbed, well done and keep up the good work.