I have a shed with a metal roof.. it's got black schmutz stuff, like maybe mold or just 'ick' on one side (where more leaves fall on it). Roofing guy said he wouldn't clean it. He said it's not 'worth it' and might harm the roof. This was a guy who could have squirted whatever up there, ran a hose over it from the ground a few minutes later and collected $$$s. So I trust guys saying NO to easy money even more. F that Karen.
Here in AU, we have a large portion of metal roofs, we don't have most of the types of roof you have in the US, it's either concrete tiles, ( very ocaqsionally teracotta tiles) or various forms of metal roof. . THE difference in the mindset and something you should understand is, metal roofs are not porous, there is little or no advantage to using any sort or bleach or detergent. . Metal roofs within reason will tolerate being heavily pressure cleaned. Yeh, some of the things that grow on metal roofs will eat thru some of the paints and electroplating systems used, even more reason to keep the roof clean. Bird$#!T and Bat $#!T can be a real problem, especially in areas with fruit trees, it can be very corrosive. . The other thing here in AU, we work in a harness, "in rerstraint" on all but some flat roofs. Legally we should not be on a roof unrestrained. But you must first rig the restraint lines. .yes we sometimes use planks and ladders, there are hook ladders and ridge attachments in common use here Where access permits, some guys will use cherry pickers ..... they are pretty common here. For the most part a clean metal roof is less slippery than a dirty one. . some of the metal roof products can be very slippery when new, some colours are worse than others, pale pink and sky blue are in my opinion the worst. but chances are you won't be washing new metal roofing. . Frequent roof washing just isn't a thing here, if at all it would be done every 3 to 5 years. . roof painting is more of a thing, it's to do with the strong sun. Some of the roof paints are very robust and seem not to allow mould or anything to stick to them
Just did my first metal roof a week ago. It was a huge house with lots of roof angles. It was a ton of work. It was mostly done from ladders as very little of it could be done from the ground. The biggest problem was when I was spraying on one side of the house and the chem would go over one of the angles to another part of the roof with the wind. Would have to make sure I got water on that other side so it did not sit there, get hot, and mess the roof up. It turned out great, but not sure if I will do another one that big again....at least anytime soon.
Love metal roofs. So easy to do especially where I’m at. We advertise for shingle roofs but get 90% of calls for metal roofs. We downstream them and rinse same as house wash. Works like a charm we love them!
The most frustrating thing I have discovered about cleaning metal roofs is that the last two or three inches towards the very bottom of the roof always seems to be way too stubborn to come off the first time or sometimes even the second or third. I end up having to use a little bit of pressure with a shooter tip, or something along those lines. And that adds a lot of time and frustration to the job.
Had no idea that this was a thing with metal roofs. I'm a year away from replacing my roof. And was sold on the idea of going metal. ... After watching this. I'm definitely going to go a different route. *Thank you so much for making this video. Would have cost me, in more than one way. If I went with metal. And hadn't come across your video. **Much respect.
Our roofing company has shared that we should NEVER pressure wash an asphalt roof. They recommend sprinkling Costco Kirkland laundry detergent and using a hose and garage broom, if needed…
@@funnycatvideos5490 I wonder why the shingle manufacturing company put in their warranty that they recommend to wash it every 3-5 years and gives you a process to wash the roof that almost all companies follow. Crazy right
Here is what i took from this video. To stay the hell away from every mettle roof. For now anyway. It is extremely rare when i have a complaint. No matter how little the complaint is i lose sleep and it's on my mind for weeks. I couldn't imagine destroying someones roof, I'd be sick forever.
My roof is newer. It still has a shinny surface. I direct roof water into my pool. We go thru a drought every spring. Can’t you use regular water without pressure washing? And then use a car wax with a UB inhibitor. I was hoping to find tools to do this like sticks or mop type things to wash and apply. I have a flat roof next to the pitched roof
Just did a metal roof today. It was a small outbuilding a guy used as an office. I said sure, for an extra $75! It was a little bit of a pain as the roof was pretty nasty and the siding was hardy board which i hate, but nothing 12.5 can't handle!!😊 I wish i would have watched this before because i mixed it a little hot and it took two times! But i definitely rinsed like crazy. I also do metel carports but they are a pain as you really have to use a hot mix and lots of pressure when thier really bad with algae!
