Video není dostupné.
Omlouváme se.
2014 Yamaha Drive, Gas - Quit Running While Driving
Komentáře • 40
Další v pořadí
Automatické přehrávání
1999 Yamaha G16, Gas - No Crank, Bad Stop SwitchKevin's Golf Carts
zhlédnutí 60K
1995 Yamaha G14, Gas - There's a flat spot when it startsKevin's Golf Carts
zhlédnutí 5K
2012 EZGO TXT, Gas - "It wouldn't start after I parked it!"Kevin's Golf Carts
zhlédnutí 1,3K
Joker can't swim!#joker #shortsUntitled Joker
zhlédnutí 38M
This is the Biggest SAW in the World 😱🪚 #camping #survival #bushcraft #outdoors #lifehackMarusya Outdoors
zhlédnutí 19M
Girl’s compassion turns foul dog into cute furry friend #shortsI migliori trucchetti di Fabiosa
zhlédnutí 8M
Vybíráme outfit na koncert😅 Berete 💛 nebo 🩷? #justforfunLollipopz
zhlédnutí 140K
Yamaha Golf Cart Valve Adjustment - Drive G29 - Drive 2 - QuietechPower Equipment Man
zhlédnutí 14K
2001 EZGO TXT, Gas - Its Sluggish, Popping and Getting Hot!Kevin's Golf Carts
zhlédnutí 8K
1996 Club Car DS, Gas - It's Not Running GoodKevin's Golf Carts
zhlédnutí 7K
2017 Yamaha golf cart low power problemBrenden Huibers
zhlédnutí 4K
Yamaha G2 gas golf cart.....can we make it runAutomedic Garage
zhlédnutí 4,9K
2002 EZGO TXT, Gas - Hard Starting, Smell of GasKevin's Golf Carts
zhlédnutí 42K
Yamaha Golf Cart G29 Carburetor Swap fast.Camaro Mods Channel & Product Reviews
zhlédnutí 12K
2001 EZGO TXT, Gas - Crank, No Start, Adjust Valves, Bad Piston RingsKevin's Golf Carts
zhlédnutí 29K
Testing Rail Car on Abandoned Railroad with 100 Year Old Tunnel and TrestlesMatt Spears
zhlédnutí 1,2M
Hojení bodné rány nožem při carnivor stravě | Očima vojáka speciálních sil | #mscrewpodcast #podcastMichal Šopor
zhlédnutí 169K
Survive 100 Days In Nuclear Bunker, Win $500,000MrBeast
zhlédnutí 157M
Attack a Terezka jdou na rande… KVÍZ LÁSKYAttackShorts
zhlédnutí 567K
JAK SE ŠKRTÍ?!! #alkan_ #fortniteAlkanhraje
zhlédnutí 133K
Kdo je silnější??? 🔥🔥🔥Aleš Lamka - Fitness
zhlédnutí 189K
Pick a Color, I'll Buy 🟪🟨Brianna
zhlédnutí 38M
The Real Process of Harvesting Honey 🐝🍯 #funnycats #funnyvideo #reaction #honeyMeowtropolis
zhlédnutí 5M
艾莎撒娇得到王子的原谅#艾莎在逃的公主
zhlédnutí 47M
A few years ago I quit my job of being a dealership mechanic at Honda and went into a position that required me to work on small engines and a whole lot of janitorial machines. I work on just about anything. Watching your videos helped me out so much because of the many different golf carts we have coming in. I wanna thank you so much for helping me out! You also inspired me to start my own channel on the different machines I fix! Thanks a ton!!!
Hi Kev.... I am Darrell from Cambridge UK. I have been a subscriber to your videos for years. I love your tutorials on how to repair the golf carts/buggies (in the UK we call them buggies). I love your honesty when you cock up when doing a repair 😁. Most importantly is you always show the end result of a perfect repair. Thanks mate keep the videos comming ..... Darrell...
Kevin anxiously awaiting your next video. Could you maybe do a video on winter storage and how to protect golf carts to make them winterized? Thanks buddy have a good one.
Great suggestion!
Thanks!
Hey Kevin good to hear from you again it's been awhile! We have 5 yamaha drives at our course, that wire fails alot! The wire is constantly moving due to the motor placement. Poor design in my opinion. On average 2 fail a year. Using a longer wire helps reduce the movement somewhat, but it will fail again. Thanks for the video! I'm sure it will help alot who don't know this problem!
This is actually the first one that I've had come in with this issue. I work on a lot of Drives (routine service mostly). I usually see this on lifted carts, not stock ones.
Hindsight is 20/20. Thanks for taking us along.
I didn’t see it either Kevin. Until you bumped it. You are definitely NOT STUPID! Thanks for your honesty anyway. Great job Kevin!