We clean over 100 metal roofs per year. We pick and choose which ones we want to do a lot of it has to do with safety and how long it’s been since the last time clean if it’s a restoration work , we will pass and stack composition easy roofs on the calendar. Here is Seattle 80 percent are composition
You're so funny, bro! 😂 You open with the whole disclosure of why you don't like doing metal roofs, drop the F bomb on Karen, and then jump right into promoting your product! Legendary!!!😂😂😂
We have lots of lichen in our area and in my experience doing them you can eliminate the organics but it’s very hard to remove the lichen without pressure. And if you do remove it, normally you’re left with patchy marks cause lichen will remove paint/primer on metal roofs
Hey Mike thank you so much, you’re a magician because yesterday I started my first metal soft wash roof and this video helped a lot about it, and yeah the most easy way it’s apply the chemical, brush and RINSE A LOT GUYS because it’s so difficult to remove the mix on it. Don’t let it dry ✌🏼
Here in south africa people dont respect time and safety if you offer them a service and will not pay you the days work if you deny to take risk for their pleasure .This is difficult when starting a softwash company and offering the service people didnt know they needed.they just paint everything if it gets dirty
I was told by someone who has worked with metal & paint for 30 years. He explained the science behind cleaning metal/paint. Would love to share and know your thoughts. So if someone is needing to wash roof, they can begin process by using a really week bleach mix. Wash corrugated roof with your low bleach, while making sure it is not left on long follow it with a good wash as bleach is carosive. Then you must neutralize the pH with a super weak vinegar solution wash abd that to is carosive. Be mindful that the vinegar solution must be worked/brushed into the metal well then soon as, rinse it off well.
there is literally not a better youtuber at all than you, Mike. The fact that you tell it how it is and have no filter, I love it. haha. I recently started my own roof soft wash exclusive business, after 12 years of being a roofer, and this is inspirational material mate haha
I would want to protect the roof from fading and rust. I just looked at a house with a metal roof from ‘99. Faded and rust holes! It’s like not waxing your car. at least find someone who is willing to do it. I don’t mind doing mine.
@@feesor something happened to it. They all will dade but rust, not from 99. Maybe had some damaged screws at this point that need replaced. Or maybe bad hail damage, should be rusty panels though.
Man, that’s awesome. We’ve discussed before, but I’m a kitchen hood/fan cleaning business and I’d LOVE to watch your training materials. You simply can’t know enough about what you do…end of story.
Oh wow! I had a potential customer get mad at me, because I refused a job. Was high up gutter cleaning on a metal roof. We would have to get on the roof. She texted me, telling me to “just do it today for 40 bucks, will take 15 minutes”. Completely ignored her and went about my day. Got an angry couple of paragraphs next day regarding me not communicating. I replied “have a nice day” and also earned my first bad review!
What kind of motor or pump are you using? How many feet of flexzilla and what type is that? Titan hose reel, but how many feet? and is it dedicated for bleach?
Hey Mike, that was an excellent video! I just put pricing on two very large commercial metal roofs. Your information help me decide to take my fall protection to the next level, and I appreciate that! By the way, quote IQ is working great for me aside from a couple quirks that are probably my fault. Did you get a chance, please guide me on where to get technical advice for the app. Thank you Sir! I always enjoy watching your videos and you have educated me in a number of ways
Not a professional! I went on my friend’s metal roof and when I tell you I moved this () much and the next thing I knew. I was on the concrete porch. The metal gets SUPER SUPER slick with just a little water.
You don't need to say fuck you on video, we're already saying that in our head to her, but yea damn does it suck to get a low rating that is literally undeserved and I'd argue not appropriate for this situation either.
The smartest thing you can do as a business owner is put safety above making money. I ask myself on dangerous jobs is this few hundred dollar job worth me not working the rest of the year or worse.
@@AllAboutPressureWashing When the cleaning solution comes in contact with plants near the house, when it runs off roof (where there are no gutters), or gets an accidental burst from the sprayer - does it damage the plants?
I amybe in the minority here but sorry guys but as a contractor it is a rule and not good for business to bash customers openly. We all have had bad customers but your next potential customer just saw this and you just showed you low EQ on your part. Just move one and talk about them with you friend over a drink. No need to openly express it.
You can never please a ‘KAREN’. Don’t worry about them or their stupid opinions, guaranteed the people who Karen bashed you to more than likely realize that person is a Karen in every part of their life. Good on you for not putting your employees in danger just because some nasty Karen can’t get over her selfishness. Good video.
@MIKEV - All About Pressure Washing well I would like your advice on how to do things plus I had tell me that I needed a hot water pressure washer to clean concrete and wondered if was true. I wasn't meaning to be rude if I was
@Antonio well when we goes live I'm still working. He's an hour ahead of me. I like to join the live if I can. I do pressure washing on the side. My main job is roofing and building polebarns
@@ricbenner7355 From my little experience, I’m washing big rigs trucks and trailers just using cold water. I started with a hot water washer I bought from an auction, it took a shit on me, through trial and error I’m now having spectacular results using the correct chemicals at the right ratios, just using cold water and making it work. I’ve learned you don’t need a hot water washer but it would help I assume same would apply in your scenario.
🔥𝗤𝘂𝗼𝘁𝗲𝗜𝗤 Send estimates, Collect Payments, Keep Track Of Customers (FREE) 👇🏻
🍏 App Store: apps.apple.com/us/app/quoteiq/id1635217093
▶️Play Store: play.google.com/store/apps/details?id=corp.quoteiq.app
💧𝗛𝗼𝘄 𝗧𝗼 𝗪𝗮𝘀𝗵 - 𝗧𝗵𝗲 𝗖𝗼𝗺𝗽𝗹𝗲𝘁𝗲 𝗚𝘂𝗶𝗱𝗲 : bit.ly/HowToWash101
I realy appreciate the fact that your unapologetic about putting unruly customers in their place 👍
👊🏻
I have a shed with a metal roof.. it's got black schmutz stuff, like maybe mold or just 'ick' on one side (where more leaves fall on it).
Roofing guy said he wouldn't clean it. He said it's not 'worth it' and might harm the roof. This was a guy who could have squirted whatever up there, ran a hose over it from the ground a few minutes later and collected $$$s.
So I trust guys saying NO to easy money even more. F that Karen.
Here in AU, we have a large portion of metal roofs, we don't have most of the types of roof you have in the US, it's either concrete tiles, ( very ocaqsionally teracotta tiles) or various forms of metal roof.
.
THE difference in the mindset and something you should understand is, metal roofs are not porous, there is little or no advantage to using any sort or bleach or detergent.
.
Metal roofs within reason will tolerate being heavily pressure cleaned.
Yeh, some of the things that grow on metal roofs will eat thru some of the paints and electroplating systems used, even more reason to keep the roof clean.
Bird$#!T and Bat $#!T can be a real problem, especially in areas with fruit trees, it can be very corrosive.
.
The other thing here in AU, we work in a harness, "in rerstraint" on all but some flat roofs. Legally we should not be on a roof unrestrained.
But you must first rig the restraint lines.
.yes we sometimes use planks and ladders, there are hook ladders and ridge attachments in common use here
Where access permits, some guys will use cherry pickers ..... they are pretty common here.
For the most part a clean metal roof is less slippery than a dirty one.
.
some of the metal roof products can be very slippery when new, some colours are worse than others, pale pink and sky blue are in my opinion the worst.
but chances are you won't be washing new metal roofing.
.
Frequent roof washing just isn't a thing here, if at all it would be done every 3 to 5 years.
.
roof painting is more of a thing, it's to do with the strong sun.
Some of the roof paints are very robust and seem not to allow mould or anything to stick to them
👊🏻
Just did my first metal roof a week ago. It was a huge house with lots of roof angles. It was a ton of work. It was mostly done from ladders as very little of it could be done from the ground. The biggest problem was when I was spraying on one side of the house and the chem would go over one of the angles to another part of the roof with the wind. Would have to make sure I got water on that other side so it did not sit there, get hot, and mess the roof up. It turned out great, but not sure if I will do another one that big again....at least anytime soon.
Naw
That watch store is by my house
You can rent a lift and do the roof safely without setting foot on the roof or a ladder.
Yeah this guy is a hack never heard of people wanting to clean the roof without getting on the roof. Shingle should never be washed anyway
If it's not on a 2/12 or 3/12 and a straight gable I'm not doing it!
Just use a simpole kevlar carbon fiber pole from the ground with a 40degree 20gallon tip strategically angled near a soft bristle brush
Great tip!