Honestly is the key. Thank you I found it very interesting and helpful.
I personally like to use a old school bulb style test light to test solenoids because ive seen many times a multimeter give false positive readings due to no amp load.
I use both, but my go-to is a quality multi-meter. Test lights can't show voltage drop.
Thank you for sharing Kevin 😊
I have a Yamaha drive not sure the year because it has a custom paint job, and rear seat with lights, otherwise stock. When in neutral if you put the petal in one spot with the key on it will not stop surging, I know that it’s been 5+ years sense it’s been serviced at all besides airing up the tires, it’s very dusty to the point that it should have been done some time ago. I think that the clutch is bad and needs a belt but not sure if the carb is making it surge or the clutch. Thanks!
Where has Kevin gone? Been waiting to see a new video. Been 8 months, hope everything is good with you sir
Everything is good. Its just been super busy with a lot going on. I should be back to making videos real soon.
Hi Kevin,
I have a 2001 club car ds that has been experiencing cut off during driving (no crank or start) for a little over a year now. A month or so ago it completely stopped and will no longer respond.
I started by replacing the microswitches which did not help, then moved to the solenoid. I replaced it and the cart sounded great, I pulled it out of the garage in reverse and drove it for a minute or two then stopped it and put it in drive. When I did this, the cart would no longer crank or start. I let it sit for a week and then tried it again. I put it in service mode and neutral and it sounded great yesterday. But then I put it in drive and it no longer responded. When I put it back into service mode the solenoid now makes a loud vibration noise when I press the gas, almost like a growling and nothing responds Today I took the starter generator out and cleaned/ checked it. The brushes looked good but inside the bell there was a lot of dust and carbon. I cleaned it up, put it back in and wired it and still am getting nothing but a solenoid growl. Voltages up the the starter generator all seem to be normal, so I am at a loss going further. Any tips or suggestions
Lucky for the customer it didn't end up going big bucks. Kevin, do you have a vendor or brand you prefer for an EZGO starter generator. I did a rush repair for a friend that was in a hurry and went with an Amazon starter. Well, as usual it turned out to be junk, low output 12.4v in 2 months. It won't keep the battery charged. Thanks.
Hope all is good. Sure, do miss your videos
I'm hoping to be back making new videos in the coming weeks. Thank you for your concern!
I have a Yamaha g22 that i have replaced five starter generators on in the last few years. I've replaced the petal switch and voltage regulator. When running, the system charges the battery like it should. I'm lost as to what could be the issue. Any advice would be appreciated. Love the content!
Your favorite, the Yamaha Drive!! 😝
Nice work!
Thanks!
I would almost guarantee that the troubleshooting fault tree does not include a broken terminal. The heat shrink should help with water intrusion and corrosion.
Kevin, I recently purchased a Yamaha g29/drive, gas powered. I don’t know the year because of the custom paint job. When I got it it needed a oil change and filter cleanings, but I thought it smelled really strong of fuel, and after riding for about 40 minutes then park it, when I would go to ride it 30 minutes later it would be chokeing on to much fuel! So I cleaned the carb when I had the air box of I saw that the fan cover was filled with a rodents home, probably why it would get so hot, I greased the cluch, I know it needs one, and a belt. And a battery. But my question is : why is my check engine light on?? It has the proper oil level! And it’s only on when the petal is being pushed down. Why is that so? Nervous to ride it with it on. I googled the symptoms but couldn’t find anything so I figured I would ask you! Please help.
You have to start somewhere and sometimes the angle makes things appear what they are not at a glance 🤷♂️
Sometimes the camera can see what I can't.
Hi Kev. I’m Robert from Northern Ireland. I love your videos. Can you tell me how to adjust a Yamaha carburettor float level ! my float is completely plastic no metal tag that you can push up or down. My float is low and I think it should be level when held upside down !
Unfortunately, there isn't any way to adjust them.
Hey Kevin, what’s up Dude ….? Really missing you videos ! What Happened. Best wishes.
Hey Eric! All is well. I have a few videos in the works and a couple already uploaded and ready to go live next week. Thanks!!
I wonder if kevin is making any more youtube videos❤❤❤❤
Eventually. I'm still alive lol.
@@Kevinsgolfcarts I hope all is well with you. I miss your videos. And will remain on standby for new ones
All is well. There just has been a lot going on that has taken more time than expected. I hope to get back to making videos soon.
Kevin, completely off subject. I completely lost headlights last night on my Yamaha G19 gas. I wanted check the headlight fuse but have no idea where the panel is. Ive looked all over!
Typically, the lighting circuit is just a seperate system entirely. The fuse should be, depending on the brand of light kit, by the battery. Its possible the head light switch is bad too.
@@Kevinsgolfcarts thanks, Kevin. I'll check them both! Much appreciated.
😪 'promosm'