Love metal roofs. So easy to do especially where I’m at. We advertise for shingle roofs but get 90% of calls for metal roofs. We downstream them and rinse same as house wash. Works like a charm we love them!
A that's like printing money
Tripod sprinklers work great while you're on the roof to keep the plants watered
Yep
The most frustrating thing I have discovered about cleaning metal roofs is that the last two or three inches towards the very bottom of the roof always seems to be way too stubborn to come off the first time or sometimes even the second or third. I end up having to use a little bit of pressure with a shooter tip, or something along those lines. And that adds a lot of time and frustration to the job.
Exactly
Had no idea that this was a thing with metal roofs. I'm a year away from replacing my roof. And was sold on the idea of going metal. ... After watching this. I'm definitely going to go a different route. *Thank you so much for making this video. Would have cost me, in more than one way. If I went with metal. And hadn't come across your video. **Much respect.
Our roofing company has shared that we should NEVER pressure wash an asphalt roof. They recommend sprinkling Costco Kirkland laundry detergent and using a hose and garage broom, if needed…
Yeah I cringe every time I see somebody using chemicals on the shingle roof! They were never meant to be washed only replaced.
@@funnycatvideos5490 I wonder why the shingle manufacturing company put in their warranty that they recommend to wash it every 3-5 years and gives you a process to wash the roof that almost all companies follow. Crazy right
@@creeksidepressurewashing1443right… 🙄
Mike gives ZERO Fvck$.......Solid information. I appreciate the candor.
👊🏻
i think reviews from people who are not customers should be removed. most places won't allow you to review unless you purchased something.
Ok
Wear that one star like a badge of honor my friend. Good on you!
Here is what i took from this video. To stay the hell away from every mettle roof. For now anyway. It is extremely rare when i have a complaint. No matter how little the complaint is i lose sleep and it's on my mind for weeks. I couldn't imagine destroying someones roof, I'd be sick forever.
My roof is newer. It still has a shinny surface. I direct roof water into my pool. We go thru a drought every spring. Can’t you use regular water without pressure washing? And then use a car wax with a UB inhibitor. I was hoping to find tools to do this like sticks or mop type things to wash and apply. I have a flat roof next to the pitched roof
Just did a metal roof today. It was a small outbuilding a guy used as an office. I said sure, for an extra $75! It was a little bit of a pain as the roof was pretty nasty and the siding was hardy board which i hate, but nothing 12.5 can't handle!!😊 I wish i would have watched this before because i mixed it a little hot and it took two times! But i definitely rinsed like crazy. I also do metel carports but they are a pain as you really have to use a hot mix and lots of pressure when thier really bad with algae!
We clean over 100 metal roofs per year. We pick and choose which ones we want to do a lot of it has to do with safety and how long it’s been since the last time clean if it’s a restoration work , we will pass and stack composition easy roofs on the calendar. Here is Seattle 80 percent are composition
My number one priority is my own safety and the safety of my crew. Customer satisfaction always comes second
you won’t be in long, they can both be first fyi
You're so funny, bro! 😂 You open with the whole disclosure of why you don't like doing metal roofs, drop the F bomb on Karen, and then jump right into promoting your product! Legendary!!!😂😂😂
🤷🏻
We have lots of lichen in our area and in my experience doing them you can eliminate the organics but it’s very hard to remove the lichen without pressure. And if you do remove it, normally you’re left with patchy marks cause lichen will remove paint/primer on metal roofs
And customers are typically not thrilled with the after results. Much prefer asphalt and tile
Hey Mike thank you so much, you’re a magician because yesterday I started my first metal soft wash roof and this video helped a lot about it, and yeah the most easy way it’s apply the chemical, brush and RINSE A LOT GUYS because it’s so difficult to remove the mix on it. Don’t let it dry ✌🏼
👊🏻👊🏻👊🏻
2:00 mark =. Well said 👍👍
I just blow off debris with a leaf blower...rain does the washing part. 😊
No
Send her a gift basket. That would be the ultimate mind F!
Here in south africa people dont respect time and safety if you offer them a service and will not pay you the days work if you deny to take risk for their pleasure .This is difficult when starting a softwash company and offering the service people didnt know they needed.they just paint everything if it gets dirty
Unpainted wood aswell
I was told by someone who has worked with metal & paint for 30 years. He explained the science behind cleaning metal/paint.
Would love to share and know your thoughts. So if someone is needing to wash roof, they can begin process by using a really week bleach mix.
Wash corrugated roof with your low bleach, while making sure it is not left on long follow it with a good wash as bleach is carosive.
Then you must neutralize the pH with a super weak vinegar solution wash abd that to is carosive.
Be mindful that the vinegar solution must be worked/brushed into the metal well then soon as, rinse it off well.
Yes, this is the correct way to clean any type of roof. But grab a bleach neutralizer instead if vinegar
@@AllAboutPressureWashing Thank you, legend!
In theory couldn’t I rinse roof with plant protect after using sh to aid in better rinsing , Or would that be a waste of chems?
there is literally not a better youtuber at all than you, Mike. The fact that you tell it how it is and have no filter, I love it. haha. I recently started my own roof soft wash exclusive business, after 12 years of being a roofer, and this is inspirational material mate haha
Mike don't fuck around w no Karens..
100% agree.
I’ve done hundreds and hundreds of metal roofs but I still don’t enjoy them.
👊🏻
I wouldn't wash my roof period!!! No one including me is going anywhere near my roof with a pressure washer or chemicals!
Be smart
I would want to protect the roof from fading and rust. I just looked at a house with a metal roof from ‘99. Faded and rust holes! It’s like not waxing your car. at least find someone who is willing to do it. I don’t mind doing mine.
@@feesor something happened to it. They all will dade but rust, not from 99. Maybe had some damaged screws at this point that need replaced. Or maybe bad hail damage, should be rusty panels though.
Man, that’s awesome. We’ve discussed before, but I’m a kitchen hood/fan cleaning business and I’d LOVE to watch your training materials. You simply can’t know enough about what you do…end of story.
What if you rented a Lift t to do the more challenging roof cleaning jobs, and the client was able to cover the costs. Would you still do it?
Probably not - way easier jobs that are just as profitable and the logistics involved aren't worth it. But that's just me.
What about flat roofing like roll roofing and TPO, how do you go about cleaning the do and don't for it
Next video maybe ?!?
Treat it like a shingle roof
Excellent video ! With this video you answer all my questions. Gracias 😊
Great. Now I have to rethink this metal roof idea for my house. Thanks Mike. I had no idea.
Just one man's opinion!!
Thanks for the Vid I have a cleaning that has a metal roof above the front porch and garage and I was worried how the SH would react to it.
Glad I could help
His unapologetic way of standing up for his guys is admirable!
Oh wow! I had a potential customer get mad at me, because I refused a job. Was high up gutter cleaning on a metal roof. We would have to get on the roof. She texted me, telling me to “just do it today for 40 bucks, will take 15 minutes”. Completely ignored her and went about my day. Got an angry couple of paragraphs next day regarding me not communicating. I replied “have a nice day” and also earned my first bad review!
Hey Mike I some questions for you. I'd love to talk to about my pressure washing business but I have a way to PM you
Oh- I don't do that. Join the Inner Circle
👊🏻
So much good info here. Thank you
Thanks
Cheers Mike. Priceless knowledge
👊🏻
Pollen on metal roofs is also a pain to clean off
Caked on after weeks of the morning dew then sun beating down cycle is the worst!
What kind of motor or pump are you using? How many feet of flexzilla and what type is that? Titan hose reel, but how many feet? and is it dedicated for bleach?
It's a Kraken from southeast sofrwash
It's a reel deal hose reel - not Titan- also from SESW- maybe 200' no idea - it's for the Softwash pump
Have you ever seen the metal shingles? They look like regular asphalt shingles but they’re metal
I've not seen them but now I have to Google it!
@@AllAboutPressureWashing yeah gonna have to start watching out for those haha
Hey Mike, that was an excellent video! I just put pricing on two very large commercial metal roofs. Your information help me decide to take my fall protection to the next level, and I appreciate that! By the way, quote IQ is working great for me aside from a couple quirks that are probably my fault. Did you get a chance, please guide me on where to get technical advice for the app. Thank you Sir! I always enjoy watching your videos and you have educated me in a number of ways
I've been doing yhis for 25 years and never heard of a ECP when did someone come up with this
I bet that you haven't heard of a lot of things
Noted don't say that, but I bet it felt really good too.
Haha
Super time consuming! Did a 3100 sqft metal roof
Not a professional! I went on my friend’s metal roof and when I tell you I moved this () much and the next thing I knew. I was on the concrete porch. The metal gets SUPER SUPER slick with just a little water.
He seems to be spraying near an power line.
And?
Tell that Karen! I got 1 1 ⭐️ review on Google from someone I’ve never met or talked to… so I know how ya feel.
That sucks
@@AllAboutPressureWashing ya it does. Looks like a bot account in Hawaii but Google doesn’t care. It’s sad how much some people just suck
You don't need to say fuck you on video, we're already saying that in our head to her, but yea damn does it suck to get a low rating that is literally undeserved and I'd argue not appropriate for this situation either.
The smartest thing you can do as a business owner is put safety above making money. I ask myself on dangerous jobs is this few hundred dollar job worth me not working the rest of the year or worse.
Does the SH affect the vegetation that you're also spraying?
Explain
@@AllAboutPressureWashing When the cleaning solution comes in contact with plants near the house, when it runs off roof (where there are no gutters), or gets an accidental burst from the sprayer - does it damage
the plants?
Tell the homeowner to stuff it ! It's your damn company !
What if you applied gutter butter to it?🤔 as the brightner and just rinse off no SH well unless theres algae or mold
Love it!! Stay real dude.
What's a good cleaner to use to clean the dead fadded color off a garage door?
A degreaser I guess
good content
Savage!!!!! Love it!
If you put a ladder on a mettle roof you cand drag it you will scratch it then karen be more mad
i'm here because i got up on a metal roof to clean it.
Hey Mike is there a coupon to enter for the “ How to Wash Guide”
50Free
I amybe in the minority here but sorry guys but as a contractor it is a rule and not good for business to bash customers openly. We all have had bad customers but your next potential customer just saw this and you just showed you low EQ on your part. Just move one and talk about them with you friend over a drink. No need to openly express it.
Hello genius - ask yourself what my business is before you start yapping 🤣
Can you be successful in the pressure washing business if you don’t offer roof cleaning as a service?
I’d rather get a “no” then a half assed job to send an encyclopedia list of F U’s. She should be grateful you didn’t waste her time or money.
You should have quoted karen 25k
👊🏻
Whats the gpm of the softwash your guy is using?
5.5
This is why I have not washed my metal roof.
90% of my roofs are metal
Shoul've just asked Karen an absurd amount of money to do it...
You can never please a ‘KAREN’. Don’t worry about them or their stupid opinions, guaranteed the people who Karen bashed you to more than likely realize that person is a Karen in every part of their life. Good on you for not putting your employees in danger just because some nasty Karen can’t get over her selfishness. Good video.
Great content thanks.
I meant i dont have a way to pm you
Sometimes he does live streams on CZcams, subscribe and set your notifications on. He answers a lot of questions on there
Why are you trying to message me
@MIKEV - All About Pressure Washing well I would like your advice on how to do things plus I had tell me that I needed a hot water pressure washer to clean concrete and wondered if was true. I wasn't meaning to be rude if I was
@Antonio well when we goes live I'm still working. He's an hour ahead of me. I like to join the live if I can. I do pressure washing on the side. My main job is roofing and building polebarns
@@ricbenner7355 From my little experience, I’m washing big rigs trucks and trailers just using cold water. I started with a hot water washer I bought from an auction, it took a shit on me, through trial and error I’m now having spectacular results using the correct chemicals at the right ratios, just using cold water and making it work. I’ve learned you don’t need a hot water washer but it would help I assume same would apply in your scenario.
love the channel gonna start pressure washing soon so your tips are cool
👊🏻
loved it!
😂😂 love this
👊🏻
Totally replying with "thank you for your feedback" from now on. :)
FDB
Rent a lift lol
Nah
❤
👍👍👍👍❤️❤️❤️❤️❤️❤️❤️
Just because you don't know how to properly clean a metal roof, doesn't mean that it can't be done 😉
Huh? Did you watch the video? I know how clean a metal roof- I choose not to have my guys do some metal roofs. Watch before commenting.
Only way your getting that bleach off metal is one restore
Nope
@@AllAboutPressureWashing I'm talking like bleach that's already dried up